How to make a grid or table?

Similar Questions

• How to make the Mobile friendly tables or convert

  Hi again! I have an obvious problem with that I think has a very obvious solution that I already know, but I thought I'd come here first in the hopes that I could save time. I've been remodeling an older site to have a newer look and be mobile friendly as well. Some of the pages on this site use tables, I prefer to use the divs because they are easier to change the layout if necessary for phone or tablet. As it is, there are a lot of pages using complex tables, those who have been on the site before I even and resumed the work on this site. So my question... Is it possible to make friendly mobile tables? If not, is there a way to convert rapidly about 150 pages of html to use divs instead of tables outside to manually enter in each page and gradually replace each part of the table?

  Here is the table that I'm trying to make mobile friendly or convert:

  Rental management company - < this link here.

  My main reason for this request here is because it would take me a VERY LONG time to go through each page one by one for the tables for divs. Maybe someone here has a solution? As always, any help is greatly appreciated.

  The tables are a great challenge in the propulsion back.  At one point, they stop to resize.  Look at solutions of Bootstrap for sensitive Tables.

  http://GetBootstrap.com/CSS/#tables-responsive

  Nancy O.

• How to make querys with the table field names by ': ' in the

  Hello
  
  When I write a SQL query for a set of data in the BI Publisher I can't make queries containing fields with ":" in the
  
  as this left join - how can I say BI publisher is not to treat the field "SEQ_UDSTATUS:" as a parameter?
  
  
  LEFT JOIN [SDE]._SMDBA_._UDSTATUS_ tblStatus on tblIncident. "" SEQ_UDSTATUS: "= tblStatus.SEQUENCE

  If the report query is based on DB directly, better to use a view

  SQL query is perfectly valid, but BEEP does not allow it.

  No doubt you can trigger an SR to Oracle, they might take it as an improvement.

• How to make the grid multi color line

  Hello

  I need to draw a curve with a line of several color as an attachment.

  How can I do?

  You can place different colored cursors.

• QuickTime Pro - how to make a type of Brady bunch in video...

  Hi everyone - I'm doing a film type Brady Bunch for my wedding. The basic idea is that my bridal party mime along a song and its display in a mosaic of Brady Bunch effect... I am registered and just really struggled with Quicktime Pro - Ive downloaded the Pro part of it... but I can't work on how to make a grid of movie... any help would be appreciated!

  I'm doing a film type Brady Bunch for my wedding. The basic idea is that my bridal party mime along a song and its display in a mosaic of Brady Bunch effect... I am registered and just really struggled with Quicktime Pro - Ive downloaded the Pro part of it... but I can't work on how to make a grid of movie... any help would be appreciated!

  If I understand correctly what you want to do, the basic strategy is the following...

  (1) create video clips that you want to merge into a single player to create your space video editing (rather than temporal). (I.e., Audio and/or the content of each video clip is more later extracted from its source file merged together as independent data tracks in a single-file container with a maximum limit of 99 tracks.) NOTE: It is usually better to create or pre crop your videos to the format of image that you want to display in your final file. While the poster may change subsequently, chasing elongation may introduce distortion of object in the final poster.

  < image edited by host >

  Here is a collection of files that I used to create a file of example of which, according to me, you try to accomplish.

  (2) once the individual clips have been created, the next step is to extract/copy the data of your main working file. I normally recommend a workflow 'extraction' here to eliminate the possible accidental change in sourcing video clips that may or may not be needed later - especially if you can be prone to make mistakes during the learning process or need to re - edit track content later for one reason or another. In this case, the video tracks of the first 8 files posted above will be merged together as 320 x 180 'windows' in a grid 3 x 3, playing in a display area 960 x 540. The 9th (central area of window grid) will display a "title" image PNG which will be added later with a single audio track. The result will look something like this:

  < image edited by host >

  In my case, the videos are displayed is attached directly to the other and without borders. Show images title, borders, scaling and positioning of the content is all areas in which you can express your individual creativity so the image above is presented just as a small example of what can be done.

  (3) the next step is to open/create your 7 QT main window work (target player) Pro. To make this simple select the 'New player' option under the menu 'File' of QT 7 Player.

  (4) at this point you repeatedly open your video clips source one by one, extract data from a track audio and/or video you like, store their pointers in the temporary memory, select the target drive and then copy references to date of temporary storage track in the new player. Most of these operations, you want to open and use the 7 QT Pro fenΩtre 'PropriΘtΘs' ('Command-J' keyboard shortcut).

  

  The base this workflow is to open/select the video file source, open the 'Properties' window, select the data track, you need to extract/copy, press the button "Extract" to extract the data from a separate playback window (to avoid accidental loss or modification of the original file), select the player window newly extracted, press the "Command-A" keyboard shortcut to select the entire track (or change the track if necessary before using the shortcut) , press the keyboard shortcut "Control + C" to copy the reference to the memory track, select the target drive window, open the 'properties' if it isn't already open, make sure that the playhead is an insertion point in the timeline panel and press the hotkey 'Command-Option-V' (or select 'Add' option menu change) to copy the track to your target file.

  At this point, you can close any unnecessary player windows always open and repeat the operation until all the data of video clip has been added to your target drive. Your 'Properties' window for the target player should now look like this:

  

  (5) the next step is to scale and/or get compensation for the display of individual video tracks. This can be done immediately after inserting the video tracks individual or all at the same time. I encoded my files to the resolution and the appearance I wanted to display, I didn't need to scale my files in this example. In any case, go to the widow of 'Properties' of the working file and select the video track, you want to work. Once the track is selected, open the tab "Visual settings" piece of tat in the half lower the window "Properties". Enter values waterproofing if necessary, but try not to change the proportions of the display. Then adjust the values of offset for each track so that the individual display areas do not overlap each other. In my case, it was implemented first video track to an offset "0 x 0. Because my songs were to be displayed in the boxes to display 320 x 180, additional video tracks were offset 320 x 0, 640 x 0, 0 x 180, 640 x 180, 0 x 360, 320 x 360 and 640 x 360 with the offset of Center (320 x 180) reserved for future use by my 'title' PNG image. Video tracks are normally assigned to layers automatically when added to the target file. These layer assignments may be changed if necessary for duplication, but since none of my pieces overlap, I have all my video tracks placed on layer '0 '. (However, this was not something you need to worry at the moment.)

  (6) using the same basic strategy, I opened my PNG image in a window of player QT 7 and used the keyboard shortcut "Command-A" and "control + C" to copy the image into the temporary memory. However, since I want this image image displayed during the entire period of the reading of the final file, I use a different strategy to copy it in to target player. In this case, I select the target player and the keyboard 'Command-A' to select the length of the file. At this point, I can use the menu 'Edition' the option "Add to selection and Scale" (shortcut of keyboard 'Option-shift-command-V') to display the image copied for the duration of the file.

  (7) the last data track, which I have added to my sample file was the audio track. Here once again the strategy of the video track is used to extract everything first and then copy/add data to the target file. This concludes the copy of data workflow and I recommend that you use the "save under...". "Option from the file menu to save your project as a MOV file standalone.

  (8) at this point, you can cut your file if necessary. In my case, all video tracks (as well as the audio track) was of different lengths. In my case, I started reading all the content at the beginning of my file, but you can offset the departure of any track anywhere in your timeline if you want. (Another chance for you to express your individual creativity that can be desired). However, since each of my video track ends at a different point during playback, I found it interesting to cut my file at the point where the audio track ends and before the last video track ends playback. Basically, you can use the 'I' and keyboard shortcuts "O" to define 'in' and 'out' points for your target video if you want. Once these are defined, you can use the Edit option "Trim to selection" menu to physically cut your project file.

  (9) when the project is complete, you can export it to a format of final distribution. In my case, I used the El Capitan Finder 'Convert' possibility of embedding to transcode the project file M4V h.264/AAC high quality to "flatten" all the contents of simple video and audio tracks. The target format was probably "overkill" for my purposes, but provides a good example of what you can do according to the time and effort that you can invest.

  (10) this is the URL to the 'project' and the final output files "" in case you want to review. (Option-click on the link to download copies.)

  

  < published by host >

• How to create a Ref cursor table

  I have a proc that returns a Ref Cursor, what is the easiest way to create a table based on the return of the ref cursor?
  
  declare
  type rc is ref cursor;
  p_data rc;
  Start
  call_my_proc (p_data);
  : result: = p_data; ((- If I run this in TOAD I can see the data here, but I want to create a table based on it rather than showing)
  end;
  
  
  Thank you.
  
  
  Edit: sorry. typed this wrong, first time, should be right now

  I recommend you read this first... {: identifier of the thread = 886365}

  and then you'll have a better idea of how to make to create a table in your query.

• How do I make content detailStamp af:table always visible

  Hello

  I use JDeveloper 11.1.1.7

  I want to show master detail content in a tabular format. Therefore I used < f: facet name = "detailStamp" > in af:table to see the details.

  The details are available inside the retractable container. I want to show all the content inside the detailStamp always visible when opening the page.

  How can I achieve this. Kindly help me.

  I need to show the master detail contained in the following format, but details must always be open. Now, I can only see the details in disclosure of the line manually.

  

  Thank you

  John.

  See similar post

  How to make the detailStamp facet in table expanded by default?

• How to make the blue grid? PDF file at this link...

  How to make the blue background of the grid and the photo? PDF file at this link:

  http://www.grad.HR/Mostovi/files/masivni/04_masivni_mostovi.PDF

  I need to print, but with all this color, it would be a terrible blow to my toner!

  p.s. I have Presentation adobe acrobat x pro...

  You could do it with preflight check, but the more fundamental question is whose record is this? The author applied this model to prevent people of the cloth located below print / of copy, and you have permission to edit the document? These forums never will help people engage in copyright infringement.

• How to make a magnifying glass link to a look up table?

  Dear friends,
  
  Hello. I develop the application of accounting journal entry. Journal line, I use the image "magnifying glass" next to each field in the table. When you click on the magnifying glass, it is supposed to come a look up table (a graph and a table of name mapping), and we choose the appropriate chart to enter the field of the table.
  
  I understand to create another page for the look up table and record. But I do not understand how to make a magnifying glass link to a look up table. Can someone tell me how to do this? Thank you.
  
  
  Lucy

  This is how it works,
  Table A (which stores the fields of graph). You used A table fields on a page so that users can enter data.
  You do not need to put a magnifying glass image or create a new page to achieve the look to the top of the page.

  all you need to do is create another table say table B, which should have the graphic field and the description to display on the search page. Then open folder field property field chart table A and table B as quick picture to mention.

• How to create a grid/table in Fireworks CS4?

  I hope I'm not something obvious missing here. We have designed an application that involves a lot of data entry, so in my prototype, I want to make some sort of table or grid of Gizmo (think Excel) but can't find anything like that in the common library. Any suggestions?
  
  Thank you
  Jim

  Thank you, Dave. I would be actually found this one but wanted to see if I was missing something already available in FW. But your suggestion I downloaded, tried and I think he'll do just what I need. Thank you!

• How to make a GRANT previliage on a table in a different database?

  How to make a GRANT previliage on a table that is in a different database (different host)?
  
  Published by: user10980630 on April 6, 2009 05:18

  Create the link of database between databases and give GRANT to any table on the database

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com

• How to make tables with rounded corners! (help)

  Using framemaker 11 and I can't seem to find a way to get the corners rounded on a table.

  The only way is a way to fake and draw a rectangle rounded on the table without borders. I've implemented a program to import this document into another document, but it does not have the rounded rectangle but takes the table. What gives?

  So the only methods I see work is to find how 1) corners rounded on a table, 2) have the rectangle 'stick' to the table then when everything is imported when I import the file, 3) create a graph of rectangle rounded out framemaker and import it in?

  Help, please

  Chris

  Rounded corners on the tables is a rare feature. There in no version of FM I've ever used (compared to 9), nor do all the worksheets that I use.

  My inclination would be to find an app that does (InDesign maybe?).

  Each table export to PDF.

  Import in a framework anchored on the FM band.

  >... a rectangle rounded on the table without borders.

  > But I put in place a program to import this document in

  > another document, but it does not have the rounded rectangle

  > but takes the array. What gives?

  A normal FM table does not represent an anchored frame. I guess you just draw on the page of the RR. It is not related to the content (a debit). Not only it does not export if you use this document as a source of text box, the RR will remain even with this table if the table to a different page of reflow number other content changes.

  You need create a block anchored.

  Equip the RR that.

  Also put a block of text in the AF.

  Set the table in the text frame.

  Adjust the RR to hit the table borders.

• How to make text tabled clothes out / disabled

  Hello
  
  I have a text field and I put the following property...
  

  HTML Form Element Attributes:- readOnly=true

  This field is read-only now.
  
  HOW to make this field looks like a field of disabled, something like filling in the background with the color gray.
  
  
  Thank you
  Deepak

  Hi Deepak,

  You can always add the width in the style:

  style="background-color:#E4E4E4; border:1px inset #F0F0F0; padding:2px; width:100px; display:block;"
  

  Andy

• Remove the view grid lines table Pivot

  Hi people,

  How to remove the view grid lines table Pivot? Any script must be integrated? If Yes, then please give me the details.

  Kind regards

  AJ

  This is how you do it,

  Take each of your lines and measures in the PivotTable, and then select the "Values of Format" option when you click on the menu options for each of the lines and the measures.

  In that set the border color to your "background color" which could be "white" and make sure that the border post has the value 'None '.

  That's your vision of pivot will not have the grid lines more...

  Please indicate if this help

• How to make fonts and icons in the menus for each larger screen?

  How to make larger fonts and icons in the menus on my iMac screen?

  You can change the size of icons, arrange them in a grid and set other preferences for items on your desktop by changing the options to display on your desktop. To change your desktop view options, click on the desktop and then choose the command view > Display Options from the menu bar. You can try different settings to see which ones you like, you will immediately see the effects of your changes.