How to make a deal or switch?

Similar Questions

• How to make the Radio buttons switch automatically?

  Hello
  
  I have this code, all I want to do is make each JRadioButton be verified every time that the expiry of the timer.
  can you please take a look at my actionPerformed and tell me what I'm missing?
  
  Thank you.
  

  package kash;
  
  import javax.swing.*;
  import java.awt.*;
  import java.awt.event.*;
  import javax.swing.border.BevelBorder;
  import javax.swing.border.Border;
  import javax.swing.border.TitledBorder;
  import org.jvnet.substance.skin.SubstanceRavenLookAndFeel;
  
  public class ModulesInnerPanel extends JPanel implements ActionListener {
      
    protected ButtonGroup appChoserGroup;
    protected JRadioButton payRollRB;
    protected JRadioButton scRb;
    protected JRadioButton cashNbanksRb;
    protected JRadioButton outSourcingRB;
    private JButton enterButton;
    private Timer t;
    
    
      public ModulesInnerPanel() 
     {
       setLayout(null);
       setBackground(Color.RED);
       setOpaque(true);
       //BORDER
       Border bevel = BorderFactory.createBevelBorder(BevelBorder.RAISED);
       Border b = BorderFactory.createTitledBorder
               (bevel, 
                "User's Modules",
               TitledBorder.DEFAULT_JUSTIFICATION,
               TitledBorder.DEFAULT_POSITION,
               new Font("Helvetica", Font.BOLD,  16),
               Color.white);
       setBorder(b);
       //END BORDER
       
       //RADIO BUTTONS
       appChoserGroup = new ButtonGroup();
       
       payRollRB = new JRadioButton();
       payRollRB.setText("Payroll");
       payRollRB.setBackground(Color.DARK_GRAY);
       payRollRB.setForeground(Color.white);
       payRollRB.setSelected(true);
  
       scRb = new JRadioButton();
       scRb.setText("Stock control");
       scRb.setBackground(Color.DARK_GRAY);
       scRb.setForeground(Color.white);
  
       cashNbanksRb = new JRadioButton();
       cashNbanksRb.setText("Cash and Banks");
       cashNbanksRb.setBackground(Color.DARK_GRAY);
       cashNbanksRb.setForeground(Color.white);
  
       outSourcingRB = new JRadioButton();
       outSourcingRB.setText("Outsourcing");
       outSourcingRB.setBackground(Color.DARK_GRAY);
       outSourcingRB.setForeground(Color.white);
  
       enterButton = new JButton("Enter");
       enterButton.addActionListener(new ActionListener()
       {
           public void actionPerformed(ActionEvent e)
           {
              if (payRollRB.isSelected())
              {
                JOptionPane.showMessageDialog(null,"Application under construction", "Info", JOptionPane.INFORMATION_MESSAGE);
              }
              else if (scRb.isSelected())
       JOptionPane.showMessageDialog(null,"Application under construction", "Info", JOptionPane.INFORMATION_MESSAGE);
              else if (cashNbanksRb.isSelected())
       JOptionPane.showMessageDialog(null,"Not available", "Info", JOptionPane.INFORMATION_MESSAGE);
           }
       });
  
       //adding Radio Buttons to the Radio Button group
       appChoserGroup.add(payRollRB);
       appChoserGroup.add(cashNbanksRb);
       appChoserGroup.add(scRb);
       appChoserGroup.add(outSourcingRB);
       //END RADIO BUTTONS
       
       //SETTING LAYOUT
       Dimension d1 = new Dimension();
       d1 = payRollRB.getPreferredSize();
       
        Dimension d2 = new Dimension();
        d2 = scRb.getPreferredSize();
        
        Dimension d3 = new Dimension();
        d3 = cashNbanksRb.getPreferredSize();
        
        Dimension d4 = new Dimension();
        d4 = outSourcingRB.getPreferredSize();
        
        Dimension d5 = new Dimension();
        d5 = enterButton.getPreferredSize();
        
       payRollRB.setBounds(20, 20, d1.width, d1.height);
       scRb.setBounds(20, 40, d2.width, d2.height);
       cashNbanksRb.setBounds(20 , 60, d3.width, d3.height);
       outSourcingRB.setBounds(20, 80, d4.width, d4.height);
       enterButton.setBounds(20, 150, d5.width, d5.height);
       //END SETTING LAYOUT
       
          //ADDING ITEMS TO THE PANEL
          add(payRollRB);
          add(scRb);
          add(cashNbanksRb);
          add(outSourcingRB);
          add(enterButton);
          
          t = new Timer(500,this);
          t.start();
     }
      
      public void actionPerformed(ActionEvent event)
      {
             
            if (payRollRB.isSelected())
            {
              
              scRb.setSelected(true);
            }
            
          if (scRb.isSelected())
          {
            cashNbanksRb.setSelected(true);
          }
            
          if (cashNbanksRb.isSelected())
          {
            outSourcingRB.setSelected(true);
          }
          
          if (outSourcingRB.isSelected())
          {
            payRollRB.setSelected(true);
           
          }
      } 
  }

  I want the option buttons to change the selection one after the other (...)

  Ok. So, use the block if/then/else, as suggested in my previous answer (I added that, in your NBS and it worked).

  When the user presses enter switching must stop and it should have control over the Group of radio buttons.

  Then, you should stop the timer in this button actionPerformed.

  Kind regards

  J.

• How to make a single Boolean switch continuously on time bases?

  Hi all

  I'm new to labview. Tips for creating a Boolean remains off for 15 minutes, switches ON for 5 seconds, I ask... again, the same cycle should be repeated continuously. I want to start my logic by using the time of the system...

  Please guide me.

  Thank you

  Here's yet another one:

• How can I make new vNetwork Distributed Switch active?

  When right click on data center to create the new vNetwork Distributed Switch, the menu is not able (gray color). How can I make new vNetwork Distributed Switch active?

  Thank you!

  George

  To use vNetwork Distributed Switch, you need the license of vSphere Enterprise Plus.  Another version of vSphere does not include this feature.  You also need a vCenter Server license.

  Best wishes / Saludos

  -

• Search bar displays only the icon. How to make it back to normal?

  Search bar displays only the icon. How to make it back to normal?

  Normally, the search bar looks like the photo in this link.

  http://www.SimpleHelp.NET/images/googlesearchicon/img03.jpg

  However, I only have the icon in the face and no space to type the search information. How can this problem be solved?
  Is it because of my Add-ons?

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• How to make your own Board BNC connector for 37 pins PCI-6010?

  This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

  I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).
  
  
  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".
  
  
  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.
  
  
  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

  It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)
  
  
  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)
  
  
  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

  But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

  Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.
  
  
  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)
  
  
  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).
  
  
  • Ten for PFI/digital lines. Outers will connect to GND D.

  Up to a maximum of 29. You want maybe less, depending on your application.

• How to make a free software for my laptop newly formatted? In addition to Windows 8.

  How to make a free software for my laptop newly formatted? In addition to Windows 8. I have an extended warranty at the dealer where I bought my laptop and do not know if the installation of free software is covered. But I want to do it myself if the resources are available.

  You can order Windows 8 update from the following link:

  http://www.windowsupgradeoffer.com/

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• HOW to download IOS on 3560 switch

  How to download IOS on 3560 switch, see that all options I get...

  Run the following commands:

  (1) flash_init

  (2) load_helper

  Then you need to change the speed of transmission on the switch, otherwise it will take about 2 hours to transfer the IOS via xmodem.

  (3) set to 115200 BAUD

  After you issue the command on the switch baud rate make sure that you also change in Hyperterminal or other software terminal emulation software you are using. Otherwise you will not be able to connect to the switch.

  "(4) copy xmodem:" image_filename.bin"flash:" image_filename.bin. "

  (5) in Hyperterminal select 'Transfer' and select 'send file '. Replace the xmodem Protocol. Then select Browse and navigate to where you stored the IOS you want to transfer to the switch. Click on send.

  The transfer will take about 30-40 minutes.

  6 boot) flash: "image_filename.bin"

  The new IOS should start at this point. If you need more in depth instructions see this link.

  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3560/software/release/12.2_44_se/configuration/guide/swtrbl.html#wp1099467

• How to make the icons of programs appears on the screen of windows 8

  Hi Thunderlight, you helped me with my last request and thank you again now I have another question that you might be able to help me with.  How to make the icons of programs appears on my screen of windows 8?  I had to download the debut8 when I had windows 8 so I would have the appearance of windows 7 until I have to use Windows 8.  And some of my icons of windows 7 on my windows 8, but not all.  How to go on my windows screen 8 tiles?   I now get more usage of windows 8 and use it more now so would like all my original programs that I had with windows 7 on my windows 8 as it is now tile.  I thank you and hope you can help.

  Hi Laura,

  In theory, when you switch from an earlier version of Windows to Windows 8 - as your installed applications are kept by the upgrade process, except those who are not compatible - you should find all your apps in Windows 8.

  If they all do not appear on your start screen follow these steps to pin them there:

  • [Win] + C
  • Search
  • Click anywhere in the top middle of the screen to hide the charm bar

  All installed applications are displayed. They do not necessarily correspond on a single screen to use the horizontal "lift" to bottom of the screen to move to the right / left

  • Right-click on an application, you want to pin to the start screen
  • Click on Pin to Start at the bottom left of the screen

  You are finished. A mosaic of this application is available on the start screen.

  If there is an application, you are sure is installed on your PC and you don't think through the steps made me know - there will be more complex...

  If you install a new application under Windows 8 the corresponding tile is automatically added to your start screen.

  Hope this helps

  See you soon

  LZ.

• How to make links open in Google Chrom default?

  Original title: default email application?

  Hello. I worked hard to make 8 usable and more like Win 7. I have disabled the lock screen, bought Stardock Start8 software so I can use my PC, turned off all hot corners and charming bars, or whatever they are called. I removed almost all of the pre-installed apps and app Store of Windows.

  I'm trying to figure out how to make Google Chrome open when clicking on an e-mail link? Or at least make Windows Mail using my gmail account. I have an Outlook account but I did not intend to actually use it (I use gmail for years and do not intend ever to switch).
  Thank you for your help.
  PS Normally I would never spend a lot of time to win 8 functional but unfortunately I was unable to install one on my XT of spectrum HP Linux distributions
  :( Don't know why...

  What is your default e-mail program?  All default values set for this program in the control Panel\All Control Panel Items\Default Programs\Set default programs control

  See if these registry entries refer to your e-mail program.

  HKEY_CLASSES_ROOT\mailto\shell\open\command

  HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail

  Apply your default e-mail to Gmail

  https://support.Google.com/mail/answer/10966?hl=en

• How to make a website in several languages

  How to make a website in several languages

  No magic. You design them as separate files of Muse and switch between languages using explicit links pointing to the same pages in a different language-specific subfolder. If you have already published your site, you should know all the links and the names of final document easily.

  Mylenium

• How to make a square patterned with the same race grounds match-up?

  I have a square that is filled with a pattern, he needs a stroke to so that it can be scalloped.  How to make the model of race and fill out the template match-up?

  You could have transformed one of the models. I try and first just apply a color background and outline of bost. Then apply the model again and not become one of them.

  Another option would be to expand the line and fill and combine the shapes, so that you don't have to deal with the construction of a complex.

• How to make the transition to digital in 10g

  Hi all
  
  
  We have 10g database of primary and standby, I have never worked before sleep, customer wants me start switch, can you please let me know how to make the transition to digital in 10g.
  
  
  Thank you very much.

  It's the way I'm following passage in the
  ------------------------------------------------------------

  (1) check that there is no active users connected to databases.
  (2) select message from v$ dataguard_status;
  (3) select protection_mode from database v$.

  Step 1 check if it is possible to perform a failover.

  SQL > select database_role, db_unique_name, SWITCHOVER_STATUS, v database name $;

  DATABASE_ROLE DB_UNIQUE_NAME SWITCHOVER_STATUS NAME
  ---------------- ------------------------------ -------------------- ---------
  PRIMARY OFMSREGT_SIM UNAUTHORIZED OFMSREGT

  SQL >

  If you get NO allow status for SWITCHOVER_STATUS, verify that the standby database is connectivity.

  If the SWITCHOVER_STATUS column displays ACTIVE SESSIONS, you can successfully achieve a failover by adding the WITH clause LOGOFF to the statement ALTER DATABASE COMMETTRE through PHYSICAL standby

  Step 2 open the passage on the primary database.

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP MOUNT;
  SQL > ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICAL;

  Step 4, check the transition state in the view V$ DATABASE.

  SQL > SELECT SWITCHOVER_STATUS FROM V$ DATABASE;
  SWITCHOVER_STATUS
  -----------------
  TO_PRIMARY
  1 selected line

  Step 5 place yourself in the role of physical standby database target the main role.

  You can switch a standby database physical role ensures the primary role
  When the standby database instance is mounted mode redo apply or open
  for read-only access

  SQL > ALTER DATABASE COMMIT AT THE GRADE CROSSING;

  Step 6 complete the transition of the database ensures the main role.

  If the physical standby database has not been opened in read-only mode since the
  the last time it was started, run the SQL ALTER DATABASE OPEN to open
  the new primary database:

  SQL > ALTER DATABASE OPEN;

  If the physical database was opened read only since the last
  time it was launched, you must close the database waiting for target and restart:

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP;

  Note: There is no need to close and restart other bases before (not involved in the digital switchover) who are online at the time of the failover. These databases on hold will continue to
  function normally once the failover is completed.

  Step 7 if necessary, restart log apply services on standby databases.
  He must deliver the command FRO repeat apply as:
  SQL > change database recovery managed standby database disconnect from the session.
  or
  And stop repeating applies to give
  SQL > alter database recover managed standby database cancel;

  Step 3 Shut down and restart the former primary instance.

  SQL > SELECT OPEN_MODE FROM V$ DATABASE;

  Step 9 check the synchronization between the primary and standby:

  Primary
  SQL > select thread #, max(sequence#) in v$ archived_log where archived = 'YES' group by thread #;

  Sleep mode
  SQL > select thread #, max(sequence#) in v$ archived_log in case of application = 'YES' group by thread #;

  Stop the former primary instance and restart and mount the database:

  Sense of SWITCHOVER_STATUS
  --------------------------------------------
  The column SWITCHOVER_STATUS of v$ database can have the following values:

  NOT ALLOWED - this is a database of pending and the primary database has
  not been first switched, or it's a back-end database and there is no data pending.

  ACTIVE SESSIONS - indicates that there are active sessions of SQL attached to
  the primary database or emergency that must be disconnected before the
  failover operation is allowed.

  Transition to THE PENDING - this is a database of relief and the primary database
  application of the digital switchover has been received but untreated.

  LATENT pass - the digital switchover has been waiting mode, but has not completed
  and I went back to the primary database.

  Primary SCHOOL - this is a database of pending, any sessions active, i.e.
  allows to switch to a primary database.

  In STANDBY mode - this is a primary database, any sessions active, i.e.
  allows to switch to a standby database.

  RECOVERY NEEDED - this is a database of pending that has not received the
  application of the digital switchover.

• How to make animated gifs to work in FCPX?

  Hello

  How to make animated gifs to work in FCPX?

  They work in FCP7 (FCS) but not FCPX. Strange.

  assailed

  Elmer

  If you had FCP7, you have Quicktime 7 Pro (upgraded automatically at installation FCP7). Check your Applications > Utilities folder.

  Open the gif in QT7 and export as... (Sequence Quicktime Movie > Open Options)... might as well go with ProRes LT and make sure that you pay attention to the size option (select current if the original is 100%).

• How to make live iPhone photos 7

  How to make a live Webcam picture on my new iPhone 7

  

  http://help.Apple.com/iPhone/10/#/iph1e767793c