How to make folder Etester with Flash map
I film Flash that needs to be recorder on our web site. Is it possible to save a script when you click inside a Flash animation?have you checked with 'Windows event logger '?
Tags: Oracle Development
Similar Questions
-
In Windows Live Movie Maker, how to make a subtitle with the inner different font sizes?
How to make a subtitle with different font sizes, as in the old Windows Movie Maker?
I want to produce an effect video, like MTV clips that fade in and out for video (not before or after the video). It of about what I want to produce and could not because the new WLMM seems to have this deleted title feature.
My song (large)
Composer (small fonts)I want that this block of text fade in and out for my video. Is there a way to do this? Otherwise I would feel obliged to go back to the old WMM.
FWIW... going back to an older version of Movie Maker
Maybe the answer. You need to restart your
because the Live Movie Maker WLMP project project files
would be not compatible.No guarantee but the next for an installable download
version of Vista Movie Maker 6 may be worth a try* Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Windows Movie Maker Installer for Windows 7
http://noeld.com/programs.asp?cat=video#wmminstAlso, Movie Maker 2.6 will work on Windows 7:
Windows Movie Maker 2.6
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
(this is similar to the version of Win XP Movie Maker 2.1) -
How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.
Hi johanb64152807,
You can use eSign service, where you can send the document for signatures of several signatories, but the document will be sent to the following signatory after the earlier signed & it is not possible for him to make the changes.
Documents KB for help: -.
- Get started | Cloud of Document Adobe Tutorials
- Quick Installation Guide | Services Adobe eSign
- Send for electronic signature in eSign Adobe Document Cloud services | Adobe Acrobat DC tutorials
- Send agreements and collecting signatures. eSign services
- FREQUENTLY ASKED QUESTIONS | Services Adobe eSign
Kind regards
Nicos -
How to make a form with report and a form of inclusion in the same page?
Hey, guys:
I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
Thank you very much!
SamSo, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?
What is your version of the Apex?
I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.
Published by: jaouad khalifi on 13 December 2012 22:11
-
How to make a button to Flash a PagSeguro https page.
How to make a button to Flash a PagSeguro https page. Programming they offer is:
<! - FORMULARIO ALEXANDER PAGSEGURO INICIO - >
" < target form = 'pagseguro' action = ' https://pagseguro.uol.com.br/checkout/v2/cart.html?action=Add "method ="post"> "
<! - NAO EDITE OS COMANDOS DAS LINHAS ABAIXO - >
< input type = "hidden" name = "itemCode" value = "AC0DD53E5757C9F774629F9937513499" / >
" < input type ="image"src =" https://p.SIMG.uol.com.br/out/pagseguro/i/botoes/Pagamentos/120x53-comprar.gif "name ="submit"alt =" pay com PagSeguro - rapido e, grátis e seguro! » / >
< / make >
<! - FINAL FORM ALEXANDER PAGSEGURO - >
So I spent this programming in HTML start, I see the white border in my page.
I wrote a book and this schedule must send to a site secure for sale
I'm developing my site in Flash 4 and now nc6. Export to Html
www.escalasdecores.com.br
Use the urlloader class:
var urlLoader:URLLoader = new URLLoader();
var urlRequest:URLRequest = new URLRequest ("https://pagseguro.uol.com.br/checkout/v2/cart.html?action=add");
var urlVariables:URLVariables = new URLVariables();
urlVariables.itemCode = "AC0DD53E5757C9F774629F9937513499";
urlRequest.data = urlVariables;
urlRequest.method = URLRequestMethod.POST
urlLoader.dataFormat = pouvez;
urlLoader.load (urlRequest);
-
How to make a menu with images system
Hi, I would like to know how to make a menu in flash system. I would like to use the menu system to add a t-shirt on stage that I can drag, then the problem is that I can't work, how to use the clips that I have in the elements I've tried as buttons. Guess my main question would be can I I use the elements in a list of tile as buttons addChild on stage?
It makes no sense: maleDragDropPage.menuBar.maleTops.rowIndex (1) .addEventListener (ListEv ent. ITEM_CLICK, addTshirt1_M);
you check the property rowIndex of the listevent, just as I showed in my code. your listevent is in the addTshirt1_M listener function, and the listener must be added to the component tilelist, not items in the tilelist component:
function addTshirt1_M(event:MouseEvent):void
{
trace (Event.RowIndex, Event.ColumnIndex);
you will use these two values to determine which object to add to the screen.
}
-
How to make an ISO file Flash Player, instead of burning a DVD?
I know how to make a DVD ISO file, install windows 10 preview, using Imgburn.
But, how do an ISO file flash drive to install Windows 10 preview? How IMgburn can work for that? ImgBurn just do the conversion and then simply write to the flash drive.
I can't believe you can "burn" a flash drive. (Someone correct me on this)
danoVista
Hi DanoVista,
Thanks for posting the request in Microsoft Community Forums.
With the ISO downloaded completely, simply transfer it to a USB flash drive. To burn an ISO to a USB stick, download Windows 7 USB/DVD tool is probably still your best bet.
If you encounter a problem during the creation of bootable flash drive, you can use your favorite search engine for any utility that allows to format and create bootable USB flash drives.
DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information helps. Response with status so that we can help you.
-
How to make a link in flash to HTML
We have a site entirely in flash. Link us to another page with the same navigation and but HTML instead. I now have what it takes to make the HTML Navigation work and bring me not only for the file index.html with embedded flash, but more deeply in the flash part. I know, this is done via getParameters in the URL.
How to read the getParameters in Flash with an onLoad tasks?Ive just took a look and found this:
May or may not be what you're looking for.
I hope it helps anyway.
Dazfaz
-
How to make a ringtone with Itunes 12.4.2.4?
I'm new with Iphone... I now have a 5 s.
I have itunes 12.4.2.4
How can I make a ringtone with a real song?
Thank you
go to AppleSupport
-
How to make a macro with a goal photos 50 mm f1.8 Prime
How to make a photos of macro with a prime lens 50 mm f1.8 lens is labeled macro, but only makes farm ups.
A "true" macro lens allows to approach quite close to your subject that the size of the image on your sensor is larger than what is in real life.
For example: your sensor is "roughly" 14 x 21 mm. A penny in the United States has a diameter of 19mm. This means with a real purpose of macro scale '1:1 ', you could get close enough to the penny the edges of upper and lower of the penny does not fit in the frame (the will of sides... barely.)
There are a number of ways of "close-up" photography.
(1) buy a "real" macro lens The EF-S 60mm f/2.8 Macro USM lens is fantastic and also good enough prices. A 'real' macro lens will provide the highest quality of image.
(2) buy "extension tubes". These committed between the casing and the lens, but they are hollow (there is no element of glass in them but they have electronic contacts so that the lens and the body can still communicate.) By moving the furthest lens to the focal plane, the range of the lens is considerably reduced. This allows you to get much closer that otherwise would be possibe.
(3) use diopters "close up". Here's the screw on filters that you screw on the end of your lens. They provide a larger/more close to your subject. The disadvantage of these, it is that they can show distortion near the edges of the image.
(4) use a ring of "Recoil". It is a ring that allows you to mount your lens on the camera body... back. The screws on the front of the lens (where you would normally be screw on filters), but a bayonet mount on the other side, so you can connect it to the camera. Using the lens 'backwards', you can get much clsoer. The downside is that you can't control the lens. Development is manual and you cannot change the opening.
-
Laptop Compaq Presario CQ60-300SO - how to make HDMI work with Win 7
I've upgraded to Windows 7 from XP.
I connect the HDMI cable to my TV.
The PC displays both screens, but there is no signals reaching the TV.
I uninstalled the software of the graphics card and let the Win Update to find the driver. Same results.Here's my setup.
How to make it work? It works very well with a VGA cable. And I tried many televisions.
Martin
_________________________________________________________________
Name of the operating system Microsoft Windows 7 Enterprise
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
Name of the MARTSHP system
System manufacturer Hewlett-Packard
System model Compaq Presario CQ60 Notebook PC
System Type X 86-based PC
Processor AMD Sempron (TM) TR-42, 2100 Mhz, 1 Lossnay, 1 logical processors
BIOS Version/Date Hewlett-Packard F.54, 18.08.2009
SMBIOS Version 2.4
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
MartsHP\Administrator user name
Zone schedule Southeast Asia standard time
Physical memory (RAM) 4.00 GB
Total physical memory 2.75 GB
1.60 GB available physical memory
5.50 GB total virtual memory
4.13 GB available virtual memoryHi realpommy. If you encounter problems with HDMI output and let Windows determine the pilots, who could be part of the issue. First of all try to install these Windows 7 drivers provided by HP for your laptop: NVIDIA nForce Chipset MCP77MV graphics drivers
After installation and reboot, if you still have problems with video output look in Device Manager, to ensure that there is no error, or "unknown devices". The section "Understanding of the symbols of error Device Manager" in this document:
Information from the Device Manager in Windows 7 to illustrate some possible errors.If there is no error in Device Manager, do through these documents for more information and the last for troubleshooting ideas:
Connection of a monitor, projector or a TV (Windows 7)
Overview of HDMI and DVI for PC connectionsHDMI display resolution and problems of his (Windows 7 and Vista)
Let me know if it helps.
-
How to make a Christmas with pictures newsletter
How to make a newsletter of Christmas with images all around. I want to organize the photos. the collage does but I want to place them.
Click file > Open and select all your pictures
Who will add them to the project location
Then select file > New > empty file
Select the color white (or whatever you prefer) and add your width and height of your final image (setting resolution 72 for the use of web or 240 to 300 for printing), and then click OK
In the project bin, click your first picture and drag it to the top in the main window on top of your new background.
Click on the move tool and click the center of the photo and drag to arrange where you want on the background - you can hold down shift to maintain the original proportions while dragging the handles of corner of the bounding box for the size you want.
Do the same with the next photo (drag it to the top in the main window) and use the move tool to position it. Then continue with each image.
Finally click on layer > flatten image and save it in jpeg format. (Save as PSD if you want to keep the layers to change again)
Note: when you add pictures that they removed in the Center. If you use the move tool to drag the apart. Click in the middle of one and move around and then the other until you get them positioned as desired.
When you click again with the tool move a selection border appears around the image and you can drag the corner handles to resize your photos. Hold down the SHIFT key when you drag the angle handle, and which retains the proportions of the original.
Finally click on layer > Flatten Image and save your collage - you may then want to use the crop tool to cut any excess white canvas and then save.
-
What happened to Adobe Encore? How to make a DVD with an interface now in CC?
I finished editing PR now I need to make a DVD with menu and chapters. I used to use Adobe Encore for that but do not see it in the list of CC app. Where can I find or what app should I use to make a DVD?
Install the CS6 first to get even. Screendump read 6.0 instead of 2014.
Export a dvd mpeg2 predefined in the creation and import the file in again.
Do menu and burn.
-
How to make a shadow with a picture of table top
I have to photograph jewelry and must make a shadow with the objects that I shoot. They are a ring and a bracelet.
Can you offer and the 'easy' way to do this please. Thank you very much, Penni
The simplest is to photograph the jewelry with a directional light that will cast a shadow. Photographing jewelry on a white background.
Then this in Photoshop.
(1) duplicate the image layer.(2) mask the jewels on the top layer.
(3) Desaturate the layer below.
(4) levels of use on the layer shadow to add contrast, making all white white background without blowing in the shade.
Is attached a screenshot of a product shot with shadow created as described above.
-
How to make a calendar with Muse
How to make a calendar in Muse that my client can update manually? For a booking of apartment site.
I've only seen them on http://www.muse-themes.com/ in the bar just type CALENDAR search, you will see a number of calendars of third parties to use for your clients site. Do not forget to rate me
Maybe you are looking for
-
HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated
Computer model: HP Envy Phoenix h9 - 1420t OS: Win 8.1 Pro 64-bit HP Support Assistant Version: 8.3.27.17 Framework: 12.5.26.37 Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has succes
-
Re: Need driver for Satellite P100-346 card reader / PSPAAE / Windows Vista
Could you please help me and post a link where I can download a driver for the Satellite P100-346 card reader / PSPAAE / Windows Vista 32 bit?THX!
-
Combining the CD titles in a piece of music
I have several classic CD that I need to load into iTunes. Some parts have several movements. How can I join the movements in one singl; e concerto or Symphony?
-
How to activate the Intel GPU of 4000 on Satellite L850-10J
Hello I would like to know how to activate my graphic card intel 4000.On the Device Manager in the graphics card menu I can not see the 4000 graphics card intel, shows me only HD 7670 M Ati graphic card. I did an update of my bios version 1.60.What i
-
Hi all I developed a Labview VI, but now I need the VI to activate an add-in, excel at some point. The add-in allows to launch a measure with which I was not able to control through labview (light meter SEKONIC C-7000) and the measure should start at