How to monitor the HTTP traffic by programming?

Similar Questions

• How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  I have a virtual network adapter that is created with Broadcom.

  This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

  This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

  Someone has an idea?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to monitor the activities of internet users without using third-party software. We have some 60 windows domain user

  Hi all

  We have 60 knots which is connected with the windows domain. How to monitor the activities of internet users via the windows server

  without third-party software.

  Thanks in advance

  Alam

  Hello

  The business support, you can find forums on TechNet, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to monitor the use of the Hyperion applications

  Hi all
  We have developed a classical Planning Application in Hyperion 11.1.2
  The application is running in production mode, and now we want to monitor the use of this application, in this regard, I have following questions:
  (1) how to activate the newspapers?
  (2) how to monitor the time of connection and disconnection of each user
  (3) how to check the amount of data entered in a particular week
  (4) how to check that data are entered against how much the faculty members?

  I won't pretend to know what should I know about this subject, but I get this question of a large number of customers. So, here is my answer. There is no right way to monitor who logs and how many times they connect. If you enable the audit DATA, that you can do is to see when a user loads the data and how often they do. This does not match the connection, but planners usually don't connect to display data (which are normally made in EN or SmartView), they connect to load/update of data. With active audit DATA, you can query the HSP_AUDIT_RECORDS table, which is where the audit is stored, and see how many times the user load the data and the last load of data. Is not correct, but it is far more closely than any other method I've found.

  Example of the last connection (really last loaded data)
  SELECT USER_NAME AS 'User', time_posted as 'Last Login Time' OF HSP_AUDIT_RECORDS WHERE TYPE = "data";

  You can use a similar query to count the number of data loads.

  This would also show you what the user has launched it to business rules.

  Another option would be to enable SSAUDIT on the planning application in Essbase (this is done in the Essbase - google SSAUDIT server configuration file). This will create 2 files. The first is a file index or pointer. There will be a line for each record, via a web form or SmarView load. The second file contains all of the loaded data. The first file will tell you that loaded which lines in the second file and what time he did. The downside is that each connection between planning and Essbase uses the ID of the source of data for planning. So, it always shows the same loading data ID and will not be the real of the user who did it.

  Note that users do not have to connect through planning. They can directly connect to Essbase. All financial reports that would be misunderstood by looking only at the planning.

  If you really want the actual load, you really watch the Essbase and Essbase application log files. Would not show you users, but could show you the number of queries, the data loads, etc. You could analyze these logs in a relational table for quick access to the use of the query.

  That's a lot of things to take. Unfortunately, to answer your question, it is not a quick option, "click here."

  Utility to analyze the logs can be found at http://code.google.com/p/jrightlog.

  ------------
  Kyle Goodfriend
  http://www.in2hyperion.com

  Please be sure to assign the post as answered and answers as response or useful if others can benefit from your experience.

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• How to monitor the hard drive in labview 8.2

  Hello

  I want to use labview 8.2 program to monitor the hard drive (a folder in the hard drive) for example an application produces a result file in the folder, and then he will be captured by labview program.

  Thank you

  What exactly are you trying to watch? If the file is created? If the file is modified?

  Without resorting to some specific options of the operating system, the only thing you can do is to query file information periodically to see if it has changed. For example, the file Info feature will give you the date change. This same function can be used to check the existence of the file by looking at the error code. Actually, that's exactly what made the VI "check if the file or folder exists.

  If you want a regime more "event-based" then you can try something that is specific to the operating system. For example, on Windows, you can use .NET using FileSystemWatcher class (http://forums.ni.com/t5/tag/FileSystemWatcher/tg-p/board-id/170)

• How to fix the parse error "C:\Program Files (x 86) \HP\Digital Imaging 1 bin\hpqscbs\1033.xml?

  Original post: Parse error

  I get an error Parsing ' in the file C:\Program Files (x 86) \HP\Digital 1 bin\hpqscbs\1033.xml of Imaging.  How can I fix this, can someone help me?

  Hello

  1. have you connected printer? If Yes, what is the brand and model of the printer?

  2. Once you get the error message?

  3. you remember changes to the computer before the show?

  Method:

  Step 1: check the feature Safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine in safe mode, try to perform a clean boot by using step 2.

  Step 2: How to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

                                                                                                 

  I hope this helps.

• How to monitor the status of the application - REST

  Hi all

  I was following the blog using vCAC 6.X REST API - Part 2 - elastic sky to request a REST. I was able to post the request. It returns the response immediately after the successful presentation.   How to monitor demand? "The response of the application object has assigned to the header 'rental' property https:// < < hostname > > /catalog-service/api/consumer/requests/56428808-f9a0-4bac-b83d-ce75ddc86b78 '.

  I tried to use URLs of 'place' that didn't work.

  var requsetRest = vcacHost.createRestClient (vCACCAFEServicesEnum.CATALOG_SERVICE);

  var response = requsetRest.get ("consumer/applications/56428808-f9a0-4bac-b83d-ce75ddc86b78");

  
  

  Any help appreciated.

  
  

  Thank you
  

  I was able to get the application to the vcaccafeenitiesfinder.getCatalogItemRequest method.

• How to monitor the parameters using the Protocol Modbus in LV

  Hello everyone

  I have a problem with my LabVIEW project. I have to watch my monitor settings MI4100 Power using LV 8.5 and I don't really know how. I use the modbus RTU Protocol and I am able to communicate with the instrument, but I can't understand how to monitor records.

  I have attached my comunication VI to see what I've done. Please help me if you can.

  Thanks in advance, Sylvia

  If you work with 32-bit numbers in need of two registers, then what you already do with numbers to reach work.   Read 2 registers from 256, contact numbers, and you'll have nonexercising total power.

  If you read only 1 register, then you will have a table of 1 item.  Decimate this table and joining the numbers don't make any sense.  You'd read comes directly from the registry.

  What is the description of the error for 6002?

  I don't see any reason why you wouldn't be able to read an address greater than 30.

• How to add the name of a program in the AutoPlay menu? __In win xp, I used 'TweakUiPowertoySetup '; is there a program like that?

  Add in the name of a program in the Autoplay menu.

  Hi shayangh,

  You can use the 'default Programs editor' (third-party tool) to add / change AutoPlay entries.
  http://www.Winhelponline.com/blog/default-Programs-editor-file-association-editor-for-Windows-7-and-Vista/
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How to monitor the application connects to the journal on the unit or using slog2info w view

  I'm debugging on the device (purchased at Bell, runing 10.0.9.2372) production with the latest version of the SDK (SDK native 10.0.9.2372). I can't monitor connects using the View Log or slog2info w command described here: http://developer.blackberry.com/cascades/documentation/getting_started/tools/debugging.html

  I use QNX Momentics IDE. After you add the view "Journal of the unit", "All" is the only option in "BufferSet" and "Buffer" menu drop-down, and no newspaper appears after starting my application. The status shows "Listening target ' 169.254.0.1", pending the first event... ». Are there any additional installation required to monitor logs in this view?

  I have also tried running a SSH session and used the command 'slog2info w '. The command works on Simulator (Dev Alpha 10.0.10.263), but it returns immediately without any output on my device. The 'slog2info' command works, but it only dumps the log. I need to monitor the output log while I am debugging it. Do I have to activate what anyone on the device to make the command 'slog2info w' work, or I did something wrong here?

  Thank you

  You are following this with a devmode running app, right? In other words, not one signed?

  This has worked for you before, or is this the first attempt?

  Some few people have seen 'slog2info w' stop posting any output. A reboot or two (of the aircraft) usually "fixed."

• Re-reading the HTTP traffic to a CF Server

  It is a technical question. I recorded a bunch of HTTP traffic to my CF application do the actions I want to replay at a later date for testing purposes. These records relate to a user by logging into the application followed by the user who runs a bunch of actions. In order to read this traffic accurately I set up traffic re-read for adjust its cookies to maintain session as the session used when recording will be expired at this time there.

  This approach works very well for 1 customer or if, but when I start this scaling up to many customers, he begins to intermittently fail. The replay debugging clients who fail, I see that the server generates a new JSESSIONID cookie for each answer even if I send the correct cookie in the query. However, for a proofreading client that works correctly, I see the cookie JSESSIONID remains the same for the entire session. After a time of execution of many clients using this method CF server seems unable to accept any client proofreading. Restarting the server seems to correct this problem, but then it starts to reproduce.

  My guess is it has something to do with the internal components of the configuration of CF or J2EE session configuration. Someone with more knowledge of these applications there an idea what could be wrong?

  Well, I managed to solve this problem. It turns out that the reset of the session came from a CF error that says double Session detected. It was because there was still another variable of State management passed around the http message body called Iddm. I managed to pull this of the response from the server and send it to the following applications. This seems to have solved the problem.

• How to make the status of concurrent program error

  Hi Experts,
  
  I've written a PL/SQL package procedure, created an executable w / values for my 2 IN parameters and he attributed to a simultaneous program to the e-business suite.
  
  The specification of the procedure looks like this:
  

  PROCEDURE PROC1 (
  errbuf OUT NOCOPY VARCHAR2 ,
  retcode OUT NOCOPY NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char IN VARCHAR2 
  );

  Here my requirement is like this,
  
  How to make the status of the program contributing to the error even if the program successfully completes.
  Please let me know how?
  
  Thank you
  Suman V.

  Hello

  To give an error output, simply put the RETCODE contains 2
  To give a warning output set to 1
  for and OK output set to 0.

  If your procedure may be:

  procedure proc1 (errbuf OUT NOCOPY VARCHAR2,
  OUT NOCOPY RETCODE NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char in VARCHAR2
  ) IS
  BEGIN
  RETCODE: = 2;
  errbuf: = ' this CR WRONG because I wanted it ';
  END;

  This will give you an error.
  It may be good to your CR PLSQL like this:

  procedure proc1 (errbuf OUT NOCOPY VARCHAR2,
  OUT NOCOPY RETCODE NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char in VARCHAR2
  ) IS
  BEGIN
  RETCODE: = 0;
  return;

  exception
  while others then
  RETCODE: = 2;
  errbuf: = "an error has unhandeled."
  return;
  END;

  This way execptions generate an error.

• How disbale at the request of concurrent programs

  Hello
  
  Our environment is:
  
  Apps:R12,
  OS: Linux
  
  You must disable some unwanted concurrent requests and some games request to disable. How to disable the concurrent requests to the application, we
  
  
  and we want to run Gather stats wise scheme, so I think better to use all of the request, how we define, please let me know
  
  
  Thank you

  Hello

  You must disable some unwanted concurrent requests and some games request to disable. How to disable the concurrent requests to the application, we

  You can disable several regular simultaneous requests since the backend using the following query:

  SQL> update fnd_concurrent_requests
  set phase_code = 'C', status_code = 'X'
  where status_code in ('Q','I')
  and requested_start_date > SYSDATE
  and hold_flag = 'N'; 
  

  Note: 170107.1 - how to determine at the request of concurrent requests
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=170107.1

  Note: 152209.1 - What are the meanings of the Codes in the STATUS_CODE and the PHASE_CODE FND_CONCURRENT_REQUESTS Table columns?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=152209.1

  Kind regards
  Hussein

• How to monitor the use of the PXI UC?

  Does anyone know a way to control CPU utlization on a controller with LabVIEW PXI programmatically? I know that NEITHER had a VI owner to monitor the use of memory called rtgetmemorysummary.vi to monitor the memory usage, and I want to do the same for the CPU usage.

  If you mean a targer RT, then you can use

  RT get CPU loads.vi

  See here

  Marco