How to make my own yousendit

Similar Questions

• How to make your own custom methods in AS3?

  I was wondering if I could make my own method for the form.
  I wrote a little function to draw a line with a square brush from one point to another point.
  
  Now at the moment it's just a function as follows
  function drawSquareLine (shpe:Shape, x 1, y1, x 2, y2, brushWidth, color) {}
  with (SHPE)
  {
  graphics.beginFill(0xFF0000,1);
  graphics.lineStyle(.25,0x000000,0);
  graphics.moveTo(x1,y1);
  graphics.lineTo(x2,y2);
  }
  }
  
  However, I thought it would be cool if I could do as a custom method (is that the right terminology?)
  So, instead of providing the form as a parameter of the function could... do call that?
  
  shpe.drawSquareLine(x1,y1,x2,y2,brushWidth,color);
  
  And if so could I have an example on how I could do this?
  
  Bravo guys.
  

  Excellent.
  you explained that perfectly (and it still took me 40 minutes to understand).

  So I in the outer class .as file
  package {}
  import flash.display.Shape;

  public class lineTool extends shape
  {
  public void drawSquareLine(x1:int,y1:int,x2:int,y2:int,color:uint,brushSize:int)
  {
  var bsH:Number = brushSize/2;
  graphics.beginFill (color, 1);
  graphics.moveTo (x 1, y1 - bsH - bsH);
  graphics.lineTo (x 1, y1 + bsH - bsH);
  many lineTo etc.
  graphics.endFill ();
  }
  }
  }

  and in part 1 of my movie, I

  var shpe:lineTool = new lineTool();
  shpe.drawSquareLine (20,20,100,100,0xFFDDBB,10);
  addChild (shpe);

  Thanks for the second help :)

• How to make your own Board BNC connector for 37 pins PCI-6010?

  This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

  I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).
  
  
  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".
  
  
  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.
  
  
  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

  It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)
  
  
  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)
  
  
  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

  But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

  Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.
  
  
  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)
  
  
  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).
  
  
  • Ten for PFI/digital lines. Outers will connect to GND D.

  Up to a maximum of 29. You want maybe less, depending on your application.

• "How to make our own widgets as ' Compositions > vacuum '?

  Can someone share something that can help me build widgets like ' Compositions > vacuum, new Star '?

  I have already crossed through MuCow Documentation, but still according to me, there are a lot of limitations that do not allow me to widgets as Compositions.

  Widgets from Mucow and widgets incorporated - it is not the same thing. There is no way to build it using mucow. You can build only if you are in a part of the team's Muse

• Without a password how can I access the computer and make my own?

  I inherited a Mac Mini (2012, but do not have the password to the owner (departed).) How can I access and make my own?

  Follow the steps here:

  What to do before you sell or give away your Mac - Apple Support

  To restore to a factory State, set up like yours.

• How can I make my own fonts?

  Hi, I have a few questions, I hope that some of you might be able to answer

  1. How can I make my own web fonts?

  2. they will be safe to use?

  3. people will be able to see them in their browsers?

  What I want to do is the fonts that resemble objects such as a television, baseball or a microphone.

  Does anyone have experience in this sort of thing?

  Web fonts is a specialized skill. I doubt if any of the regular contributors on this forum has experience in creating fonts. They will be safe to use? Depends on how they are made. People will be able to see them in their browsers? No, except if you embed fonts in your CSS, and to provide the policies of source on your web server for the browser to download.

  If you want to make the text look like objects, you would be better to attempt to use the SVG (scalable vector graphics) format. SVG is now supported by all browsers, except a few very old. It has the advantage of supporting the text and graphics, and the file sizes are normally minimal. Try to search the Web for "style text with SVG."

• screen scrolls top down on its own how to make this stop

  my screen jumps up and down how to make this stop?

  Hi ssuueet,

  1. Have you tried the steps suggested?
  2. Have you managed to solve the problem?

  If this isn't the case, reply to the thread, then we can look for other options.

  Thank you!

• How can I make my own theme for windows7?

  Original title: making graphs of the custom taskbar

  Hello

  Im trying to make my own theme for windows (not through customization, mainly through the registry and other) and I want to replace the standard taskbar with a repeating pattern.  There is a way to customize it, so that other things like the bar title and other graphics of standard system, it would be greatly appreciared.  Thank you in advance,
  Nicholas

  Hello

   

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Forums. I would recommend so post your query in the MSDN Forums. You can follow the link to your question:

  Development of UIs for Windows Desktop:

  http://social.msdn.Microsoft.com/forums/en-us/windowsuidevelopment/threads

  Kind regards.

   

• How to make links in Pages are displayed in blue

  How to make links in the Pages appear in blue?

  Select the first instance of the text with a hyperlink. Then Format menu: fonts: display fonts. On police Panel, there is a button for the underline. At the bottom of this associated menu is a color menu item. Click on that and a color picker appears. Find the shade of blue that you want for your link, and when you do, your selected hyperlink will change a black! highlight your blue color.

  Don't deselect this hyperlink which now has blue underscore. You will notice that the character Styles shows Link (black) in the selector. Click on and then click on the "BOLD" symbol to add a new style for your hyperlink Blue + Blue. You can be creative and just call it a blue link. This new character style is only valid in your current document. In the Format menu, select the Style of copy, and then select each black underlined hyperlink, you can select menu Format: Style block to date each other.

  Not yet done. If you want a permanent blue hyperlink in the v5.6.2, Pages then you will need to get it into a model for re-use. I suggest that you create a document by using the empty template, add your desired character, paragraphs and list styles and then save it under your own custom template empty.

• I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used windows 7 ultimate to run again how to make Home Premium return on it

  I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used Windows 7 ultimate get back to work how to make Home Premium back on that I do not have the disk backup I lost it

  Hello

  • What were the changes made before the problem occurred?
  • What happens when you start you computer?
  • Are you able to boot to the desktop?
  • You receive an error message?
  • If your friend has installed Windows 7 ultimate or just fixed the crash problem - was - it own installation\custom?
  • What version of Windows are you using?
  • When you say "windows home premium" are you referring to Windows Vista or Windows 7?

  If you are able to boot to the desktop, you can check the version of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  Response with more information.
  See also:
  http://support.Microsoft.com/kb/555375

• How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send

  How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send.

  Hi kristieann,

  ·         What version of the operating system is installed on the computer?

  You can search for any third-party application, using your favorite search engine to split the recording file.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• How to make a restart of disk with the files and data, that is to say, to the profession of XP

  I looked at my hard drive and have little or nothing left to free space, and I d ' attribute of * on my pc, I have removed more than half of it I do not either, but the hard drive still does not seem to move with more free space. so I was wondering if someone can tell me how to make a backup of drive for windows and programs, but not all the other files that I have on my hard drive, I would put the disc that came with the pc, but I left it out and the dog he finished, numbers and all, I can reinstall everything I need later ,,

  It is not a method of "reset" of windows, se...

  also, there are 'boot' cd that can be made, but they cannot be used to start windows.

  what they do is to start the computer with their own proprietary software, being generally utility to repair the file system.

  Subsequently, it is the hope that xp can then start by itself.

  don't know exactly what your situation is.   However, it seems that it would be a good idea to mount this hard drive as a slave / secondary drive on a working computer.   all computers can have at least 2 hard drives installed at the same time.

  in any case, if this drive can be enslaved on a working computer, you can use this computer to reconcile the master file table, i.e. to check the disk, then it - defrag since you had deleted half of the records of the file system.

  by the way, if your pc is not stable, how would you be able to make a bootable cd?

• How to make a backup of the system files?

  I want to just back up the filesystem in the case where.

  Hello

  You can save your own personal files (documents, photos, etc.) or do a complete PC backup that contains the system files.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  ___________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery discs that are system files in order to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• How to make a windows vista recovery partition

  Hi I have a windows vista desktop computer and I need to do a recovery partition. There is currently no a. How can I make one? My computer has slowed down at the stop and I need recovered

  Hello

  You can't do a recovery Partition.

  A recovery partition is copied onto your hard drive from the computer manufacturer at their factory.

  If you do not have to purchase recovery disc are to make sure that you do not have alreasdy have a recovery hard disk Partition?

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.