How to make webserive secure in 11g

Similar Questions

• How to make a secure network

  Just recently someone uses our internet to download whatever want them. I have a computer at home and 2 laptops and one pc connected to the internet. Is it possible to just restrict to these 3 as well as the House and make a secure network?

  Thank you, Tom

  type 192.168.0.1 in the URL bar of your browser (if it does not, type 192.168.1.1) and click on enter. Your router wireless page will appear. Connect to your router using the username admin and the password you defined (if any). The settings you change will be in the settings or wireless settings menus, but it's different for several routers, so you will need to explore the menus.

  You'll want to define the type of WPA security and use a long hard to guess the password.

  teengeek.freehostingcloud.com Microsoft community contributor

• How to make a secure non-secure Web site so that I can use it?

  I try to use a Web site that I have used literally thousands of times and now firefox it won't open because the site is not a security certificate. I can't find anything to ignore it and I'm completely out of options now.

  I found another issue that has the same problem and got it fixed. Thank you very much!

• How to make panelTabbed scrollable in 11G

  Hi all
  
  I tried to use different panels inside the tabs Panel to make it floating. Also tried setting the property of Panel scroll, but without success.
  I also tried my statically defining the size of the pixel, but no luck. I want to make the Panel scrollable tabs if I use
  several components then user should be able to scroll through and go down to see the components below.
  
  Please help me it is very urgent.
  
  Thanks in advance.

  Hello

  the panelTab no amine by itself. you use a provision of panelGroup with the presentation of "scrolling" in the tab or surrounding

  Frank

• How to reset my security on my icloud question. I forgot and I can't make changes without it

  Hello. How to reset my security on my icloud question?. I forgot and I can't make changes without it

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (140728)

• How to make a page go to a secure as https Server?

  How to make a page go to a secure as https Server?

  'S done it with your hosting provider. Nothing you can do in Muse to define.

• How to make a simultaneous report use security profiles?

  Hello
  
  I would like to create a custom report (submitted via the concurrent application screen) who will use the safety profile of responsibility that runs.
  
  A test, I've defined a report which is the query from the view of safety per_people_f. I already have security profiles that limit the records per person.
  
  When I run this test, it retrieves all individuals, not just those who expected the security profile.
  
  I'm doing something wrong?
  
  Thank you!
  
  Published by: user12022286 on November 28, 2012 18:54
  
  Published by: user12022286 on November 28, 2012 18:55

  PL post Details of the operating system, database and versions EBS. PL see if this Doc MOS can help you

  How to enable HR security on custom reports? [369345.1 ID]

  PL see also previous discussions on this topic

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=security+and+profile+and+custom+and+concurrent&objid=C3&DateRange=all&userid=&NumResults=15

  HTH
  Srini

• How to make still photos of my camera of Lenovo to the appropriate library to upload on a social networking site (Facebook, not)?

  First of all, I'm 50 years old and I grew up in the time before the PC, so I am very naïve.

  I have a laptop from Lenovo and it has a camera in it. I recently discovered that it can take still pictures, so I took some pictures of me.

  Now I want to download pictures to an online community, I belong to where I have a profile. But the photos are not in my images on Microsoft Word, or in Windows Media Player or any library I can find.  They are in the box in the photo section.  How can I get them on the part of the camera on the computer in a place where I can then download them to my profile online? Where should I store, and how to make them here?
  I appreciate your help.

  Hi James,

  I see you want to download photos of the Lenovo built in webcam for a social networking site still. I'll help you with this problem.

  1. what operating system is installed on the computer?

  2. what security software is installed on the computer?

  Please follow these steps and let us know the status.

  1 - click on "Start" and start the webcam software. Every computer manufacturer take its computers ready webcam with a specific software for the control of the camera.

  2 - Click on 'Snapshot' or 'Take picture' (or similar) in the program to capture still images. Most of the programs of webcam show you what see your webcam, as soon as the program is open. When you move, the webcam image also moves. Specific commands vary from one program to a program and manufacturer in the manufacturers, but the standard webcam software has a "snapshot" command to take a picture.

  3 - Click on 'Tools' and 'Settings' (once again, or similar) to change the way the webcam records still images. You can configure the quality of the photos up to a preset maximum resolution. A webcam software allows you to save a series of images or to add digital effects to the pictures. That depends on the camera photo and its software by default, too. While in the 'Settings' window, find out where the pictures are stored. Each program stores pictures in a different location.

  4 - Click 'Start' and 'Computer' to open a file browser. Find the folder where the webcam stores its photos of step 3 to change the photos with a graphics program or to delete and rename files. To send photos to your friends and family, open your email and attach photos to this folder. Webcams store photos in smaller resolutions, so you never get hurt to send these files as attachments, even with a very slow Internet connection.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How to make a lock off the internet so I can have another WiFi computer using the internet

  How to make a lock off the internet so I can have another WiFi computer using the internet

  you do not take the lock itself.

  Instead, you configure another computer with security information to access the connection Wireless secure.

  Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

  However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.

• How to make a private folder in xp

  the drop-down list of the sharing folder doesn't let me make a folder crearion

  HOW to: Set the My Documents folder as "private" in Windows XP - http://support.microsoft.com/kb/298399
  http://www.microsoft.com/learning/books/homeandofficeuser/tips/040402.asp - how to make My Documents private in XP Home

  You can make My Documents private in XP Home. Since you don't mention what version of XP you are using, your end goal is, if it is a home or work computer, etc. I can only give you the following background information. If you are in need of more detail, thanks for posting back with missing details about your situation.

  XP does not use passwords to protect resources. NT operating systems use the permissions. Here's the information to help you with that:

  How to disable Simple Sharing and set permissions on a folder shared in Windows XP (Pro only)
  http://support.Microsoft.com/?kbid=307874

  How to configure file sharing in Windows XP (includes information about permissions):
  http://support.Microsoft.com/kb/304040

  By default in XP Home you can only files and folders under My Documents "private". Otherwise, to display the Security tab in Windows XP Home, restart in safe mode and log on with an account that has administrator privileges. Go in Safe Mode, press the F8 key as the computer starts. That you will get the menu where you can choose Safe Mode.

  Note that the file system must be NTFS, FAT32 not.

  Passwording of folders is not possible unless you their zip. When you do (right click on a folder, then "send to > compressed folder") and then open the zip file, you will find an option under file > "add a password." Otherwise, use a third-party software. Google "password protect folders".

  MS - MVP - Elephant Boy computers - don't panic!

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• How to change the security settings on a wireless network

  I would change the existing network security settings to WPA2, AES, or at least from TKIP AES.

  I am familiar with access via browser to the router and how to change the settings of the router.

  My question is how to make this as painless as possible for the network.  Step by step would be great

  First of all, I guess I have to change the settings of the router using the computer running Easy Link Advisor?

  Do I then have to disconnect/reconnect this computer?

  Do I have to unplug all the other computers and then sign in again with the update settings?

  The change of security settings affect my print server?  If so, I put up from scratch in ELA?

  For the record, I have a WRT 300N and the print server is a 54g.

  Anyone who reads this can also focus on recent news.  Maybe not a big deal, but a WPA/TKIP vulnerabilities has been identified.

  Thanks in advance to anyone who responds.

  If you change the router's wireless security settings, it will affect all devices that connect wireless to the router. To change the settings, simply set until you want on the web interface of the router. Save the settings. You need not link to that Advisor. Direct access to the web interface of the router is sufficient and preferable.

  All devices configured to connect to this network should ask if they connect more. It depends on type of what you had before. If you have not used WPA2 or WPA before having to ask for the password. If you used the WPA or WPA2 with the same password that they cannot even ask the password. How it works in detail with a specific wireless device depends on the device and the software you use. Some devices may require you to first remove the network wireless in the list of "preferred networks" and then reconnect.

  Check the manual of the print server how to configure for the new security settings. You should be able to reconfigure the print server through a web interface. First, it is probably best to change the settings on the print server and then make the change on the router. Otherwise, you may have a hard time, connection to the print server to make the change. In addition, depending on how old the print server is that it cannot even support WPA2 and AES.

• How do I enter secure folders?

  Everything tonight.
  I use Vista Business SP2 (I just left XPPro SP3 and it uses actually still at the office).
  I need to move some files on my USB xlam in microsoft add ins folder and move my xlsb file in the xlstart folder.
  At the opening of the windows Explorer, I find that whenever I go to access the folder that brings me to the here - it keeps telling me that I'm not allowed to do yes - I am the computer administrator, and my account is the admin account.

  I found an article that supposedly explains how unlock these files to give me a control total, but after that, it still won't let me.

  For example,.

  * On Windows Vista business, enterprise or ultimate edition:

  1. Click Start, type secpol.msc in the search box, then press enter
  2. In the list on the left, click local policies, and then Security Options
  3. The value accounts: administrator account status to "Enabled"
  4. Set user account control: administrator on behalf of administrator approval Mode integrated for disabled

  http://www.lancelhoff.com/how-to-make-Windows-Vista-Admin-account-act-like-XP/

  Does anyone know how to get full access to files/folders hidden from my computer, I already have to show?

  While I appreciate to know that windows did a bang up job of protecting my system, I'm an old hat in the complexity of the system and simply move files to locations for Excel 2007.

  Thank you for your time and your answer to my question.
  Best.

  Hello

  I suggest that you check the steps below to take possession of a hard drive.

  (a) with the right button of the hardrive/partition that you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on edit. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  (f) click OK.

  For more information, see the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• I accidentally deleted photos a year ago. How to make a comeback?

  I deleted accedentally photos a year ago.  How to make a comeback?  I tried to delete a virus in my computer and worked with a security system that was trying to sell me their guard.  He kept interfering with my system with block etc.  In the end I lost photos.  Help

  That's why scientists always say "backup your stuff."  Hard 2 TB disks less than $100 USD for a while now.  Drag-and-drop / copy still works paste as a decent (albeit limited) method of backup and set up a scheduled backup to it's easy.  It will not solve your problem - but surely you are is no longer one of those who say, it's never happened before, why should I worry about this... »

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.