HP Pavilion Slimline s5212y: my camera to DVD A DH16AAL ATA s5212y Pavilion not recognized in the system after the installation of Windows 10.
After you have installed the free version of Microsoft Windows 10, I realized that my DVD was neither effective nor recognized in Device Manager. Try as I may to address the support of hp in any problems and try to find updates or fixes to the problem, I have since restored my OS to the older operating system to Windows 7.
I would like to know if there is a simple patch patch out there in the community that would allow my DVD-ROM to 'see' if I chose to upgrade to Windows 10?
If there is a "patch" of sorts, I need to have the new operating system installed first?
Hello:
The only suggestion I can offer if you haven't tried these, would be to perform the steps listed in each step resolution 3 or 5 from the link below. Try them both.
https://support.Microsoft.com/en-us/KB/314060
Tags: HP Desktops
Similar Questions
-
HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP
name of the product - hp pavilion g4-1304au notebookpc
product no - #ACJ D4X79PC
processor - AMD A4 - 3330 X
During the installation of windows XP, it shows an error that the "mass storage is not recognized.
Please give me Slipstreamer pilot for the specification above.
You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.
Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.
Also, if there is a parameter called "Secure Boot", disable it.
I hope this helps.
-
CD/DVD-ROM not recognized since the installation of Vista, without errors
Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Web Cam not recognized since the upgrade to Windows 7
I've recently updated my Toshiba Satellite Windows Vista to Windows 7. Skype now does not recognize my web cam. How can I fix it?
By getting the win7 drivers and Tosh photo app supports, specific to your model, they provide win7 drivers, if it's not vista drivers usually work
-
DVD drive on laptop does not work since the installation of Windows 8
The DVD player on my laptop would not consider movies since I installed Windows 8. Any ideas what app or service should be addressed to make it work. I don't know if it is a hardware problem (I doubt it, it worked fine before) or a video software problem. Any suggestion would be appreciated.
Unfortunately, Windows 8 does not natively support playback of DVD movies. You need to install a Windows Media Center (no player) or a 3rd party application.
I recommend VLC - a free, open-source media player. It will play DVD files immediately after installation. Additional measures must be taken if you have a Blu - Ray player on your device.
-
I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8. My system does not recognize my DVD NEC drive due to recording possible file corruption. How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?
http://support.Microsoft.com/kb/314060
FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).
Let us know how you go.
Tricky
-
HDD and dvd are not recognized in the configuration menu, what could be the problem?
The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f. What is a controller failure? A PCI controller can be used to replace the motherboard controller?
dhobs,
Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)
You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.
Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.
-
cd/DVD drives not recognized by the computer.
Some full scans there is our operating system to xp does not recognize our 2 dvd/cd players after a full scan, by security essentials.
We went into the control panel to check the cd/dvd drivers... and they were gone. Then we went in the 'my computer' window, and neither one of them were there either. It's like they were never there. We can somehow reset something to collect, to use?Hello
I see that the CD is missing on the computer.
- You did changes to the computer before the show?
- The computer is connected to a network?
- Is detected in Device Manager?
Device Manager provides a graphical display of the hardware installed on the computer, as well as the device drivers and resources associated with this material. Using the Device Manager provides a central point to change the way the hardware is configured and interacts with the microprocessor of the computer.
To access Device Manager, try the following steps:
Click Start, click run, and then type devmgmt.msc.
Note:
Let us know the result.
Now, you can read the following article and try the steps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Note:
Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following articlehttp://support.microsoft.com/kb/322756
If the problem persists, or you need help with Windows let us know.
-
Your CD or DVD drive is missing or is not recognized by Windows or other programs
I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?
shanglur,
If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...
Your CD or DVD drive is missing or is not recognized by Windows or other programs
But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.
Rick
-
CD or DVD drive is missing or is not recognized by Windows
Original title: another question about the DVD drive is not detected in Windows 7
I have the same problem that many others have described here on the DVDR drive not detected after installing Windows 7. I still have not solved this issue. But I have another similar problem. The system will not recognize an external USB DVDR drive connected to a USB port. In essence, I have no access to the internal drive (in a Dell Inspiron 1545) or the external hard drive. Without access to a DVD player I can't even uninstall Windows 7, and I can not install or save anything else without a drive. I'm at my wits end. If anyone can help I will shower you with praise.
Hi Therevmrbill,
Scenario 1:
Reference:
Your CD or DVD drive is missing or is not recognized by Windows or other programs.
http://support.Microsoft.com/kb/982116
Scenario 2:
1 try to connect the DVD USB drive on another computer and check if the problem persists.
2. try to connect other USB devices to the computer and check if it is detected.
Try to run the troubleshooter and see if the problem is resolved.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
My DVD RW disappeared. It is not listed in the Device Manager either.
I tried deleting the upper and lower filters. That did not work. He did not allow the reader to turn well. I opened the computer to check the water and that's fine. What can I do? I called the store that installed and they said that the pilots are on VISTA and there was nothing they could do. I don't know what brand of DVD it is. On the invoice they have listed black DVD RW. It has been installed two years ago and has not been used very much. Thanks for the help.
Randy
Hello
1 reboot just in case.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit. I ran the Windows 7 Upgrade Advisor, which was positive.
The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.I tried to restart the computer and also the start of the player directly in the BIOS.In the BIOS I have the following message:"No available boot device.Press the ENTER key to try againSATA-0: installedSATA-1: installedSATA-4: noSATA-5: noYour CD or DVD drive is missing or is not recognized by Windows or other programs
Fix for CD/DVD drive missing:
http://support.Microsoft.com/kb/982116
If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.
-
I bought a DVD with 6 Lightroom but I can´t fullfill the installation process on my PC (W10). Instead, I receive an invitation to join a group of clouds. What bad, please help me.
Gunnar
Hi Gunnar,
You can ignore this invitation and install directly 6 Lightroom using your DVD or can be downloaded from this link: Install Photoshop Lightroom
Kind regards
Claes
-
L.R., I cannot import the photo of the new camera. Get the following message: "some files are not recognized by the raw format support in Lightroom." Click below to view a version update of Lightroom. Done this and updated Lightroom 4.4. Still cannot import - get the same message.
Devices supported by Adobe Camera Raw
The D610 requires LR version 5.3 or newer.
If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.
-
I recently bought a new camera from Sony a7 - ii. the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7. What should I do to get these files imported as raw files?
Hi Bobsirkus,
The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.
Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices
You can use the DNG Converter, converts images and then import them into DNG in Lightroom.
Kind regards
Tanuj
Maybe you are looking for
-
My thunderbird will not load any of the other records as drafts or sent it will load only inbox
-
my computer is useless until it 'heats' for 15 minutes - how to fix this?
After that I turned on my laptop, I have to have at least 15 minutes to use it as it became so slow. I get "not responding" much. There is no virus detected. I have a Toshiba Satellite that is about 6 years old.
-
Your system RAM is low Message
Can someone help me. How can I find what is using my RAM so that it is low (because it does not). I'm on Windows Vista Home Premium o/s, 32-bit version. I have 2 GB of RAM and the computer had no mods. 250 GB HD I just made a recovery in the factory,
-
Android update will not install place 3830
Once every two weeks or so, I get a notice that I had an Android update. I click on the Android update and it starts to install and then stops after about 10 to 12 seconds. Then it says error and stops, then restarts and everything is normal. I'm sti
-
ACM 02/07/32 install.exe is not a valid win32 application
Download att comm manager