How to change the boot sequence?

Similar Questions

• Change the boot sequence

  Hi all

  I was wondering if anyone has a guide step by step (with pictures) on how to change the boot sequence (I'm not interested by a particular brand of PC or a particular Windows).

  Thanks in advance :)

  Adam

  There are a few different ways to access a page of options boot menu at startup

  Bios legacy would use the delete key

  UEFI BIOS would use F8

  Each you could enter the bios and select the or change the first device to boot cd / dvd drive is usually first "inline"

  Some uefi bios and or install uefi, you may enter win - 10 or 8 - 8.1 and turn off the quick start first in = power options change what the button of power before you could even get into the bios because of the characteristics of secure of the two of them start.

• How to change the boot on Satellite A10 sequence?

  Satellite A10 system.

  Try changing the boot sequence, tried various combinations
  1 / press "esc" front logo XP Monte - goes on the desktop
  2 / press "esc" and F1 for both at the same time - still going on the desktop

  Can someone let me know how (1) is supposely the instructions on the site Web of Toshiba.

  Please help summer try thw all day to enter the configuration of the Bios, TIA

  To enter the BIOS settings on Satellite A10 press ESC immediately after switching on the laptop. Press the key several times and follow the menu displayed on the screen (lower part of the screen).

  When the Toshiba welcome screen appears, you see the little symbols of bootable devices under this home screen Toshiba? He is old enough laptop model and I really remember how it looks like.

• How to change the boot on Satellite 5100 sequence?

  Hello, I don't seem to be able to change the boot sequence for my 5100 satellite. I tried pressing C, F2, F12 and any other allmost touches possible.

  I also tried pressing ESC to access the bios. When I Press esc, I wonder the password that I created long time ago. When I entered the password all that shows on the screen is "Press F1 to enter normal setup" or something like that, if I have not seen to be able to enter the bios.

  Does anyone know a solution to my problem? I need to change the boot sequence

  Hi Lethin,

  I think your laptop is "Legacy free" which means that you have no way to directly access the BIOS.

  Any updates or changes to your BIOS must be made of in Windows.

  HTH

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• Cannot change the boot sequence in the bios

  Hello world!

  I use vmware fusion 3.1.1 (282344) (in fact has happened since I started from 3.0). A home edition of Windows XP is installed in the bootcamp partition and is used as the guest operating system. When I start Windows XP, it always first try to boot from the network, which takes about 1 min (this can be ignored by hitting the ESC key however). Even if I enter the bios settings, the starting sequences is not editable, where "everything on this menu is not editable in user mode. If all items require changes, consult your supervisor system"is written. However, no password supervisor and of course, I'm not using the 'user '. Does anyone have any ideas on this?

  PS: a full Linux guest OS (installed in fusion and is wrapped up as a file) has no problem to change the boot sequence.

  Best regards

  PrestonXu

  All items of this menu cannot be changed in user mode. If all items require changes, consult your supervisor system

  Weird, I never heard of this message before. You get this when you start merging, not in native mode? I would have asked if someone had made changes to the BIOS settings until you got to the virtual machine, except that you said it's Boot Camp, so I think it's less likely.

  You can try to change the boot order in the Virtual Machine > settings > advanced > boot device.

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• Satellite C850 - how to change the boot order in the BIOS?

  Hi guys,.

  I just bought a C850, and KIS2013 has made a recovery on a USB facility. But how do the machine to boot from the stylus, I can't find any way to get into the bios to change the boot order. I have been Googling all day and tried all methods I found recommended, non of which worked.

  Thanks in anticipation,

  Ray

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  You will find the possibility to enter the BIOS settings.

• How to change the boot order in Windows 7.

  I have a 64-bit operating system and I'm trying to remove windows 7 and install Vista. When I press F8, I take to a screen that does not allow me to change the boot order. If Windows 7 keeps on loading and the DVD are never read. How can I change the options, then the boot order is changed and the DVD are read and I can install Vista.

  Help please.

  Hello

  Check with your system manufacturer support, their books online and ask in their forums (if any).

  Configuration/settings (BIOS/CMOS) often F2 as you start then look at the screen that will tell you how-
  the order of boot on CD/DVD drive everything first. Some systems use F12 or other keys to allow a time change
  in the boot order.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite problem BIOS L750 - cannot change the boot sequence

  Hello reader/answering my questions.
  I am having trouble with my 750 ODN bios. This bios is an official update (3.6) from the center of support, and almost everything has been fine since (the plot thickens!). I decided one day I want to dual boot with linux, in particular Fedora (this is unrelated to this though).

  But, when I burned the disc and tried to direct (too test) boot the boot order has been on hard drive, first of all, I found! I rebooted and pressed f12 - did not work.
  I tried to delete and escape - neither worked. Then, I tried all the f keys - none of them worked.
  Whenever he took me to the Windows Start menu, and I explored it and I could not find anything.

  It is also important to mention that I'm under Win 7 SP1.
  I tried both PLoP and osloader (too boot from the dvd) - neither worked.
  I also do not remember what the button to start the bios was originally - Oops!

  Also toshiba with instructions logo never appears.
  I would really just change the order of boot however, the rest of the bios I don't need access too much right now.

  A separate issue is that Windows randomly decides he wants to check my hard drive, which takes forever, and he won't until he arrives to check it out. I think it may need medical help.

  But, no help, a qualified doctor or not, would be greatly appreciated.

  Thanks in advance
  Mitchell

  Hello

  > I also don't remember what the button to start the bios was originally - Oops!

  Pressing F2 by turning on the device could help you access the BIOS.
  But you do not need to change the boot order in the BIOS. You can do it by pressing F12. This should be done immediately after you have turned on the laptop.
  Then the start menu appears and you can choose the right boot device.

  Does it function?

• envy dv7: need to change the boot sequence in the BIOS

  I'm trying to get to the boot sequence settings in the BIOS and I forgot the administrator password. Trying unsuccessfully to Afgter 3, I get the message according to 50902428. Can you help me get?

  When asked for the password, try 45660408

• VMware Workstation BIOS 9 - cannot change the boot sequence

  I have a Windows 2003 server that has almost zero space on the C drive, so I'm trying to start a utility disk so I can I repartition.

  HOWEVER... F12 not letting me NOT select a different boot device. If I go into the BIOS and go to the start menu, I see the hard disk and not the CD is at the top of the list and there is no way to change the boot order. Up, down and '+' and '-' keys don't do. The machine is a version that compatible with 6-7, but I shouldn't have to level 9 (I think, anyway).

  The boots of the virtual machine so fast but after that everything a 100 attempts I can't else primary hard drive to boot first.

  TIA

  Kevin

  With VMware Workstation (or at least tab of the virtual machine) closed, add

  bios.bootDelay = "5000".

  to the virtual machine's .vmx file. This will add a 5 second delay for the startup process that will allow you to hit the "ESC" key to the start menu and to attach an ISO or CD image to the virtual machine. Make sure that the virtual CD-ROM presents itself as 'Connected' before proceeding with the selection of the boot device.

  André

• How to change the boot order, XPS 13 (9350)?

  New XPS 13 in front of me. I want to clean install the OS on this machine. In my XPS 15, (L502X), the BIOS has been designed so that even I was able to understand things, such as changing the boot order so that I can start off the coast a USB. But in the 13 I'm not finding it so intuitive. I'm sure it's me, but I had rather not fuss around and screw things, so I thought I would come here to ask: what are the steps to change the order of boot on this machine? Thank you.

  Recovery settings, update. Or let tapping F12 boot menu access, as soon as you restart the system. No need to start Media bios changes. Not a good idea to clean install windows on a new computer. This procedure is old technology and not necessary on new models of uefi and can cause irreparable damage. Windows and all the rest is a single image file not installed piecemeal, as years ago. You will screw things if you apply old procedures to a whole new operating system.

• How to change the boot on Satellite 5200 sequence

  Hey, I've got laptop - Satellite 5200 901 and I would like to reinstall OS but I don't know how to operate the cd boot, always laptop run the operating system from the HARD drive.
  I would like to change boot on a CD and I don't know how to change it.
  I tried the keys F1 to F12 and I can't start the configuration of the BIOS.

  Please help me with this.

  Please try pressing the C button at the beginning upward. It will require your laptop to use CD/DVD-ROM as first boot device.

  Are you using the original recovery CD for the installation of the OS?

• How to change the boot order in the BIOS?

  I have a gateway computer. I recently bought a WD My Book Essential external hard drive. It took me a while to change the setting to get the computer to boot with the connected outside of the bios.
  WD has maintained that the hard 'C' drive must be the first point for the system to look for, now it's third. I entered the BIOS and highlighted the 'C' drive, but I can't figure out how to move it to the top of the list.
  I entered both boot menu and I have the same problem, how do I move the 'C' drive to the top of the list.

  If anyone can help I would surely enjoyed it.

  genedm

  First of all, 'you' here are just a bunch of volunteers with varying degrees of knowledge and expertise - we are not Microsoft.

  The "IBA GE SLOT" is the option to start on the network.  This should be the last for most people.

  You don't need really SmartWare of WD.  It is an automated backup solution.  Once you have performed the initial backup, SmartWare runs in the background, automatically update your backup, you change files on your primary hard drive.  It's a good thing to have, but if it does not work, you can perform backups manually (or in a variety of other ways).  The important thing is to actually do the backups, however, you choose ultimately make.

  I don't know anything about SmartWare, then I can't recommend against her otherwise than to suggest that you look in Event Viewer (start > run > eventvwr > OK) application log for any errors that have come from SmartWare.  If you find something that could help you - or WD support - to understand what is happening.

  I wouldn't worry too much about a 30 second delay between the Windows startup screen and go to your office.  Now that you mention it, I sometimes feel a significant delay subjectively, but I never associated with the My Book - maybe it is linked.