How to make sure the OS has been started after Start-VM

Similar Questions

• vmrun start exists with the error: the operation has been cancelled after the upgrade to workstation 9

  My backup scripts stopped working after I upgraded my win7 x 64 welcome to the workstation since version 8 9.

  My simple script looks like this:

  vmrun.exe suspension myvm.vmx

  .. copy on the backup device...

  vmrun.exe start myvm.vmx nogui

  It's used to work without fault. But start with the return of order:

  Error: The operation has been cancelled

  What is interesting to note that if I run the command start again at a later date, it works fine.

  Any ideas?

  Thank you.

  gui.lastPoweredViewMode = full screen
  gui.viewModeAtPowerOn = full screen

  I wonder if this parameters are good for a virtual machine, you start with nogui option?

  Do you really need support of 3d? -did you try with deactivated 3d support?

• How to make sure the Animation still plays from the beginning

  Hi guys,.

  I'm working on a project to facilitate dashboard which consists of 3 animations. I have a problem when I navigate between each symbol, without allowing that each completed in full animation. Rather than play as they should, from the beginning of each animation, animation simply continues to play from the position as was the timeline when I navigated away to another symbol.

  
  

  Is it possible that I can reset the symbol in its original position, when I trigger another animation to make sure that each animation always time from the beginning?

  Has anyone else had a similar problem? Any help will be much appreciated as always.

  Thank you very much

  
  Ross

  All included now - it works, and you do not have the script fixed correctly.

  The only thing I noticed is the placement of you reading action, see capture.

  I didn't move a bit. And by that I mean set it so that the beginning of the fall of play icon AFTER the reading, the alignment exactly where the label of separation begins - see figure.

  In your case it was not aligned correctly. I also changed the read option play to play to 0:00.

  HTH

  Darrell

• ORA-00481 and Patch 3659289 - how to check if the patch has been applied? --

  Dear all,
  
  Currently my client uses the oracle 10.2.0.4.0 database (RAC). However sometimes during treatment (the application attempts to write/change data), they are several ORA-00481 errors and then the database crashed. But I'd say it's an automatic restart sort of as the newspaper has said.
  
  Trying to get on a few articles on this subject and found one saying this is due to internal bugs, and the problem solved with patch 3659289 .
  
  So far, I couldn't find much information about this hotfix (3659289) and I need some help here.
  
  1. I wonder if it is the case of my customer database?
  2. how to check if this specific hotfix (3659289) has been applied?
  3. be appreciate if you have access to this patch and post the details here.
  
  Advise, Suggestion or jokes will be appreciated. Thanks in advance!
  
  Thank you and best regards,
  CT
  
  
  
  Some additional information:
  1 version of oracle 10.2.0.4.0 database
  
  Connected to:
  Oracle Database 10g Release 10.2.0.4.0 - Production 64-bit
  With the Real Application Clusters option
  
  2 CARS with two nodes.
  
  3. in the course of running on Solaris 10 sparc infrastructure.
  
  4. what error log says:
  
  Sun Dec 4 00:51:09 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms1_16541.trc file:
  Sun Dec 4 00:51:34 2011
  Track of dumping performs id = [cdmp_20111204003639]
  Sun Dec 4 00:52:03 2011
  kkjcre1p: unable to reproduce the jobq slave process
  Sun Dec 4 00:52:04 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_cjq0_16598.trc file:
  
  Sun Dec 4 00:54:58 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lmon_16525.trc file:
  ORA-29740: expelled by Member 1, group incarnation 74
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_j002_14521.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_j000_29799.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  WARNING: inbound connections has expired (ORA-3136)
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_j003_15093.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lck0_16841.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_pmon_16519.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms3_16549.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:54:59 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_psp0_16523.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:00 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms5_16557.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:00 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms4_16553.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:01 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lmd0_16527.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:01 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms0_16537.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:01 2011
  Errors in the /opt/app/oracle/admin/xxxxx/bdump/xxxxx1_lms1_16541.trc file:
  ORA-00481: LMON process ended with the error
  Sun Dec 4 00:55:01 2011
  RECO: termination litigation because of the error 481
  Sun Dec 4 00:55:07 2011
  Instance terminated by RECO, pid = 16588
  Sun Dec 4 00:55:18 2011
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  Interface type 1 bge2 configured 10.0.2.0 from OCR to serve a cluster interconnect
  Type 1 202.76.5.0 configured OCR bge0 interface to be used as a public interface
  SNA system picked latch-free 3
  Autotune undo retention is enabled.
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  ksdpec: called to the event 13740 before initialization of the event group
  Commissioning ORACLE RDBMS Version: 10.2.0.4.0.
  Parameters of the system with default values:
  process = 300
  sessions = 500
  SGA_MAX_SIZE = 5368709120
  __shared_pool_size = 1879048192
  shared_pool_size = 1073741824
  __large_pool_size = 16777216
  LARGE_POOL_SIZE = 16777216
  __java_pool_size = 134217728
  JAVA_POOL_SIZE = 134217728
  __streams_pool_size = 0
  SHARED_POOL_RESERVED_SIZE = 142606336
  SPFile = +DATA/xxxxx/spfilexxxxx.ora
  SGA_TARGET = 5368709120
  control_files = +DATA/xxxxx/controlfile/current.258.702223445
  DB_BLOCK_SIZE = 8192
  __db_cache_size = 3288334336
  db_cache_size = 3221225472
  compatible = 10.2.0.1.0
  Log_archive_dest = + REDOARCH/xxxxx/archlog
  log_buffer = 30543360
  db_file_multiblock_read_count = 16
  cluster_database = TRUE
  cluster_database_instances = 2
  db_create_file_dest = + DATA
  db_create_online_log_dest_1 = + REDOARCH
  db_recovery_file_dest_size = 2147483648
  = 1 thread
  instance_number = 1
  UNDO_MANAGEMENT = AUTO
  undo_tablespace = UNDOTBS1
  UNDO_RETENTION = 14400
  Remote_login_passwordfile = EXCLUSIVE lock
  db_domain =
  dispatchers = (PROTOCOL = TCP) (SERVICE = xxxxxXDB)
  LOCAL_LISTENER = LISTENER_xxxxx1
  remote_listener = LISTENERS_xxxxx
  session_cached_cursors = 100
  JOB_QUEUE_PROCESSES = 10
  CURSOR_SHARING = SIMILAR
  background_dump_dest = / opt/app/oracle/admin/xxxxx/bdump
  user_dump_dest = / opt/app/oracle/admin/xxxxx/udump
  core_dump_dest = / opt/app/oracle/admin/xxxxx/cdump
  audit_file_dest = / opt/app/oracle/admin/xxxxx/adump
  db_name = xxxxx
  open_cursors = 500
  pga_aggregate_target = 1073741824
  Communication of cluster is configured to use the following interfaces for this instance
  10.0.2.235
  Sun Dec 4 00:55:25 2011
  cluster interconnect IPC version: Oracle UDP/IP (generic)
  CPI for the seller 1 proto 2
  PMON started with pid = 2, OS id = 19662
  DIAG started with pid = 3, OS id = 19664
  PSP0 started with pid = 4, OS id = 19666
  LMON started with pid = 5, OS id = 19668
  LMD0 started with pid = 6, OS id = 19670
  LMS0 started with pid = 7, OS id = 19672
  LMS1 started with pid = 8, OS id = 19676
  LMS2 started with pid = 9, OS id = 19688
  LMS3 started with pid = 10, OS id = 19692
  LMS4 started with pid = 11, OS id = 19696
  LMS5 started with pid = 12, OS id = 19700
  MA started with pid = 13, OS id = 19704
  DBW0 started with pid = 14, OS id = 19706
  DBW1 started with pid = 15, OS id = 19708
  DBW2 started with pid = 16, OS id = 19718
  LGWR started with pid = 17, OS id = 19720
  CKPT started with pid = 18, OS id = 19722
  SMON started with pid = 19, OS id = 19724
  RECCE has started with pid = 20, OS id = 19726
  CJQ0 started with pid = 21, OS id = 19728
  MMON started with pid = 22, OS id = 19730
  Sun Dec 4 00:55:28 2011
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  MMNL started with pid = 23, OS id = 19732
  Sun Dec 4 00:55:28 2011
  commissioning or shared server 1...
  Sun Dec 4 00:55:28 2011
  DISM started, OS id = 19746
  Sun Dec 4 00:55:52 2011
  LMON recorded with NM - 1 instance id (internal mem not 0)
  Sun Dec 4 00:55:53 2011
  Reconfiguration began (old Inc. 0, Inc. new, 78)
  List of nodes:
  0 1
  Global Resource Directory frozen
  allocate domain 0, invalid = TRUE
  Restored communication channels
  * field validates according to the instance 1 0
  * domain 0 valid = 1 according to instance 1
  Sun Dec 4 00:55:53 2011
  Diffuse master hash resource bitmaps
  Blocks of non-local process cleaned
  Sun Dec 4 00:55:53 2011
  Shadows GCS LMS 0 0: cancelled, 0 closed
  Sun Dec 4 00:55:53 2011
  Cancelled LMS shadows SCM 4: 0, 0 closed
  Sun Dec 4 00:55:53 2011
  Cancelled LMS shadows GCS 3: 0, 0 closed
  Sun Dec 4 00:55:53 2011
  Cancelled LMS shadows GCS 1: 0, 0 closed
  Sun Dec 4 00:55:53 2011
  Cancelled LMS shadows BSC 5: 0, 0 closed
  Sun Dec 4 00:55:53 2011
  Cancelled LMS shadows SCM 2: 0, 0 closed
  Set of master node info
  Subject to all requests for remote enqueue
  DWN-cvts replayed, questionable VALBLKs
  All enqueues grant awarded
  Sun Dec 4 00:55:53 2011
  LMS crossed shadows 5: 0, replayed 0 GCS
  Sun Dec 4 00:55:53 2011
  LMS crossed shadows 3: 0, replayed 0 GCS
  Sun Dec 4 00:55:53 2011
  Crossed shadows SCM 2: 0, replayed 0 LMS
  Sun Dec 4 00:55:53 2011
  LMS 0: 0 GCS shadows traveled 0 replayed
  Sun Dec 4 00:55:53 2011
  Crossed shadows SCM 4: 0, replayed 0 LMS
  Sun Dec 4 00:55:53 2011
  LMS crossed shadows 1: 0, replayed 0 GCS
  Sun Dec 4 00:55:53 2011
  Subject to all requests for remote-cache GCS
  Post SMON start 1 IR pass
  Fix write in SCM resources
  Reconfiguration complete
  LCK0 started with pid = 26, OS id = 19984
  Sun Dec 4 00:55:55 2011
  Oracle Data Guard is not available in this edition of Oracle.
  Sun Dec 4 00:55:55 2011
  ALTER DATABASE MOUNT
  Sun Dec 4 00:55:56 2011
  From FILIPE background process
  FILIPE started with pid = 28, OS id = 19995
  From RBAL background process
  RBAL started with pid = 29, OS id = 19999
  Sun Dec 4 00:55:59 2011
  SUCCESS: diskgroup DATA has been mounted
  Sun Dec 4 00:56:03 2011
  Assessment target incarnation to 7
  Sun Dec 4 00:56:04 2011
  Mount of redo thread 1, with mount id 3288132717
  Sun Dec 4 00:56:04 2011
  Database mounted in shared Mode (CLUSTER_DATABASE = TRUE)
  Completed: ALTER DATABASE MOUNT
  Sun Dec 4 00:56:05 2011
  ALTER DATABASE OPEN
  Selected broadcast the validation schema to generate notifications SNA
  Sun Dec 4 00:56:06 2011
  LGWR: FROM PROCESS ARCH
  Arc0 started with pid = 33, OS id = 20135
  Sun Dec 4 00:56:06 2011
  Arc0: Started archiving
  Arc1: Started archiving
  LGWR: FROM PROCESS ARCH COMPLETE
  Arc1 started with pid = 34, OS id = 20137
  Sun Dec 4 00:56:06 2011
  SUCCESS: diskgroup REDOARCH rose
  Thread 1 is open to the sequence of journal 23830
  Currently Journal # 3 seq # 23830 mem # 0: +REDOARCH/xxxxx/onlinelog/group_3.261.709928305
  Opening of redo thread 1
  Sun Dec 4 00:56:07 2011
  SMON: enabling cache recovery
  Sun Dec 4 00:56:07 2011
  Arc0: become the "no FAL' ARCH
  Arc0: become the "no SRL" ARCH
  Sun Dec 4 00:56:07 2011
  Arc1: Become the heartbeat ARCH
  Sun Dec 4 00:56:09 2011
  Successfully onlined Undo Tablespace 1.
  Sun Dec 4 00:56:09 2011
  SMON: enabling the recovery of tx
  Sun Dec 4 00:56:09 2011
  Database charset is UTF8
  off replication_dependency_tracking (no replication multimaster async found)
  From QMNC background process
  QMNC started with pid = 35, OS id = 20185
  Sun Dec 4 00:56:15 2011
  Errors in the /opt/app/oracle/admin/xxxxx/udump/xxxxx1_ora_20121.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-12663: Services required by the customer not available on the server
  ORA-36961: Oracle OLAP is not available.
  ORA-06512: at "SYS." OLAPIHISTORYRETENTION', line 1
  ORA-06512: at line 15 level
  Sun Dec 4 00:56:15 2011
  Completed: ALTER DATABASE OPEN

  Hi, Eric.

  Sory for these last response time.

  If you are looking for a special patch that is exists or not, you must run below

  ORACLE_HOME and ORACLE_SID and opatch as mention in my previous post, that it is the value

  lsinventory opatch | grep patch_no

  If she reports record than his average you past. If its does not provide that the problem is that you do not have this patch

  Respect of
  HELIOS

• How to make reference to what has been activated in a TileList using an ItemRenderer

  Hello

  I have a Tilelist component and I use an ItemRenderer, which is a button.

  I do not understand how to refer to what the user has clicked. So, if the first tile (which is the first Explorer) is checked, how can I know that that an individual has been clicked.

  < mx:TileList

      id ="myTL"

  dataProvider="{myAC}"

  Width="400"

  Height="400"

  ='2' columnCount

  number of lines='2' / >

  < mx:ArrayCollection id="myAC">

  < mx:Array >

      <mx:Object id="first" label="1" />

      < mx:Object label="2" / >

      < mx:Object label="3" / >

      < mx:Object label="4" / >

  < / mx:Array >

  < / mx:ArrayCollection >

  ItemRenderer:

  "" < mx:Button xmlns:mx = "http://www.adobe.com/2006/mxml"

  Click = "Alert.Show ("this was clicked') '> "

  < mx:Script >

  <! [CDATA]

  import mx.controls.Alert;

  ]]>

  < / mx:Script >

  < / mx:Button >

  Thank you.
  -Laxmidi

  Hi Laxmidi,

  Using the itemClick event you can do this by using the event object. See the code example below:

  <>

  xmlns:MX ="http://www.adobe.com/2006/mxml" > ".

  Import mx.events.ListEvent;

  Import mx.controls.List;

  Import mx.controls.Alert;

  Import mx.events.ItemClickEvent;

  private function onItemClick(event:ListEvent):void

  {

  var strAlert:String = "line of the Index Clicked element:" + event.rowIndex + "\n"; "."

  strAlert +=

  ' Column Index Clicked element: " + event.columnIndex + "\n";". "

  Alert.Show (strAlert);

  }

  ]]>

  Click = "http://www.adobe.com/2006/MXML Alert.show" ( 'It was clicked') ">"

  Import mx.controls.Alert;

  ]]>

  You can also try this by writing the Click event on the button in the TileList as itemRenderer where you can easily access the itemClicked data easily using the data object.

  Thank you

  Jean Claude

• currency of the row has been changed after cancel create and return to the call of workflow

  JDev 11... 2
  I have two workflow set up very similar to the task of Steve Muench and you will receive. I have master / detail in two tables on a navigation page and a different workflow that create/change for the master and detail (separately). When I create a new master, everything works well except that when I cancel and return to the appellant task, I get the "currency line has changed since the user interface has been made." The cancel task-flow-return has end transcation = rollback and restore savepoint = true and Cancel button immediately a = true. Looks like the controller looking for the newly created folder that has been rolledback. Given that this seems to be a model common vey, what is the best way to not show the warning?
  
  Thanks a lot for the pointers.

  Hello

  the usecase of yours is the standard demo I show for the workflow and I never had this problem. One reason might be that you keep the scope of the task flow DC to share instead of isolated, in which case restoring impact on the flow of both. If you want to keep shared DC then check that you return to method activity that is re - running the battery for the parent workflow

  Frank

• How to make a site that has been blocked?

  My nephew-in-law installed a malware product that has blocked my access to Cigna account. How to regain access to this particular account?

  These programs have a "bypass". Ask your son to this topic.

• Discover the 5.0 client notification that the session has been started on another machine.

  We run see 5.0 in all of our environment.   A user is notified whenever they have a pcoip session open on their computer laptop windows 7 and they initiate a connection to another device which pulls the session in the new deivce.   There is a message box that appears to inform them that it happened.

  Personally, I think this is a useful feature, but the user dislikes having to click OK on the message when they return to their laptop. Has anyone else seen elsewhere, or know how to disable this notification?   I'm not as an option of the client gpo or pcoip object in the adm templates.  It is a linked clone floating pool that allows only 1 session / user.

  This is a notification from dialog boxes connection of customer view rather than a toast notification. As you say, the general consensus is that this is a useful feature, without him, users have complained in the past that their office "simply disappeared". There is no way to disable the notification, you must make a feature request for this.

• Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

  How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

  you have an anti virus? try to turn it off.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• How to make sure that Adobe Reader has been properly patched?

  Before patching

  Adobe Reader version 9.3.0 installed via GPO worked without problem for months on Windows XP Pro SP3

  Connection method

  I copied the following files to the local C:\V932 folder:

  AdbeRdr930_en_US.msi (installation of MSI v9.3 original file)

  AdbeRdrUpd932_all_incr.msp (the downloaded file patch released in April 2010)

  Then I used the following command:

  msiexec /a AdbeRdr930_en_US.msi /p AdbeRdrUpd932_all_incr.msp

  The result

  -AdbeRdr930_en_US.msi file is updated to the date and time that the above command completed
  -4 new folders created (commune, CommonAppData, Program Files and Windows)

  Then, I created a new folder (\\servername\AdbeRdr932) on the server and copy all the contents of C:\V932 to this shared folder. After that, I created a new GPO package to upgrade the version 9.3.0

  Rebooted my Windows XP Pro machine and the upgrade went successfully. When I check help - about, it shows that I have 9.3.2

  Here's the problem:

  When I compare Adobe Connect files in the following folders, some files do not match:

  C:\Program 9.0\Reader of Adobe

  and

  \\servername\AdbeRdr932\Program Files\Adobe\Reader 9.0\Reader

  For example:

  Properties of AcroRd32.exe in the C drive shows the version of the file 9.3. 0.148

  Properties of AcroRd32.exe in the shared folder shows the version of the file 9.3. 2.163

  There are other files (DLL, EXE) that do not match. The files in drive C: is earlier than those on the shared network folder. Now I don't know what to trust, the version information illustrated with Adobe Reader - About or file version information.

  For those who deploy Adobe Reader version 9.3.2 via GPO, you see the same problem?

  As you say-

  When I check help - about, it shows that I have 9.3.2

  and

  Properties of AcroRd32.exe in lecteurC poster file version 9.3. 0.148

  These two statements tell the whole story.

  Try one thing - Go to help--> on... I know that you have done this, and on this screen, it shows 9.3.2... thats fine

  Now take the mouse to the position on the start screen where 9.3.2 is written and click

  After clicking, you will see a different version string. I bet that now you will see 9.3.0.148.

  This is what is happening behind the scenes:

  First version 9.3.2 is levied on a registry entry

  But when you click on the start screen, that version is levied on the AcroRd32.dll

  Unfortunately there is no right way to distinguish if the drive has been properly patched or not because sometimes version to the splashscreen is supposed to change after click on (if changes will only in the files other than AcroRd32.dll)

  In your case, the installation of the Reader 9.3.2 is corrupt because the way in which you create an agreement in principle is wrong.

  Follow these steps to create an AIP and deploy via GPO:

  Perform an administrative installation

  1 copy the installer msi Reader 9.3 to your machine.

  2. create a distribution point (a folder where the installer can install the non compressed

  program files).

  3. Click Start, click Run, and then type the following command:

  msiexec /a

  4. When you receive a prompt asking you where to install the files, look for the distribution point

  you created in step 2.

  5. click on OK. When the installer has finished, all files will be on the distribution point.

  Also AdbeRdr930_en_US.msi is also present on the distribution point. (This msi is used in step 7 below)

  To add patches to the administrative installation:

  6 copy the fix msp Reader 9.3.2 on your machine.

  7. click on start, then click Run and type CMD.

  At the command prompt, type the following:

  msiexec /a /p

  Once the installation is successful, you can copy this folder (distribution point) to any server and create the package of GPO.

  It is a two-step process.

  You have tried to do in one step! and that's where you were going wrong.

• How will I know if the history has been erased?

  Of course, if the whole story is off, you know. But because FF provides partial compensation, how do I know if this has been done? I know I need probably better parental controls in place; This is a problem. But still, I would like to know how do I know if the story is partially cleared.

  You can not. If you want to keep track of the Web sites that are visited, then you need to install a program like netnanny to control this traffic.

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• How to fix a download that is "a supported file type not or because the file has been damaged"

  I downloaded files from an e-mail to SAVE in the Documents and when I went to OPEN it with ADOBE READER, I received a message that "Adobe Reader cannot open this file because it is not a type of file supported or because the file has been damaged (e.g. He was sent as an attachment to e-mail and has not been correctly decoded.  I'm a novice at this and do not understand really that.  What can I do to fix this so I can play this file? Can you help me?

  Nope... I'm not confused.

  MP4 is a film format and has nothing to do with
  Adobe Reader.

  You need an application that can read a MP4 video file.

  The free VLC Media Player may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.1 - win32.exe)

  When you have installed... VLC right click of your MP4
  file and choose the menu... Play with VLC
  Media Player.

  Information on creating a file association...

  Right-click a file... in this case a MP4... and the
  menu... Choose... Properties / change button... Choose
  the program that you want to use (VLC Media Player) and
  Click on... OK / apply / OK.

  What does that make VLC Media Player default
  program for MP4 files.

  The next time you click left a MP4 file... VLC expected
  start and play the file.

  Let's recap...

  Since the MP4s are downloaded on the net...
  they are not attachments and my previous instructions
  on... File / save attachments... do not apply.

• How can I resolve this - AUTHORIZATION has BEEN REVOKED CS5 INSTALL doesn't WORK on Mac OS SIERRA SAYS the APP

  I had to reformat my Macbook air to update the operating system OS Sierra

  with everything deleted, I am trying to re-download my adobe photoshop cs5 extended... I downloaded successfully the dmg, but the guest of installation inside it will not work warning saying 'Install' cannot be opened. you must eject the disk image.

  then when I click on the? It is said

  authorization of the application has been revoked

  There may be a problem with this App. Although the application has been signed by an identified developer, revoked the certificate for the app and it cannot be opened.

  check with the Mac App Store or the developer of the software to see if there is an updated release of this app.

  so I talked to someone on the chat to adobe but they say they don't provide support for the current version products and told me to talk to Mac... Then I talked to Mac and they told me to ask if adobe has a compatible version for OS Sierra... went back to adobe they gave me icon apple steps - system preferences - security and privacy - blocking - click on download from anywhere - unlock - it did not work and they said the problem is that I use a beta version of the software (Sierra) that's why the error shows and that the solution should have said fixed operating system has not been started and is not tried and tested... I'm going to my version is not beta, because they have officially launched yesterday... and told me to ask adobe to publish an updated version that works on the Mac Sierra...

  of course, none of them have helped...

  Anyone have any ideas?

  I'm not good with computers, software and my head is about to pop, last resort's downgrade to the operating system that I used before... to run cs5 coz I need it... unless someone has a solution pls... Here's all the details... Sorry for the test

  Hi, I think I might have a solution, I'm busy now installing CS5 premium on a new installation of sierra, but will let you know if there are problems! I had the same problems as Britz00, very frustrating!

  After I had run the patch to allow 3rd party applications will be installed, (in a terminal such as suggested by K Perkins) instead of a double click on the installer in the terminal I dragged the exec 'install '. by opening a Terminal window and which seemed to work? (open the "Adobe CS5 Design premium Installer", then right click on the 'install' folder and click on "view the contents of the package in the menu drop-down down that pop-up, then double-click the"content"folder, then double-click the"MacOS"folder.") The exec 'Install '. file is the one that I dragged by opening a Terminal window) hope it makes sense. (Sorry, I'm terribly inept to explain technical things in computer)