How to make text centered in a table cell?

Similar Questions

• How to make text tabled clothes out / disabled

  Hello
  
  I have a text field and I put the following property...
  

  HTML Form Element Attributes:- readOnly=true

  This field is read-only now.
  
  HOW to make this field looks like a field of disabled, something like filling in the background with the color gray.
  
  
  Thank you
  Deepak

  Hi Deepak,

  You can always add the width in the style:

  style="background-color:#E4E4E4; border:1px inset #F0F0F0; padding:2px; width:100px; display:block;"
  

  Andy

• How to make text read-only once it is recorded and distributed on the ground?

  How to make a read-only text field after it is registered adistributed d?

  LiveCycle Designer ARE 8.2

  Exit this JavaScript code on the event:

  textField1.access = "readOnly";

  This works after the user loses the focus on the field, but after it is saved and distributed, this field is no longer "read only".

  I need to have staff insert information into a text field and try it then distribute to clients, and these fields must be protected.

  How do you do that?

  No... .it has to be there to be a schema valid... but it is not used by the product offline.

  Paul

• How to make text appear n disappear?

  When an event is true, a text appears on the front panel. If set to false, the text disappears.

  I know that we can use a property node for other things like the LED, but I have no idea how do for text.

  Pls help.

  p/s - say nothing pop ups

  TQ

  Hi fmpfmpf,

  You can use an indicator of the chain. Place outside your case our structure to specify a different value for your different instances of the event.

  Mike

• Copy the text in Framemaker 10 table cells

  I want to copy the contents of multiple cells in a table to another table in the same document. How can I do this so that the text is copied in several cells again and not all content in a single cell?

  Margot

  Normally, make sure that you select the same array of cells in the source table and destination. If they don't match, geometrically, it may not work. This might happen, for example, if you have an overlap in one but not the other.

  If the arrays must have the same content for certain cells, in the future, consider having the cells from the clone table fill cells shared with cross-references in paragraph text, the main table. Then the main table changes, made the clone.

• How to apply the character style to table cell

  I'm sure it's basic, but I can't find any references on how to do it and my attempts have failed.  I use VB and CS5.5

  Basically what I'm trying to do is to select a table cell and apply a character like this style...

  MyCharacterStyle = myDocument.CharacterStyles.Add set

  myCharacterStyle.Name = "TH2".

  myTable2.Cells.Item (1) .appliedCharacterStyle = "TH2".

  with this code, I get a "object does not support this property or method.  myTable2.Cells.Item (...). appliedCharacterStyle ".

  I tried several other versions without success.

  Can someone tell me what would be the proper syntax to apply a character style to text in a table cell, or if it's still the right path to follow on that?

  I have to select the text in the cell rather than the cell itself, and if so, how do you do that?

  Thank you

  You do not need to select the text in the cell, but you need

  to target rather than the cell. It is true that in the user interface, you can

  Select the cell and apply a style of tank, but not with a script. Thus, in

  JavaScript is:

  myCell.texts.item (0) = .appliedCharacterStyle

  app.activeDocument.characterStyles.itemByName ("MyCharStyleName")

  It must be something similar in VB also.

  Of course, you can target the text in different ways:

  myCell.characters.everyItem () or myCell.paragraphs.everyItem () etc etc.

  but I think that the text is the most basic of the lot.

  Ariel

• How to make the field as a table display only?

  A form on a table, I can do the display as field: "view only".
  
  In a tabular presentation, it doesn't seem to be the option "View only" view. In tabular form attributes, I set a default value, and I have no users to edit this field. So, how can we make the field only do "display"?
  
  V4.1

  You can change the definition of the column and change the Display as in "Display text (saved state)" attribute whose value will be the column will be saved with the other columns and the default way.

  Thank you
  -Jorge

• How to make text stand out?

  Hey, noobie here. Only to learn first pro (CS6) and there's something I'm doing that I feel is extremely simple, but yet I can't find a way so that it can work. All I want is for my seem to 'rise' out of the line on the video. What I'm trying to achieve would look like this:

  

  I use the position to make the text to get up, and then I try to wipe linear allows to make a whole line where nothing are, but he simply ignores that it is moving, as it is just to wipe the text and not the window title. I also tried the same thing with the cultures to a cutoff point, no dice. What should I do?

  A culture and a linear wipe should work correctly.

  Like a mask.

  It all depends on how you are setting them up, and most need two layers of video.

• How to make text in mainContent div scaling down on phones?

  Sorry for the awkward question, but how is it that the content in the sidebar and other areas reduce proportionally on a cell phone - iPhone and Android - but the text in the main content is bigger - more than the h1 and h2 titles? Look great on iPad and of course my old laptop awkward, but what can I do to get the text to scale down with the rest of what is in the mainContent div?

  I tried to set the text in the div to a certain px and % but doesn't seem to work. Yet once again, the sidebar scales down, why not the mainContent?

  Thanks for the clues...

  This isn't a sensitive site. Mobile devices use their default Zoom settings to make it more readable on small screens office.

  If you want more control over how pages appear & perform in mobile devices, you have to build with Responsories.

  Nancy O.

• Re: How to make the values in the table as required

  Hi all

  I use JDev11.1.2.3.0

  I have 5 TariffRate (LOV), quantity fields (text input), BillQuantity (text input), amount(input text), calculated quantity (text input). These fields are in the format.not table in the form.here, that the logic is

  BillQuantity = quantity * calculated the amount

  amount = quantity * calculated the quantity * TariffRate

  Here rate rate, calculated quantity, quantity which is mandatory.but I am not able to set the amount and the amount calculated as mandatory.if I select tariffrate in LOV immediately asking amount and quantiy calculated when the property set to true, or quantity.hints.mandatory the problem is that I'm not able to select the value of tariff rate for the second time , now I need to select the quantity and the quantity calculated values first without selecting the rate rate.so how I can configure mandatory for quantity and calculated quantity.can someone help me please.

  I guess you are hit by "required field" error because you refresh the dependent fields (for example, the amount and the calculated quantity) by PPR declarative (for example "partialTriggers" attributes of these fields in the tariff rates field reference). In this way, when you choose a new tariff, ADF Faces includes the fields of PPR - ed in the life cycle, they are validated and they result in errors of "required field".

  You can work around this behavior in the following way:

  • Remove attributes of mandatory fields that depend on the rate of "partialTriggers" (i.e. loose quantity and the quantity calculated rate by removing the attributes 'partialTriggers' of the Quatity field and calculated quantity);
  • Add a ValueChangeListener for the rate field. In the ValueChangeListener add commands for programming up to date dependent fields, for example:

  {} public void tariffRateValueChanged (ValueChangeEvent valueChangeEvent)

  AdfFacesContext.getCurrentInstance () .addPartialTarget (quantityField);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (calculatedQuantityField);

  }

  This way ADF Faces will not include the quantity field and the quantity calculated in the life cycle JSF (and they will not be verified for non-empty values). I use this trick for a long time and it really works.

  Dimitar

• How to make text wrap in 3d space

  I have a donut on his side in 3d on a table. I want my text to wrap around it, so it gets again on both sides. I tried cc bendit, bend, bow, everything seems to bend it in a smile. I need to fold in the space of zed... It is probably simple that I just can't understand it... Thanks for any help

  1. Create a text layer with your text
  2. Add a circular mask for the text layer
  3. The value of the mask none
  4. Set path Options to the path 1
  5. Make the layer 3D text
  6. Since the menu animate Enable 3D perCharacter
  7. Add a rotation animation
  8. Rotate the facilitator 1 X 90 ° rotation
  9. Rotate the text of layer - 90º x
  10. Refine the rotation of a text layer X transform property to match the perspective of the shot
  11. Adjust the baseline shift or the size of the mask to adjust the position of the text
  12. Adjust the position

  It looks like this:

  

• How to make text in the query of the child

  Hello
  
  I need to put a text where are child records that says "not found IN.."
  
  Oracle 10G
  report design consist of recordings of group and the child a man
  
  ex:
  
  main subquery
  P44001 desc BOMqty date1 total qty line1 ponum1
  .. .date2 qty line12 ponum1
  .. .date2 qty ponum2 line3
  
  P44002 desc BOMqty don't total "no found in.".
  
  P44003 desc BOMqty date4 total qty 4 ponum1
  ... date2 qty line2 ponum1
  ... date2 qty line5 ponum2
  
  
  Thank you
  Harsha

  Hi, Harsha,

  This sounds like a job for OUTER JOIN.
  For example, using tables of scott:

  SELECT       d.deptno
  ,       d.dname
  ,       NVL2 ( e.deptno
              , e.ename
              , 'No emp found'
              )     AS ename
  FROM              scott.dept  d
  LEFT OUTER JOIN      scott.emp   e  ON  e.deptno  = d.deptno
  ORDER BY  d.deptno
  ;
  

  Output:

  `   DEPTNO    DNAME             ENAME
  ----------    --------------    ------------
          10    ACCOUNTING        CLARK
          10    ACCOUNTING        KING
          10    ACCOUNTING        MILLER
          20    RESEARCH          JONES
          20    RESEARCH          FORD
          20    RESEARCH          ADAMS
          20    RESEARCH          SMITH
          20    RESEARCH          SCOTT
          30    SALES             WARD
          30    SALES             TURNER
          30    SALES             ALLEN
          30    SALES             JAMES
          30    SALES             BLAKE
          30    SALES             MARTIN
          40    OPERATIONS        No emp found
  

  Notes deptno = 40, which is located in the Department, but not in the EMP.
  If ename happened to be null in the emp, then the NULL appear in the ename column. If ename cannot be NULL, you can replace the NVL2 expression with

  NVL (e,ename, 'No emp found')
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  If you can demonstrate the problem using tables commonly available (such as the scott schema) then you don't have to display the sample data: right after the results and explanations.
  Always say what version of Oracle you are using (for example, 10.2.0.4.0). There is no version 10F or 10H, so it's kind of silly to say you have 10G
  See the FAQ forum {message identifier: = 9360002}

• How to make text disappear when the mouse is over a button?

  Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.

  Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.

  How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?

  I hope what I said makes sense.

  You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible.  In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".

  btn.onRollOver = function() {}

  text_mc._visible = false;

  }

  btn.onRollOut = function() {}

  text_mc._visible = true;

  }

• How to make text retains its value...

  Hello world

  I currently have difficulties with the text entry fields. I have a flash file that begins with a form for the user to enter text. Once they have their input text they click a button to continue and user is now displayed a results page include text that they come to enter. What I managed to do it.

  However, when you click on the "back button" to return to the form, possibly to correct a mistake they could, it seems that the text that they had registered previously has now disappeared, and text entry fields are returned in their original condition.

  Did someone knows how can I let my users come back to the form to make changes to text and have the form to remember what text was the registration of the user and do not wipe the text fields empty?

  Your help with this would be greatly appreciated

  When your form is first presented to the user, initialize the variables.  When subsequently presented, call restoreF().  When advancing beyond your form, call storeF().  for example, when the form is submitted the following may run every time

  var tfObj:Object;

  {if(tfObj==null)}

  tfObj = new Object();

  var tfA:Array = [enter your textfields];

  } else {}

  restoreF();

  }

  -the code between the dotted lines should run once-

  Call storeF() when you want to store text properties

  function storeF() {}

  for (var i: uint = 0; i<>

  tfObj [tfA [i] .name] is tfA [i] .text;.

  }

  }

  Call restoreF() when you want to restore the text properties

  function restoreF() {}

  for (var i: uint = 0; i<>

  {if(tfObj[tfA[i]]!=undefined)}

  tfA [i] .text = tfObj [tfA [i] .name];

  }

  }

  }

  // ----------------------------------------------------------------------------------------- ----------------------------------------

• How to make text does not interfere with the rollover effects in the image below

  I have images that zoom slightly when the mouse passes over them, but I need a title text on them. When the mouse is over the text, it prevents the zoom effect doesn't happen. Is there anyway to make the "invisible" to the cursor text and does not interfere with the effects of overview below? I know that I can make the text in the images, but I don't want the text to expand it, just the image.

  You can use a button on the State.