How to pass through for support staff

Similar Questions

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• How by-pass iCloud for photos of digital devices?

  I recently upgraded to an iMac 27 "new and I want to spend all my photos my old computer.  My old system was a Mac Mini that I never used iCloud on because the internal drive was small so I stored all my pictures on an external hard drive.  A majority of these photos were taken with my digital camera.  I know that you only have 5 GB of space free iCloud and my photos are much more than that.

  How can I keep my photos on my computer without them going to iCloud?  I use iCloud for pictures taken with my iPhone and my iPad so I don't want to disable this feature.

  Go on your Mac in Photos > Preferences > iCloud. There you can "download for Mac originals" where they will be offline. I hope this helps!

• How to pass skinclass for custom component?

  Hi guys, I'm moving my main application of my custom component skinClass. Here is my code, but it gave me an error saying "initializer for 'skinType': values of type spark.componets.supportClasses.Skin' cannot be represented in the text. "  I don't know if it is possible to do. Any thoughts? Thank you very much.

  hand. MXML

  < components: loginPanel id = "loginPanel" horizontalCenter = "33" "-15" = Red

  skinType = 'skins. CustomPanel.

  loginButtonClick = "loginpanel_loginButtonClickHandler (event)" / >

  component loginPanel

  script

  [Bindable]

  public var skinType:Skin;

  MXML

  < s:Panel cornerRadius = "5".

  ID = "loginPanelComp".

  "32" = x y = '8 '.

  width = "373" height = "200".

  title = "sign in".

  skinClass = "{skinType}.

  >

  ...............

  < / sign >

  You try to pass a string to match the value of a class. SkinnableComponent skinClass property is a style.

  You must use styles css, or if you want to set this runtime do something like

  private var _skinRef: Class;

  public function set skinClassRef(value:Class):void

  {

  _skinClassRef = value;

  If (loginPanelComp)

  {

  loginPanelComp.setStyle (skinClass, skinRef);

  }

  }

  C

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• How to record on the mixing in mono, 0 db reduction in volume in mp3 64 bps? Sounds simple, but about all the support staff has been able to do.

  How to save on mixing in mono, 0 db reduction in volume, (same volume as in the files-no - 3 dB reduction) to MP3, 64 bits/s? Sounds simple, but about all the support staff has been able to do.

  Several solutions to this problem.  I think that we have discussed on the support email, but I will share this new here so that he can help others as well.

  Firstly, as I have explained in the e-mail, default, hearing support right Pan that prevents content mixed to a stereo field centre to be stronger than the same worn out content far left or right.  This provides one - drop 3dB to center the content by default, but you can disable it completely by entering Preferences > multitrack and by setting the Mode panoramic default to left/right cut (logarithmic)

  

  Now, when you create a new multitrack session, there is an option to specify the captain multiplexing.  Here, you can select Mono, stereo or 5.1 and it will be the mode of multiplexing by default for a mix of base operation regardless of the content of your video, but can be overridden when you export a mix of session.

  

  Then, if you choose the menu item multitrack > Mixdown Session to the new file... always by default is the captain of multiplexing.  This command does not write to disk, is a not preview or pre-processing.  If you want to export your mix multitrack session directly on the disc in the desired format and multiplexing file, use the command file > export > multitrack mixer > whole Session... You will have then the full set of output options, including the entire line output option that you like and the format you prefer.

  

  Here, I have disabled by default 5.1 output and selected a Mono mix instead.

  

  I've now changed the parameters of format as well as MP3, 64K.

  With most of these configuration details, you only need to define their time and they will remain the default values for subsequent projects, except change again.  The dialog box export a multitrack mix will reset the mix options to match the default output and the MP3 settings can be updated to reflect the closest Kbps setting of the sampling frequency of your session.

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• Where can I find a driver for the SM bus? It is not available through HP support.

  I have a laptop Compaq Presario V5120NR. My operating system has crashed and it was not recoverable. I ourchased a copy of Windows XP Home Edition and installed it. It is the same OS that came on the phone. I downloaded all the drivers available through HP support and installed them. Device Manager still shows that I have not installed driver for the SM bus. The laptop works, but has a few "quirks", such as the screen saver turns on, but then turns off for no apparent reason. No problem, just annoying little things like that. Any idea where I can get the driver for the SM bus would be greatly appreciated :-)

  This driver does not cover my graphics device (Raedon Express 200 series). However, the information you provided gave me the insight to solve my problem. Uninstall and reinstall my graphics driver solves the problem. And so far, no more "quirks". Thank you very much for the help.  :-)

• How to check if device supports for wifi or not?

  Hello

  I want the code for the wifi and mobile network... If wifi is available then want to go throgh wifi (= wifi interface). How do I know peripheral support for wifi?

  Take a look at this article.

  How to determine if a BlackBerry smartphone takes in charge the features Wi - Fi which is-

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/832062/How_To _...

  Concerning

  Bika

• How to navigate through the file to the blackberry playbook using Tablet blackberry OS for Adobe Air SDK

  Hi all

  How to navigate through the file to the blackberry playbook using Tablet blackberry OS for Adobe Air SDK.

  And also I want to download this file on the server.

  Help me by providing examples of coding.

  Thanks in advance.

  With respect,

  Sébille C

  Here are some tips to help you get started.  It all depends on the terms that you use for your search.  For the first, I would use "adobe air browse file."  For the second, I start with only a variation as "adobe air download file" and then adjust according to the first results.

• Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

  Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

  Hi michaelk66089044,

  You can open it from Adobe Acrobat DC application on the file menu > open. If you did request by default option to open the PDF, you can directly click on PDF.

  You can also right click on PDF and select open in Adobe Acrobat DC

  For help on PDF edition, please see this KB doc: using Acrobat | Edit PDF files

  Let us know if you need help.

  Kind regards

  Meenakshi

• I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

  I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

  Acrobat 9 (and 8, of course) is not compatible with your operating system.

• I was buy images of Photo of Dollar. I received this offer. Promo.99 by image through an annual plan of 10 images for9.99/month. How can I register for this offer?

  I was buy images of Photo of Dollar. I received this offer. Promo.99 by image through an annual plan of 10 images for9.99/month. How can I register for this offer?

  I forgot to say that this offer is through Adobe Stock.

• CS6 bought and downloaded for Windows, but now have a Mac. I have the disk to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account. It is not listed under my orders on my account

  CS6 bought and downloaded for Windows, but now have a Mac. I have the disc to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account? It is not listed under my orders to my account, so I can't do it this way.

  Hello

  You can access the link as follows and download the installer for CS6 products and activate the product using the license key of series.

  Download Creative Suite 6 applications

  Thank you.