How to make a USB stick into a bootable image

Similar Questions

• How to make a white sticker in Photos?

  How to make a white sticker in Photos?

  The strength of the tile has a negative value. Then the tile will turn into a White halo instead of a dark vignette.

  With an elasticity of-1,00:

  

• How to make a USB bootable windows 7 or windows xp or any other

  How to make a USB bootable windows 7 or windows xp or any other

  tajamulfayaz

  The link below is a tool that will use a Windows ISO file and make a USB bootable for you.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• How to make a USB recovery

  Hello

  I all ready have a 16 GB usb driver ready too go and I would also like to make a usb for my W700 acer recvery, how can I do to make this point, I can't get the cd has A I don't have a usb cable and B I don't have a USB drive, CD drive, so I would also do a recovery on my USB 16 GB USB

  Maximillian wrote:

  I'm fighting with an appearance of bricks, or DOA to-100.

  I'm trying to reload the system files,

  can access the Android system recovery utility.

  Can not find a way to select or implement recovery

  the menu selection?

  Any advice would be appreciated.

  M

  I would like to do your own Ant about it

• Portege 3480CT: how to make a USB bootable floppy drive?

  I need help to make a USB bootable floppy drive.
  My laptop 3480CT has not the traditional floppy drive instead, it uses a USB floppy drive and the bios has an option to boot from USB FDD.

  I would like to use a USB key to start (a Lexar Jumpdrive 32 MB 05dch 0080 h and GTX 1 GB 1516 h pid pid 8628 h), instead of the floppy. I want to load the boot XP on floppies, so I run recovery programs using chkdsk.

  I tried the usual suspects, the bootloader makebootfat and mkbt20 HP.
  I tried the demo version of the commercial product Flashboot.
  I photographed a floppy back 5.0 system on the USB key using the I-Setup demo.
  All failed including the specific option in the makebootfat images for FDD option and 3 different options of Flashboot.

  I ran
  http://Enos.itcollege.EE/~mkalme/Pahn/tut/tut.html

  Using Hexplorer ICY, I was able to confirm that the DOS5.0 on the boot sector pendrive is identical to the diskette.
  I could start in Dos5.0 from a floppy disk with drivers USB Panasonic and confirm that my Lexar was a system of 1.44 MB disk and command.com displayed in the directory. The GXT is not recognized by the Panasonic, nor BACK USB drivers to Duse 4.4 4.9. Another worrying indicator, it is my computer XP did not see all of the files on the pendrives, not command.com, or two hidden files (view all the hidden files option).

  I learned that Transcend a specific option that creates a bootable 1.44 mb floppy
  image on their USB key.

  Here is what I have gathered, corrections and suggestions are welcome.

  Interface USB the USB protocol specifications

  bInterfaceSubClass field specifies the Protocol
  01 order reduced block (RBC) a flash device
  UFI 04 a floppy drive floppy drive
  05 FDD SFF-8070i SFF-8070i command blocks however, funding may be in a different subclass for example RBC

  bInterfaceProtocol field specifies the transport protocol
  00 control/Bulk/Interrupt (CBI) with break of completion for FFD only
  01 CBI without interruption of completion for the FDD only
  transport in bulk only 50 h, including priming

  I don't know if the USB controller must imitate the FDD Protocol.

  Any ideas?

  Hello

  You cannot boot from the USB key.
  The BIOS of the laptop does not support something like that.
  Laptop factory supports and use different BIOS versions. As far as I know on this laptop Toshiba BIOS was installed.

  To my knowledge this BIOS does not support booting from the USB key, but only the HDD, ODD, LAN or USB - FDD.
  If you want to boot from USB FDD, you can create a bootable FDD floppy.
  Windows operating system creates the boot floppy drive when you right click on the connected floppy drive and select format. Then simply choose the option create MS-DOS startup disk start.

• How to format my USB after making it bootable with Windows 7 USB/DVD Download Tool

  I used the Windows 7 USB/DVD download tool to make my bootable usb key. But now I can't format it. When I open my computer and connect my USB it is shown as a cd. Also when I go into disk management it is shown that two disks hard each of them Go 99,76 and a CD-ROM that has 1123,13 GB RAW. I've tried a few programs for formatting, but they say that it is protected against copying. Is it possible that I can use as a normal USB again?
  Thank you very muck for your help.

  Hi mifocc,

  ·         What is the brand and model of the USB?

  Check if there is no slide switch on the side that provides protection against Scripture. This spectacle of a lock closed and open on each side.

  I suggest you follow these steps.

  (1) Insert the USB key into the USB port.

  2) click Start, type devmgmt.msc in the search text box and press ENTER.

  (3) find hard drives and expand it.

  (4) find the USB flash drive you want to format, and then double-click it. He opens the Properties dialog box.

  5) click on the policies tab.

  (6) the default option optimize for quick removal of the selected options, put it to optimize for performance, and then press OK.

  (7) now, open computer. Right click on the USB Flash drive and select format. The Format dialog box will now appear.

  (8) in the file system field, select NTFS.

  9) Press Start and wait while the process will be completed.

  You can also connect the USB on a different computer and try formatting.

• How can I make a USB stick can be used on Mac and PC

  I tried to format it in FAT32 and exFAT, but it does not work. I need to transfer files between a Windows 7 PC and my MacBook Air (El Capitan).

  Hi MSfromCA

  ExFAT is read/write compatible with PC and Mac.

• Satellite U940 - 12 c: how to make recovery USB pendrive having only 2 DVD

  Hello.

  I have a netbook Satellite U940 - 12 c, a software problem causing a HARD drive format and the SSD. Finally, I got the free Toshiba Recovery DVD (as it was not my fault, but a software one), two recovery DVDs.

  And that's all I've got: an own Satellite, without partition recovery or any data in HDD or SSD. and the recovery of two DVD. Since my laptop doesn't have a DVD player, and I don't have an external, my question is simple: How can I make a boot USB key recovery by using data stored in the recovery DVD?

  If anyone can help... Thank you!

  > How can I make a boot USB key recovery by using data stored in the recovery DVD?
  In my opinion this isn't possible.
  You cannot simply move the data from DVD 2 disks to USB. I think that this will not work.

  In your case, you will need to use an external USB CD/DVD drive in order to retrieve the laptop using both disks.

• How to make a USB-TC01 temperature data a global variable?

  Hi all!  I have a simple question (probably).  I bought the box USB-TC01 and with the software came a VI called LabVIEWTempLogger.  This VI reads a thermocouple voltage and internal conversions using DAQmx and a CYC edge to give a reading of simple temperature.  My problem is that I want to use this temperature in an another VI, then I want to make a global variable of temperature of LabVIEWTempLogger.  How to set a global variable such as temperature of LabVIEWTempLogger?  Thank you!

  You must get out of the recorder temperature VI the DAQ Assistant. Put it in a Subvi if you wish.

  Your main VI has some problems. The first fact a comparison is equal to the current temperature. Never make an equal comparison on a floating point number. Use in the range and force.

  The local 'Set Temp deg C' should be replaced by a wire from the Terminal. All local variables should be replaced by a wire. You can easily have the cable terminals from outside the main loop.

  Can't the difference in code in the States True and False when you read voltage.

  Don't use VISA bytes to the Serial Port. It's just bad style. You programmed it for a terminal character LF to get rid of fixed forward and set the number of bytes to read at a high number. Playback will wait until the stop character is detected and then automatically end.

  Finally, you have already created a world so I do not understand your questions about it.

• How to make a USB bootable rKill and manage to get a copy of a Windows Vista repair disc?

  I had a Trojan horse, don't know what kind of Trojan horse, but a Trojan none-the-less. Now I would like to repair vista, like you used to be able to repair XP with a disc. First of all, I would like to remove completely all the malware from my computer, BUT, I need rKill to kill all processes that can be associated viruses.

  So, nobody knows how to create a disk bootable rKill (that there not using Solution Explorer, the [portable] mouse pad)
  Also I need a copy of the ERD for vista please, don't know where to find one, but it would be nice to have one standby.
  Thank you.

  Hello

  the way XP to do a repair installation by booting from the disc does not apply to Vista

  a vista repair install is done from within a vista operating system

  and to do a repair installation, you must borrow a DVD of Vista to Microsoft, not an Acer, Dell, etc. recovery disk

  read the below tutorial on how to do a Vista repair install

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Here's how to do a startup repair disk; There is NOT a disk of resettlement:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for any question regarding rkill, post the link below because it is their product:

  http://www.bleepingcomputer.com/forums/topic308364.html

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Can I print by inserting a USB stick into the USB port of a printer?

  Hello

  I'm trying to use someones printer to print my work (I can't connect intot his computer). The printer includes a scanner and a copier and has a USB port on the front. My friend uses a similar printer to print and seems to be able to print documents that she recorded in PDF format by simply putting in his pen USB into the USB port on the front of the printer, options come for her to choose which document it wants to print and off she goes.

  When I put my USB, my USB content are not started, and I have therefore no options to print. The only option of PDF who came, had to print "USB Disk Pro User Manual". I pressed this option, and a manual began printing I cancelled. How is my friend to print when she inserts his USB pen, and I can't?

  Can anyone help with this?

  Thank you!

  The USB port on the printer is made to connect to a computer, not a USB flash key.  At least not usually.  Want to check your owner's manual to find out.

• How to use a USB stick for extra storage

  I try to add the storage to my macbook air 11 inches so I have a USB to sd card and I was wondering how to add this on my main hard drive storage.

  Thank you!

  TheTrueTechie,

  Did you plug in the USB cable to your laptop?

  (psssst: you may want to consider another forum ID/handle)

• How to format a USB stick 16g to NTFS

  I want to make a system image backup and tried to use a toshiba 16 gb usb2. flash drive. but it came that I could use it causes, it has not been formatted to NTFS. I can do this and how or what I need to use dvd discs.

  Hi SanjoGames,
   
  -What version of the operating system are you using?
   
  If you use the Windows 7 operating system, follow the suggestions given in this link for the backup files.
  Back up your files

• How to make a usb connection between 2 computers.

  I have a son with two heads identical usb in, and I want to make a connection between 2 computers.

  With just a single cable with standard USB plugs on each end, none.  Is not possible.