How to merge the system partition in the boot?

Similar Questions

• How to upgrade the boot loader?

  We have a Cisco SF300 - 48P 48-Port 10 / 100 PoE switch with Gigabit Uplinks.

  In the documentation for the new 1.3.5.x firmware, it says:

  "Before the upgrade to version 1.3.5 the bootloader must also be updated. If 1.3.5 version using the initial boot loader, file system is not updated to level, and in the future the user will not be able to upgrade to versionshigher than 1.3.5. »

  How to place the boot loader?

  I see nothing in the documents in order to establish what boot loader there.

  We are currently running firmware 1.3.0.62.

  The statistics page says:

  (Image Active) firmware version:	1.3.0.62
  (Non-Active) firmware version:	1.1.2.0
  Version of boot:	1.0.0.4

  What is the best way to properly install this firmware 1.3.5.x?

  Thank you, Tom

  Hello:

  Darren is correct, that you need to update the boot via TFTP code. His instructions are correct for when you get the TFTP server defined and loaded file in it. There are many free TFTP server applications on the net that you can download. One of my favorites for Windows is TFTPD32 (or TFTPD64 for 64-bit machines). There are both free applications Mac but I don't have that I use.

  Once you have a TFTP server installed on your machine, place the file with 'BOOT' in the name of the TFPT Server directory. Directed by Darren: go/file management and select backup/upgrade the Firmware, go to "via TFTP' and select 'Boot Code.' Put the IP address of the server or computer that runs the TFTP software and the name of the file and apply the update.

  Reboot the switch and the bootloader is now updated!

  Then follow the normal procedure for the upgrade of the firmware: go to the file management /-> Firmware Upgrade / Backup-> "via the HTTP protocol' and find your firmware file and apply.

  ~ Nick

  Support of Cisco network engineer

  Please mark responded to post useful!

• How to merge the C drive to the D drive

  My local C drive has 100 GB on it. I have another volume of disk D with gb 122 on it.

  Now, I know that this question has been asked many times before, but I am still very confused with how you can actually merge the two into a main C drive.

  I find it very strange that ASUS (my computer) performs the main drive that is smaller than the other partition.

  All advice is appreciated.

  Thank you.

  Hello

  Windows 7 has the software to do this in disk management, the partitions are adjacent to each other.

  He is recording of data on D: > D: remove > and then extend C: into the unallocated space where D: is

  ""How to extend a Partition or Volume in Windows 7 " "

  http://www.SevenForums.com/tutorials/2670-partition-volume-extend.html

  See you soon.

• How to merge the C: and D: drive into one?

  I have a laptop replacement, once again and now I realize that when I install games, game files will be found in the c drive which is only 100 GB, while the D: drive is Go 930, it wont let me install more files as c drive is already full. Is there any method to merge the 2 drives into one?

  Andre_Castillo14

  so I have to uninstall the game and reinstall on drive D:

  Right.

  And to answer your original question... no way to "merge records". Especially not when they are 2 physical disks separated with a disk on each partition.

• How to merge the event structures?

  I have a program of VI script that reads a text file of records and displays a structure of the event.  It works very well because it creates all the controls and indicators I need associated with the defined registry and code backend (i.e. the structure of the event).

  After I generated all this code, I copy and paste in the main VI I develop.  Everything works very well.  The only problem is that there are 100 text files from separate registry.  This means that I end up with 100 separate event structures.  Although it works, it takes a lot of space and I prefer to combine them.  However, each event structure has anywhere from 15 to 75 entries, so to do this manually is not an option.

  Is it possible to selectively merge the event automatically structures?

  I guess I could write a labview scripting routine that could get a reference to the structure of the event in VI, then merge... but part of the problem there is that there are a handful of structures of event I want to separate them just because they are not associated with the set of registers, that I mentioned.

  
  

• How to merge the images in layers?

  Can someone tell me if it is possible to merge the images into layers in Illustrator CS3?

  I'm used to doing with Photoshop. I thought the merger of Pathfinder would work but apparently not

  Thanks for the tips

  George

  Illustrator does just not this way. It is base object of each object on its own layer of base.

  Essentially the layers panel displays layers and objects in order to have objects, layers and sous-calques. If you do not what to see objects in the layers panel, choose Panel Options from the layers panel, and check the option "show only the upper layers.

• How to change the boot sequence?

  How can I change the sequenze boot, if it is not possible to open the boot with 'F12 menu '?

  I m wondering why you can't access the start menu?
  What laptop and how Windows system you have?

  Usually, you can change the startup mode in the BIOS settings. To access the BIOS you have to press the F2 key
  But you can also press a particular button while you turn on/off the device to boot from a single module.

  For example:
  C button-> CD/DVD drive
  Key U-> USB FDD
  N key-> internal LAN

  More details here:
  http://support.Toshiba.com/support/viewContentDetail?soID=403623

• How to change the boot on Satellite 5200 sequence

  Hey, I've got laptop - Satellite 5200 901 and I would like to reinstall OS but I don't know how to operate the cd boot, always laptop run the operating system from the HARD drive.
  I would like to change boot on a CD and I don't know how to change it.
  I tried the keys F1 to F12 and I can't start the configuration of the BIOS.

  Please help me with this.

  Please try pressing the C button at the beginning upward. It will require your laptop to use CD/DVD-ROM as first boot device.

  Are you using the original recovery CD for the installation of the OS?

• How to change the boot on Satellite A10 sequence?

  Satellite A10 system.

  Try changing the boot sequence, tried various combinations
  1 / press "esc" front logo XP Monte - goes on the desktop
  2 / press "esc" and F1 for both at the same time - still going on the desktop

  Can someone let me know how (1) is supposely the instructions on the site Web of Toshiba.

  Please help summer try thw all day to enter the configuration of the Bios, TIA

  To enter the BIOS settings on Satellite A10 press ESC immediately after switching on the laptop. Press the key several times and follow the menu displayed on the screen (lower part of the screen).

  When the Toshiba welcome screen appears, you see the little symbols of bootable devices under this home screen Toshiba? He is old enough laptop model and I really remember how it looks like.

• How to edit the boot.ini file in windows 7?

  I currently have windows xp 7 and added o/s. How can I change the boot.ini file?

  Type MSCONFIG in the start menu to run the System Configuration utility.

  On the Boot tab, set your options, and the operating system you want to run.  Changes will be automatically written to the boot files.
  Click OK to save your changes.

• How to change the boot order in Windows 7.

  I have a 64-bit operating system and I'm trying to remove windows 7 and install Vista. When I press F8, I take to a screen that does not allow me to change the boot order. If Windows 7 keeps on loading and the DVD are never read. How can I change the options, then the boot order is changed and the DVD are read and I can install Vista.

  Help please.

  Hello

  Check with your system manufacturer support, their books online and ask in their forums (if any).

  Configuration/settings (BIOS/CMOS) often F2 as you start then look at the screen that will tell you how-
  the order of boot on CD/DVD drive everything first. Some systems use F12 or other keys to allow a time change
  in the boot order.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to remove the boot camp on my pc?

  I have to delete the boot camp to increase memory Mac

  As the Assistant Boot Camp is a part of Mac OS X to create a partition to install Windows, I don't really think that you really want to delete it.

  Instead, I think that you want to delete the partition that contains Windows and which is made from the Boot Camp Assistant. For instructions on reading this Boot Camp: Remove Windows from your Mac

• Satellite C850 - how to change the boot order in the BIOS?

  Hi guys,.

  I just bought a C850, and KIS2013 has made a recovery on a USB facility. But how do the machine to boot from the stylus, I can't find any way to get into the bios to change the boot order. I have been Googling all day and tried all methods I found recommended, non of which worked.

  Thanks in anticipation,

  Ray

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  You will find the possibility to enter the BIOS settings.

• How to reconfigure the boot.wim file

  Hey people, I'm trying to update my Win7 Ultimate from Vista Home Premium laptop.  However, when the beginning of the installation I get an error this boot.wim file must be reconfigured to mark 9 settings, whatever.  I did a lot of research on the web and found a file called WAIK and installed it on my laptop.  What I don't know how to use it properly.  It seems to be the solution above my head for such a beginner like me.  I guess that what I need is for someone to give me detailed instructions on what to do and once it is done where to put the file.  Just to let you know I have already copied the boot.wim from my win7 disc and the file install.wim.  I read that this file must also be reconfigured as well.  BTW, this is an original not a pirate windows disk.  Also, if anyone knows where I can just get the files already configured that would be great.  I would also like to thank the volunteers for answering my previous question.  Your solution worked great!  I don't seem to be able to get an answer here.  I clicked on the reply button, but nothing happens.  Anyway, thanks in advance for any help. I really want to do a clean install, because I'd lose data so well that I have backups I would have to reinstall to new programs too.  If you need more info, I'll be happy to offer what I can.

  You don't need WAIK (Windows Automated Installation Kit), so you can uninstall it. Run the Windows Upgrade Advisor - http://windows.microsoft.com/en-us/windows/downloads/upgrade-advisor and follow the recommendations. Uninstall your program antimalware (except Windows Defender) and run an uninstall/cleanup tool for every anti-malware program that may have been installed. List of anti-malware removal tools - http://experts.windows.com/w/experts_wiki/156.aspx and then try to upgrade.

  Jim

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/