How to manually start the FSX helicopter?

Similar Questions

• How do I create a pause between songs in my playlists? Manually start the next song?

  How do I create a pause between songs in my playlists?  Manually start the next song?  I use XP with WMP11

  The following freeware will allow you to add as much
  (1 to 100 seconds) pause between tracks that you need:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• Satellite 2450: How do I start the laptop with the lid closed (LCD).

  I have connected the switch of power with cables and stretched it out and it works fine.

  My question is how can I start the computer with the lid closed? Is there a switch that allows the computer to know when the lid is closed or not? Can I remove this? where is this switch?

  This option can be disabled threw the bios of the computer and how?

  Any help apreciated

  Well, you should be able to boot up your laptop in this way, but how to market? The power button on my laptop is under the cover.

  And Yes, there is a kind of switch, which leave the phone know that the door is closed, but it's only important in Windows, it does not close or go on stand-by.

  To avoid this, just set power options to do nothing on a closed lid.

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• Latitude E6510 - how I manually access the Dell system recovery partition?

  Latitude E6510 - how I manually access the Dell system recovery partition?

  Hi all

  My Dell Latitude E6510 came with OEM Win 7 Pro x 64 installed. I am trying to perform a restore of the system to the factory setting.

  I tried to access advanced without result Boot Options and pressing F12 during the boot process does not provide me with the option to repair and select the recovery partition, as if it is invisible. If I use the computer management > storage I do not see the hidden partition or if I do Diskpart it is listed.

  How the BIOS or the system recognize it to boot from the recovery partition? Thanks in advance.

  

  

  Thanks for your reply but it appears not the solution you provided helped and I think you are incorrect since my original screenshot has allowed me to see the hidden partition, but I didn't know how to access it.

  I got access once I used the app "diskpart" with commands like 'list readers', 'list volume' and 'assign volumes"to access the partition of the content.

  Nevertheless, I have found that my recovery media is missing or damaged.

• How do I start the installation of windows 7 started without back up

  How do I start the installation of windows 7 started without back up
  as I reinstall my windows 7, that the installation process has been abandoned that I forgot to plug in the charger and it now displays "windows installation was not completed. to install windows on this computer, restart the installation "How can I restart the installation..." i havnt made any recovery

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• How can I start the database without using crsctl? ~ Xev

  Hey guys, it's Xev.

  I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.

  How to use srvctl to put the database in a mode of editing?

  I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?

  Thank you

  Xev.

  Xev Bellringer wrote:

  Ho Toby, when I try this command, srvctl start db d db_unique_name o mount

  It gives me the following two errors:

  PRCD-1027 unable to recover the RAC database

  RPRC-1070 has been unable to verify

  I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.

  I have crs stack while I do this? If yes how do I start the CRS battery without the database?

  Hi Xev

  On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.

  Remember: -.

  1 take a full backup still running (assume that you already have).

  2. make cluster_database = false, before starting the recovery.

  3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.

  4 restore the db.

  5. you start db.

  6. set cluster_database = true.

  7. stop your db in normal mode, immediate.

  8. start your database by srvctl

  Good luck...

  Concerning

  Jihane Narain Sylca

• Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Yes, you can do it using a script. This code should do the trick:

  this.movePage (this.numPages - 1, -1);

• How to manually change the catalog has / B and invalidate the cache of formhandler

  Hello
  
  How to manually change the catalog has / B, as when doing JIU there are active or not active catalog, a catalog of make us changes and deploy the project, it will automatically do that.
  
  I want to do the same to my formhandler, I was wondering how should I do? There should be a manager class that will handle this, I want to know what call class.method and other changes needed to be made.
  
  Thanks in advance

  FormHandler appeal:

  void switchDS() {}
  SDS SwitchingDataSource is getProductCatalog () .getDataSource ();.
  sds.prepareSwitch ();
  sds.performSwitch ();
  getProductCatalog () .invalidateCache ();

  }

  Peace
  Shaik

• How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

  Hello.

  When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

  How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

  I tried all the step using the dialog boxes.

  Thank you!

  Hello

  Please use the Windows Vista answers Forum.

  The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

  Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

  1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

  2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

  3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

  4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

  NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

  You can check the link below:

  http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to manually switch the ATI graphics card?

  My laptop is new Pavilion DV6T Quad edition. I want to switch manually between the graphics card Intel inbuild and ATI graphics card. When I check on the internet I have marine I can do this using the switchable graphics option in catalyst control center. But my catalyst control center has only the ability to assign graphic drivers for the application. Also, I've found I can by tyoing ccc ccc advanced on the start menu. But when I typed ccc in that I don't see Advanced ccc all search results I ccc's search results. Please guide me in manual switching graphics

  Hello, I believe that the answer lies in another thread that they keep as a «sticky' at the top of this section "Display/video"

  so here's the link to that thread, that you shows how to download the right driver BIOS and graphics, then how you set it manually in the BIOS for fixed, if that's what you want.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/official-HP-statement-on-switchable-graphics-and-Open-GL/TD-p/766285

  I hope that I understand your request, please let me know if this helps or not.

  Thank you.

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• How to manually extend the DHCP lease periods?

  My ISP set periods of DHCP lease to 30 minutes and I would like to know on how to manually request by extending rental periods before the expiry of the lease.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Talk with your ISP.