How to make text stand out?
Hey, noobie here. Only to learn first pro (CS6) and there's something I'm doing that I feel is extremely simple, but yet I can't find a way so that it can work. All I want is for my seem to 'rise' out of the line on the video. What I'm trying to achieve would look like this:
I use the position to make the text to get up, and then I try to wipe linear allows to make a whole line where nothing are, but he simply ignores that it is moving, as it is just to wipe the text and not the window title. I also tried the same thing with the cultures to a cutoff point, no dice. What should I do?
A culture and a linear wipe should work correctly.
Like a mask.
It all depends on how you are setting them up, and most need two layers of video.
Tags: Premiere
Similar Questions
-
Hi all!
I have a picture of a bottle containing a reddish cinnamon liquid. There is a line of text on the bottle which needs to stand out much better... Screenshot attached of the actual bottle of samples, close them up.
Can anyone suggest how to get the text to pop w/o touching the back at all? I played a lot with the levels, but it doesn't help; the background reflects the changes. And it is almost impossible to get a good selection on the text portion (unless I do this pixel by pixel).
Hoping that someone with much better PS smarts can give me an overview. If possible, I will probably need almost the instructions.
Thanks in advance!
Jerry
Top: Original
In the Middle: layer above the background layer
Bottom: Final
***********
I hope that you can start with a very focused image, then:
Select > range of colors... and choose white lettering
Lead the two sliders all the way to the right and click OK
Cmd + J to move the selection on its own layer. Lock the transparent part of the layer using the symbol at the top of the layers panel
Change the blending mode of the layer to screen
Hold down the Option key and click on the symbol of the mask. The mask will be black.
Paint with the brush 100% white. No need to be careful... only the type will be affected. The red background is not affected
-
How to make my system out of safe mode?
How to make my system out of safe mode? I caused this problem myself when I went into the control panel while trying to improve startup speed.
original title: Safe ModePlease press the Windows key and the R key on your keyboard together. Now, you will get a run window. In the immediate window please type MSCONFIG and press Ok...
Now, you will get a new window called System Configuration / System Configuration utility.
Go to the general tab and select the Normal startup option and press Applay. OKRestart the computer... Now your computer will begin upward in Normal mode...
-
I get my email on two computers. How to make a computer out of the loop?
I get my email on two computers. How to make a computer out of the loop without jeopardizing my Comcast email account?
Using Outlook Express? Go to: tools | Accounts and delete the account. If you think you can it in the future, go to the properties of the account, and under the general tab, simply uncheck: include this account when receiving or synchronization.
If you are interested, you can receive messages at a time without losing them on one.
On both machines:
Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.
On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.
-
How to make text tabled clothes out / disabled
Hello
I have a text field and I put the following property...
This field is read-only now.HTML Form Element Attributes:- readOnly=true
HOW to make this field looks like a field of disabled, something like filling in the background with the color gray.
Thank you
DeepakHi Deepak,
You can always add the width in the style:
style="background-color:#E4E4E4; border:1px inset #F0F0F0; padding:2px; width:100px; display:block;"
Andy
-
How to make text read-only once it is recorded and distributed on the ground?
How to make a read-only text field after it is registered adistributed d?
LiveCycle Designer ARE 8.2
Exit this JavaScript code on the event:
textField1.access = "readOnly";
This works after the user loses the focus on the field, but after it is saved and distributed, this field is no longer "read only".
I need to have staff insert information into a text field and try it then distribute to clients, and these fields must be protected.
How do you do that?
No... .it has to be there to be a schema valid... but it is not used by the product offline.
Paul
-
How to make text appear n disappear?
When an event is true, a text appears on the front panel. If set to false, the text disappears.
I know that we can use a property node for other things like the LED, but I have no idea how do for text.
Pls help.
p/s - say nothing pop ups
TQ
Hi fmpfmpf,
You can use an indicator of the chain. Place outside your case our structure to specify a different value for your different instances of the event.
Mike
-
How to make text in mainContent div scaling down on phones?
Sorry for the awkward question, but how is it that the content in the sidebar and other areas reduce proportionally on a cell phone - iPhone and Android - but the text in the main content is bigger - more than the h1 and h2 titles? Look great on iPad and of course my old laptop awkward, but what can I do to get the text to scale down with the rest of what is in the mainContent div?
I tried to set the text in the div to a certain px and % but doesn't seem to work. Yet once again, the sidebar scales down, why not the mainContent?
Thanks for the clues...
This isn't a sensitive site. Mobile devices use their default Zoom settings to make it more readable on small screens office.
If you want more control over how pages appear & perform in mobile devices, you have to build with Responsories.
Nancy O.
-
How to make text in the query of the child
Hello
I need to put a text where are child records that says "not found IN.."
Oracle 10G
report design consist of recordings of group and the child a man
ex:
main subquery
P44001 desc BOMqty date1 total qty line1 ponum1
.. .date2 qty line12 ponum1
.. .date2 qty ponum2 line3
P44002 desc BOMqty don't total "no found in.".
P44003 desc BOMqty date4 total qty 4 ponum1
... date2 qty line2 ponum1
... date2 qty line5 ponum2
Thank you
HarshaHi, Harsha,
This sounds like a job for OUTER JOIN.
For example, using tables of scott:SELECT d.deptno , d.dname , NVL2 ( e.deptno , e.ename , 'No emp found' ) AS ename FROM scott.dept d LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno ORDER BY d.deptno ;
Output:
` DEPTNO DNAME ENAME ---------- -------------- ------------ 10 ACCOUNTING CLARK 10 ACCOUNTING KING 10 ACCOUNTING MILLER 20 RESEARCH JONES 20 RESEARCH FORD 20 RESEARCH ADAMS 20 RESEARCH SMITH 20 RESEARCH SCOTT 30 SALES WARD 30 SALES TURNER 30 SALES ALLEN 30 SALES JAMES 30 SALES BLAKE 30 SALES MARTIN 40 OPERATIONS No emp found
Notes deptno = 40, which is located in the Department, but not in the EMP.
If ename happened to be null in the emp, then the NULL appear in the ename column. If ename cannot be NULL, you can replace the NVL2 expression withNVL (e,ename, 'No emp found')
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
Explain, using specific examples, how you get these results from these data.
If you can demonstrate the problem using tables commonly available (such as the scott schema) then you don't have to display the sample data: right after the results and explanations.
Always say what version of Oracle you are using (for example, 10.2.0.4.0). There is no version 10F or 10H, so it's kind of silly to say you have 10G
See the FAQ forum {message identifier: = 9360002} -
How to make text disappear when the mouse is over a button?
Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.
Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.
How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?
I hope what I said makes sense.
You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible. In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".
btn.onRollOver = function() {}
text_mc._visible = false;
}
btn.onRollOut = function() {}
text_mc._visible = true;
}
-
How to make an object out of the screen?
Hello everyone!
I create a game introduction with Flash pro CS6 and here is my problem.
I want an object in my animation to exit the screen, but I don't know how to do it.
Is there for example, that a way of defined work area, so that when I do something out of this area, it does not appear in my final animation (regardless of the format, .avi, .mov, spritesheets...) or may be "cut" (if I make my object inside the arear half-and-half work outside)?
Is there another way to do this?
Thank you!
With the help of a mask can be a way.
-
How to make text retains its value...
Hello world
I currently have difficulties with the text entry fields. I have a flash file that begins with a form for the user to enter text. Once they have their input text they click a button to continue and user is now displayed a results page include text that they come to enter. What I managed to do it.
However, when you click on the "back button" to return to the form, possibly to correct a mistake they could, it seems that the text that they had registered previously has now disappeared, and text entry fields are returned in their original condition.
Did someone knows how can I let my users come back to the form to make changes to text and have the form to remember what text was the registration of the user and do not wipe the text fields empty?
Your help with this would be greatly appreciated
When your form is first presented to the user, initialize the variables. When subsequently presented, call restoreF(). When advancing beyond your form, call storeF(). for example, when the form is submitted the following may run every time
var tfObj:Object;
{if(tfObj==null)}
tfObj = new Object();
var tfA:Array = [enter your textfields];
} else {}
restoreF();
}
-the code between the dotted lines should run once-
Call storeF() when you want to store text properties
function storeF() {}
for (var i: uint = 0; i<>
tfObj [tfA [i] .name] is tfA [i] .text;.
}
}
Call restoreF() when you want to restore the text properties
function restoreF() {}
for (var i: uint = 0; i<>
{if(tfObj[tfA[i]]!=undefined)}
tfA [i] .text = tfObj [tfA [i] .name];
}
}
}
// ----------------------------------------------------------------------------------------- ----------------------------------------
-
How to make the State "out-of-box' again on my Satellite L653-12J
Hello
I have been in charge of research and following the instructions but all have failed.
I'm selling my Toshiba Satellite computer laptop L653-12J with Windows 7 and I would like to clean the hard drive of all the data added to have it back to its out of the box state.Please advise me how?
Thanks and regards,Kamal
Hello Kamal
How to install the recovery image, which you can read on follow Toshiba document -.
http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htmIt works for you?
-
How to make text appear darker on the screen?
The text on the screen is gray. Here the words to find more dark & appear more clearly on the white background.
Hello
From your problem description, I understand that you want to customize the display settings so that the text should appear darker on the screen.
What is the brand and model of your monitor and your computer?
We cannot change the font color of desktop. They are dynamic and show white on dark background and change in white with a shadow effect black on a light background.
I suggest you refer to the suggestions below and check it it helps.
Method 1:
a. type click Calibrate display color, in the search box and press press Windows key + W (it will be charming setting pop-up Windows 8), Enter.
b. calibration color screen, click Next to continue.
c. follow the instructions on the screen and check if it improves the display of your monitor.
Method 2: I suggest you to refer to the manual of the monitor and adjust the brightness, the contrast of different values.
Also check out this link:
Get the best display on your monitorhttp://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
Hope the above information is helpful.
-
How to make text does not interfere with the rollover effects in the image below
I have images that zoom slightly when the mouse passes over them, but I need a title text on them. When the mouse is over the text, it prevents the zoom effect doesn't happen. Is there anyway to make the "invisible" to the cursor text and does not interfere with the effects of overview below? I know that I can make the text in the images, but I don't want the text to expand it, just the image.
You can use a button on the State.
Maybe you are looking for
-
Satellite Pro L10: Failed installation shortcuts keyboard F1/3/4
Recently, hard drive formatted and reinstalled windows. Keyboard shortcuts (fn + F1/3/4) not working and others have not changes (e.g. volume up but it does not show me the meter). Tried to reinstall the tools & utilities cd and downloaded the driver
-
Can not get picture it 2002 to run in Windows XP
I have picture it 2002 I downloaded it on my windows xp computer, it loads fine, but when I try to use it it closes its doors, I reinstalled several times but can't make it work.
-
Hello I have a laptop (Compaq 8440) running Windows Vista Enterprise (not yet upgraded to SP1). I have a shared folder mapped to the N: drive on my laptop. This shared folder is located on a computer on my home network. Every day, I move my laptop
-
Extract the file to a zip file
Why didn't we a choice "extract file" when I right-click a .zip file downloaded?
-
New Alienware 14 left keyboard, not upward lighting
Hello I bought the new alienware 14 and to the right of the center of the keyboard and the left side box does not illuminate. All the others are fine.