How to make a site that has been blocked?

Similar Questions

• How to restore a file that has been lost and partially restored?

  I have it has not deleted, but when I started my computer a scan of indexing was performed for a deleted file.  What was restored was an older version of the deleted file.  There were parts of other files deleted also.  Or old version have been restored instead of the current version.

  I have it has not deleted, but when I started my computer a scan of indexing was performed for a deleted file.  What was restored was an older version of the deleted file.  There were parts of other files deleted also.  Or old version have been restored instead of the current version.

  It should be a little clearer, at least for me.

  What do you mean by "a scan of indexing was performed?

  What do you mean by "shares of other files deleted also?

  How the file was restored?

  Do you mean that you have run a chkdsk and it detected disk errors and attempted to remedy and that you are now looking to the files created by chkdsk (*.chk files)?

  The computer is configured to automatically perform a disk check.  He said this morning it was running a check disk and restore one of my files.  This file has been restored to a version much sooner, as well as several other files when I checked later.  I ran a check of the index that says he would restore the files, but that did not help.  It will only run chkdsk.  I think I'll have my paid gurus do.  Thanks for your help.

• How can I recover pictures that has been removed from my computer

  some how a folder with photos has been deleted and were not supposed to be I can get them back

  some how a folder with photos has been deleted and were not supposed to be I can get them back

  ===================================
  First of all, check your trash... perhaps that the folder is there.

  There are programs of software designed to recover the
  delete files... some detail and some are free.

  The following freeware is an example and you can
  find others with a Google search.

  For hard drive recovery, it would be preferable to
  Use the portable version and run it from external
  source such as a memory card or a USB flash drive to reduce
  the possibility of replacing the deleted files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery - features
  http://www.Piriform.com/Recuva/features

  Download Recuva
  http://www.Piriform.com/Recuva/builds

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  Good luck...

• How to make sure the OS has been started after Start-VM

  Reviews - Windows OS

  I'm following the tasks in a script.

  1. VM stop

  2 return instant

  3. start the virtual machine

  Command start VM, I perform certain operations continuous BONE. But orders start VM stops when start the guest operating system has started. How can I determine that Windows operating system has been started successfully and I can start the operation. Are there any available specific CMDlet to check the same thing?

  Of course, the following script does something like that

  $vmName = 
  $esxCred = Get-Credential -Credential "ESX-account"
  $vmCred = Get-Credential -Credential "guest-account"
  $myScript = @"
  net start
  "@
  
  $vm = Get-VM $vmName
  $vm | Start-VM -Confirm:$false | Out-Null
  # Wait till the VM is powered on
  while((Get-VM $vmName).PowerState -ne "PoweredOn"){sleep 5}
  # Wait till service is running
  $msg = $vm | Invoke-VMScript -HostCredential $esxCred -GuestCredential $vmCred -ScriptType "bat" `
                 -ScriptText $myScript -ErrorAction SilentlyContinue
  

  The variable $msg will contain all the services running on the client.

  You can check if the specific service you want to run is listed otherwise you browse these last lines, until the service is here.

  Something like that

  ....
  do{
     $msg = $vm | Invoke-VMScript -HostCredential $esxCred -GuestCredential $vmCred -ScriptType "bat" `
                 -ScriptText $myScript -ErrorAction SilentlyContinue
     sleep 5
  } until($msg.Split("`n") | where{$_ -like "*Workstation*"})
  

  The condition "until the" translates $null as long as the text "Workstation" is not present.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to make reference to what has been activated in a TileList using an ItemRenderer

  Hello

  I have a Tilelist component and I use an ItemRenderer, which is a button.

  I do not understand how to refer to what the user has clicked. So, if the first tile (which is the first Explorer) is checked, how can I know that that an individual has been clicked.

  < mx:TileList

      id ="myTL"

  dataProvider="{myAC}"

  Width="400"

  Height="400"

  ='2' columnCount

  number of lines='2' / >

  < mx:ArrayCollection id="myAC">

  < mx:Array >

      <mx:Object id="first" label="1" />

      < mx:Object label="2" / >

      < mx:Object label="3" / >

      < mx:Object label="4" / >

  < / mx:Array >

  < / mx:ArrayCollection >

  ItemRenderer:

  "" < mx:Button xmlns:mx = "http://www.adobe.com/2006/mxml"

  Click = "Alert.Show ("this was clicked') '> "

  < mx:Script >

  <! [CDATA]

  import mx.controls.Alert;

  ]]>

  < / mx:Script >

  < / mx:Button >

  Thank you.
  -Laxmidi

  Hi Laxmidi,

  Using the itemClick event you can do this by using the event object. See the code example below:

  <>

  xmlns:MX ="http://www.adobe.com/2006/mxml" > ".

  Import mx.events.ListEvent;

  Import mx.controls.List;

  Import mx.controls.Alert;

  Import mx.events.ItemClickEvent;

  private function onItemClick(event:ListEvent):void

  {

  var strAlert:String = "line of the Index Clicked element:" + event.rowIndex + "\n"; "."

  strAlert +=

  ' Column Index Clicked element: " + event.columnIndex + "\n";". "

  Alert.Show (strAlert);

  }

  ]]>

  Click = "http://www.adobe.com/2006/MXML Alert.show" ( 'It was clicked') ">"

  Import mx.controls.Alert;

  ]]>

  You can also try this by writing the Click event on the button in the TileList as itemRenderer where you can easily access the itemClicked data easily using the data object.

  Thank you

  Jean Claude

• How to remove a contact that has been added to my address book when my Hotmail account has been hacked.

  My hotmail account has been hacked and they have added a contact in my address book.  I can't remove it because it does not appear when I got my address book, it appears only as a shipper when I compose mail.  Do I have to close my account or y at - it another way to remove it?

  Hello

  Given that the problem is related to hotmail, I suggest you to post the question in the forums and check them off below if it helps:

  http://windowslivehelp.com/solutions.aspx?ProductID=1

  It will be useful.

• An expired subscription affects a muse created site that has been exported as html?

  If it was exported to html format and the files downloaded on an another hosting site, the code somehow check the status of your subscription and disable the view if your subscription has been terminated?

  No, it isn't, but you can run into issues to keep the site updated with new widgets coming out all the time to Muse.

• How to change a photo that has been edited from Photoshop Elements psd file in a jpeg file and always keep "layers" or RGB functions that were suppose to be included and automatic with this program.

  When I try to 'save' the photo, I get a warning popup, saying only save as copy, as jpeg will not support the "layers".  The site that I want to download my photos requires jpeg only, but it must have space color Adobe RGB or sRGB...

  suezans89729982 wrote:

  When I try to 'save' the photo, I get a warning popup, saying only save as copy, as jpeg will not support the "layers".  The site that I want to download my photos requires jpeg only, but it must have space color Adobe RGB or sRGB...

  Your thread earlier today deals with the question of the layers, the JPEG file format is not supported. If you want to save the file with layers, save as PSD. To load the referenced site, save the file in JPEG format as well. After you have downloaded, remove the JPEG file if you are short of space.

  Go to Image > mode and make sure the RGB color is checked. When you go to file > save as, in JPEG, the ICC profile is sRGB IE C61966 - 2.1 (on my current test file).

• How to make a loop that records data block without having to navigate to it

  I have a form with 2 tabs. Tab_1 displays the information of the monitor and tab_2 raw_data (that the user attempts to insert/update or delete) for the monitor. The two tabs have a button 'Post production', which messages the raw_data (in tab_2) to the database. If it is an update operation, I have to check if a column_value_1 has changed from what is present in the comic book. If so, then the user should be given a warning. The warning would be appropriate if the column_value_1 for any 1 record is changed. Therefore, the comparison can be stopped after first difference. The code in the when_button_pressed trigger looks like
  
  go_block (raw_data());
  first record;
  loop
  If value_changed then
  v_alert: = true;
  "exit";
  end if;
  IF: SYSTEM. LAST_RECORD = "TRUE" THEN
  EXIT;
  ON THE OTHER
  NEXT_RECORD;
  END IF;
  end loop;
  
  If v_alert then
  display_alert;
  end if;
  
  This should work fine if I'm in tab_2 (which displays the block of raw_data). But if I hit the 'Post production' button tab_1, go_block (raw_data()) would go to tab_2, I do not want to make. So, how can I browse the raw_Data in tab_2 block without having to navigate to this tab?

  Prosper,

  I don't have what it is possible to loop in a block without having to navigate to it. Instead, you can navigate to the control you are calling by GO_ITEM integrated.

  Kind regards

  Manu.

• How to recover a document that has been replaced by another

  I typed up a test last week & had another type until today. I wanted to use the same layout I did for the other so I open previous & edited the info according to the numbered question. By chance I hit save him. NOT save as & the new assignment has replaced the last of them. I desperately need one of last week that it is due tomorrow & I won't have the time to type all upward again. In addition, I threw the draft documents (time of bonde) and have nothing to do now as all other material already submitted PLEEEEEEEAAAAASSEEEEE help me. Its a few pass or fail & if I fail, it will say the last 6 years of study have been for nothing. My teacher is a cold hearted troll who doesn't accept excuses.  Please help me =)

  Hello

  ·         What operating system is installed on your computer?

  Response with above information to better help you.

  I suggest you try the option of previous versions and check if you are able to find the file, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

  If you created the document using Microsoft Word and referring to the Microsoft Word document, I suggest you to send your query to the Microsoft Works community. Please visit the link below to find a community that will support what ask you:

  http://answers.Microsoft.com/en-us/Office

• How to make a miniature that has a gallery inside? And how can I make this gallery have embeded videos vimeo + Images?

  Hello

  I'm pretty new to Muse, so I don't know much about it, but I did a lot of research and have not found an answer to this question.

  I'm doing a portfolio site. The Web site will be a 12 thumbnails. But each thumbnail is a project, not a picture.

  When you click on one of the thumbnails, I want a viewer that will show you embeded videos vimeo mixed with images.

  Ex: A coca-cola project.

  Home page has a thumbnail of an image of coca cola. When you click it, it opens a viewer with a film of coca-cola, when I click on the arrow to the right, it shows a poster of cocacola, then another poster, then another video. (but they are all part of this gallery, which is inside the thumbnail.)

  Can you guys help me?

  Thank you!!!

  At each widget, wenn selected arrow, a little blue in the upper right corner. Clicking on it opens a panel:

  

• How to discover the field that has been activated in a time-new-record-instance

  Suppose that: a block several record. The user is positioned on a record existing on the land has
  
  Action: the user clicks on blank (new) record field B
  
  Question: How can I discoverer was clicked on field B in the times-news-record-instance? Already tried: system.current_item and: system.trigger_item. They both contain "field.
  
  Published by: user473811 on August 26, 2010 04:56

  Hello

  For the new record of recording/empty if the user tries to access any field, then cursor won't allow access this field. It will go to the first field in this block navigation or you use any variable as trigger_item/current_item system, etc. You can test when you click on any field cursor will go with force to the first field of navigation of this block. So in the case you always it will return A FIELD, which is correct. If the cursor remains on the field, then it will return this the name field that you can test for all previous records by accessing any field at random.

  -Clément

• I am a user of hotmail completely technologically inept at 60 years old that has been blocked. How can we TALK with a REAL person?

  I just recently signed to ancestry.com, but have saved in my hotmail account all sorts of family archives, information AND contacts for more than 5 years.

  I live in MN, and during one of our recent storms of snow when I was forced to stay at home, I worked like a demon on my family tree on ancestry.com.  During this operation, I received a message from me to be a SPAMMER!  As someone who knows NOTHING about technology - I never even sent a text on my phone, and even less was a "spammer", I just laughed it.

  Hotmail won't let me on my account and it made me great anguish.  I tried to answer their questions and even gave phone numbers where I can be contacted - nothing works.  I received a reply in a private forum, but I don't know how to do this - I'm not a stupid woman, but I really do not understand this and would be RAVI's TALK with someone!

  If anyone can help me with this, I would REALLY appreciate it!  And I DON'T think not that tech people take pity on those of us who still use land line phones, watch TV ONLY on screen in our living room, pay items with whites of the audit and the United States Postal Service to send our invoices.  Thank you.

  Patricia Enger

  Hello

  The question you have posted is related to Hotmail and will be much better suited in this community. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/

• How to recover a file that has been deleted by error in Vista?

  I can't find my file. I pressed a wrong key and it has disappeared-i have done search, tried to do a system restore. There is a file there w/1 page however, the file is 13-14 pages long. I clicked on properties and and it reads 19 k? Ineed help as soon as possible. I'm a graduate student this file is due on Sunday 4/24

  
  Thank you
  * original title - I pressed a key on the keyboard and my file missing-Ido do not know which key is *.

  Hello

  see if that will get it

  http://www.Piriform.com/Recuva

• How to make a site that I created in muse

  my computer crashed. I have a new computer. How can I change my site Muse again?

  If you do not have a backup of your file of muse you will have to start from scratch. The best practice is to synchronize your files in the cloud.
  It is this cloud was introduced.