How to make images 100% of page width?
I've been familiar with the functionality of page width to 100% for some time and have used a little without any problem so far. I try to make this image of the banner I have 100% the width of the page (which doesn't seem to be an option), but when I do it still leaves little space on each side of the image when I preview the it. The next thing I tried was to use a larger version of the image in this way, it stretches over wide as the browser, but the problem there is that it allows a horizontal scrolling which I don't want any.
This site has many images of banner/rectangle similar to what I design so it's the effect I'll do. Any suggestions would be great guys
make a text box or a rectangle of width 100% and then fill the object with the image. to scale to fill.
Tags: Adobe Muse
Similar Questions
-
When you open a new tab, how to make images of recently viewed pages underneath the toolbars?
See what-
http://www.Google.com/support/toolbar/bin/answer.py?answer=115561 -
When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?
Here is some additional information on the configuration of the new tab page:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered
(3) double-click the preference browser.newtab.url and enter your favorite page:
- (Default) page thumbnails = > subject: newtab
- Blank tab = > subject: empty
- Built-in Firefox homepage = > topic: welcome
- Any other page = > full URL of the page
Press Ctrl + t to open a new tab and check that it worked. Fixed?
Some traps:
If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.
Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:
"3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions
If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.
A little luck?
-
How to make a very short page any longer the footer appears so under screen
I am new to Dreamweaver and having a problem to find how to make a page (contact) very short longer so that the footer appears below the screen. Currently the footer shows Mid-screen because the page is so short. Thank you!
Since you haven't posted any code, I guess that you have a CSS rule in your style sheet main governing the footer.
You cannot add a margin-top to this rule because it would affect the footers on ALL your pages.
I suggested a styleblock only on the contact page which would negate the main style sheet on the contact page
This would be the
section of the contact page. -
How to make a website simple page that scrolls like this muse adobe site?
Hi, I'm working on this site: http://johanspeaks.BusinessCatalyst.com/index.html
I would like a function navigation bar and scroll the single page like this site: http://asiercarazo.com/
I can't know if this is the same page different pages and subpages and if it's the same page how to make the menu bar to function like that.
Thanks for the tips!
Her fair anchors - http://tv.adobe.com/watch/muse-feature-tour/muse-create-anchor-links/
The navigation bar is pinned to the left - http://tv.adobe.com/watch/muse-feature-tour/muse-pin-objects-to-the-browser-window/
Thank you
Vinayak
-
Separated from 100 GB in 2x50GB - how to make a 100 GB HARD drive?
Yesterday, I bought my Toshiba Satellite A100-225. This laptop has a 100 GB hard drive. But when I go to "EC/workstation" I see two hard drives. The C: and D: hard drive are two 50 GB. But I wish I had just a 100 GB. I heard a little more on the partitions.
My hard drive can be partitioned? How can I make a hard drive 100 GB of it? East - advised to do? I hope someone could help me more.
As far as I know all the new Toshiba laptops come with partitioned HARD drive. In my opinion, you should leave it and use the second partition (D) for the backup of data. In the case that the operating system is blocking you can remove just partition C and use it to new installation.
Expert mode on recovery DVDs installation allows you to install Recovery on defined partition image. If you have only one partition and that something is wrong that all content will be lost.
The 100 GB is enough space and it can also be split on three partitions where the first (C) will be used for the OS and installing different applications and two others just for the data backup.
I put t know how you want to organize, but you can do what you want. A very useful tool for HARD drive partitioning is Partition Magic.
-
How can I add 100 blank pages to a PDF doc?
I need to duplicate 1 page 100 times in a PDF document for printing. How can I quickly and easily make?
Thank you!
D
Open the thumbnails pane. Click the thumbnail you want to duplicate, and then by holding down the Alt/Option key, drag it to the right. I have few smaller signs and a large blue bar will appear when you drag.
Who's going to duplicate page. Now, select both pages that are the same and copy again. Do that enough times until you have 100 pages added that you need.
You can also use this same concept to move and replace pages: Document Geek: how to replace Pages in a PDF using the Acrobat Pages panel
-
How to make a blind accessible page
Hey there ' All, I run a website for a manufacturer of toy Norev ( Liberty Promotions - see here ) car, the way the page is designed primarily uses pictures, cars, and descriptions (we do this, then we can control the police, Pirates 2, we use available online pirate font, so the 'look' is the same) and just about everything else. Yes I know its a lot of images, his heavy on download time and it's a pain to change. But my boss like it like that, and if that's the way, at least for now, he'll stay. We did not have a lot of complaints about this so far, and this threw me for a loop for:
One of our customers won a contest that we organize for possible suggestions to make in our Norev cars, this customer's suggestion was taken like that time winner and we start to produce cars. On the site when someone wins, we post a picture and a logbook on these and there collection. While talking to this guy telling him what I need, he infomed me that his is blind, but still collects our products (fine a type 'seeing is believing' product') I was flabergasted, and then he said that he had a comment, that (go figure), our site is completely image based translates well on his page reader (windows-eyes) , So I talked to him a little more and decided that especially for the car he "visualized" I would make an effort to make very friendly Windows-Eyes, so that he could get the full description of the bus, calendar, etc. by using its drive and not to someone else to read it to him. Of course, I would like to start this building in all of my future pages, just to make it easier for him and everyone else in the same situation. But I don't know where to start. Can someone give me some good suggestions on how to do it? Can I use a < div class "" visibility: hidden; "> to hide the same text on the chart (c. - d.-take the description in PS and paste text in DW) and then to have it be hidden from all the readers of Visual or should I do something else?" Please help, I know, I would be happy, and so would he.
Thank you> I understand not putting text instead of images, I'm working on a redesign for
> this question, but unfortunantly the design problem is the man who cut the
> check,
> He likes having a 'pirate police' to describe a pirate bus and a 'halloween '.
' > fonts "to describe a bus of halloween.Thinker very deeply, huh? (o).
in any case, I guess that you are in a bind. Or please your whims of bosses, or
make the site accessible.> Arise
> the text that is in the graphic would alter my visually impaired visitorsalt attributes are not supposed to "pop-up". This is a bug in IE. Use an empty
TITLE attribute to get around that.That said, the alt attributes are not designed to replace the paragraphs of text.
They are intended to be short replacements for images. So, they are useful for a
Headline, but not really an article.> Your suggestions, once again in this case only - make a page that has been
> much
> more text based - damned appearance and give the link as a click
> here
> for blind accessible page?You could, but then you are now on two separate pages. Which only adds to
your work.Best solution:
Install the fonts on your computer of bosses. Put all the text on your site as
text, declaring the police pirate as first choice. In this way, your boss
see his pirate police and nobody else is burdened by it.-Darrel
-
How to make images orginated table ranked clickable report?
How do table came from the clickable images to the rank of report?
Do the small example application with page 4 click img which is IR report showing pictures of the table test_images and v1_test_images.
The v1_test_images is just seen on test_images that is necessary to seduce the 'blob format' to extract images from the same table on the same report.
Now, I would like to be able to click on the 'images' in the report and may for example branch to another page etc...
I know that on the line, there may be a clickable image from the shared components of work/application space images and the image name can be changed with sql.
But I would like to have multiple images on the same line and those who were taken from the table, as in the sample application.
workspace: imagetest_ws
application: 13418
page in question: https://apex.oracle.com/pls/apex/f?p=13418:4
user of the developer: guru
pass: meditation
rgrds Paavo
Doesn't seem to be possible to combine the BLOB format masks declarative with standard column links (it looks like a bug). What you can do is to use the
apex_util.get_blob_file_src
API method to get the URL of the image in the report query:... , apex_util.get_blob_file_src( 'P3_CONTENT' , case when e.sal > 2500 then 21 else 41 end) img1 ...
and create the link to the image in the HTML column report Expression attribute:
-
How to make images to reproduce in Lightroom before opening in Photoshop?
Until I upgraded to CC, I had an older version of Ps with the raw camera not updated version. Whenever I wanted to change the selection of images from Lightroom in Photoshop, I got a pop-up saying that the camera raw is old and if I wanted to go to Lr instead. I chose 'Yes' and "Do not ask again".
It was convenient for me for the time it took to render for Lr, I could always use my computer do something else. And, as banal as it sound, when I'm done editing in Ps and come back to Lr, I find all my loans modified photos selected for my next step. I know it's trivial as it only saves me clicking on Cmd, but each click counts for me when I do that all day long.
So how do we restore in Lightroom before you open it in Photoshop once more images?
If levels of ACR, in Lightroom and Photoshop plug-ins, ACR match, then Lightroom design to pass relevant metadata to the PS, it uses then is ACR plugin 'silently' make the Tiff/PSD. And I don't think you can change this behavior, set apart by deliberately creating a shift of ACR levels (the PS/ACR plugin that needs to be less of Lightroom). At the moment you can't easily do that, but by releasing LRCC/6.1, there will be no doubt a corresponding update of PS ACR plugin. At this point, if you do not have this update of the PS, then you will offset the cab, giving you the opportunity to have LR what the file again.
-
How to make the customer activate page 2
Hello
I'm not sure how to explain my problem, but I'll try.
I want to make it possible for the customer to add a new section to the form. Lets say that the customer first enters the main information of the form related to a case. Then, the customer should be able to add "persons associated with this case." I think that by clicking on a button and a new page occurs where the customer can then enter data on people related to the case.
That means on I want to put a button on page 1 and when you click page 2 become active. If the button is clicked the form from the point of view of the customer will not consist only of a single page.
I hope that made any sense at all. If this isn't the case, I'll try to explain once more. But I hope someone can help.
Kirstine
Create the form as a form of page 2, page 2 to the hidden value and then place a button on the first page that affects to visible when you click on page 2. You can put this script in the click event of the button:
Form1.Page2.presence = "visible";
When page2 is the name of the second page of your form, and form1 is the name of your form. Be sure to set the button to javascript scripting language.
-
How to make images appear in the order?
Hi, I have three images that I want to appear in the order 1, 2, 3, with a second or so in between - when 'this' is clicked. Any idea on how to do this?
Here is the page:
http://gsconsultants.NET/training/strong/modules/Module1/Module1.html
Scroll to the 1-2-3 images
Thank you!
Hanna in Tahoe
With Flash or Gif animated.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB
www.Alt-Web.blogspot.com -
KODAK ALL IN ONE PRINTER ESP OFFICE 2150 PRINT SCALE IS LOCATED ON 26%... HOW CAN I CHANGE IT TO 100%
Hi Clarence,.
Please go to the Microsoft Community Forums.I understand from the description of the issue you want to change the print from 26% to 100% scale.Are you facing this problem of setting of scale impression on any particular program/document?Check out the link:Choose printing optionsI hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further. -
How to make images of downloading a CF card
How can I download images from a cf card
Haver you a card reader?
Do you have USB3 ports?
You have several options
You can import the bridge. File > get Photos from camera opens this dialog box, but the unit must be connected and a driver for the webcam is installed.
Or you can remove the camera's CF card > put it in a card reader and plug it into a USB port.
That's how I do and bring them through computers files Explorer
USB3 card readings are faster than USB2 journe, then use USB3 if you have an outlet.
Some card readers are much faster than others. Names like Lexar and Sandisk are a safe bet if
-
Just like the title says, I have a little problem with Adobe draw. I put a picture as a background, designed something on it, deleted the photo behind and when I send the drawing to myself as an image is too small. I have no idea how to change or enlarge the image. Help?
HI Marco,.
I just spoke to the engineer on this yesterday (sorry, I wanted to write). We were unable to reproduce the problem, and looking at the code, there is no reason for this. I'm sorry.
I don't know if this will help, but if you want, I can get you on the list of our tester for you the most recent draft of the app. If you want to try this, write to me (thanks to feedback in-app; tap the icon of the draw, then give us your comments) with the email address you would like that I use for Apple TestFlight.
Sue.
Maybe you are looking for
-
When I click on a shortcut on my desktop when the page opens all the toolbars and the address bar disappeared. The page appears at the top of the Web page. This does not happen when I open Internet Explorer. In fact the top of this page is at the top
-
The signal strength of the WIFI connection
Is it possible to have a tool or something to see how good my connection between my TECRA S1 and my router is?
-
Why NEITHER-ICU does not require licensing OR?
Hello I'm running into some problems of deployment of a CVI application that uses OR-ICU libraries. The application works well on my development computer. I create an installer that includes the runtime of CVI and NOR-USI 1.9.0 and install my appli
-
I just bought a Pavilion G7-2220us and they told me he had two slots for memory. I told them I wanted to move to 8 GB, and it already had 4GB in there. So they sold me another chip of 4GB. This system has actually two locations inside? I took a gl
-
Unable to connect to direct e-mail, password reset does not work
says invalid password, but can't reset