How to perform the reset operation after an operation?

Similar Questions

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• I'm trying to digitally sign a document, and I can't find my password. How to perform a reset on my PC

  I'm trying to digitally sign a document, and I can't find my password. How to perform a reset on my PC?

  You have not, you will need to create a digital ID or remember the password.

• How to stop the abandoned operation messages for the opening of the games on Facebook?

  Original title: how to stop the abandoned operation messages

  When I connect to my facebook and began to open the game or any game I get this error operation failed and it want start the game... I can open facebook and update the games, but it won't play...

  Hi Annspikes,

  1. what browser do you use?

  2. This only happens with Facebook game?

  3. you remember to make changes to the computer before this problem?

  If you use Internet Explorer, you can read the following article and check.

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  Hope this information is useful.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Cannot send photos "there are no associated program to perform the requested operation."

  original title: Windows live mail

  I configured my gmail account in my windows live mail client. yesterday, I tried to send e-mail from the same gmail account to a friend, mail is sent successfully. but they were not able to open the images. I tried to view the slide show on my computer, then I got the error message "requested action cannot be performed, there is no associated program to perform the requested operation" then I tried to download the same images again, I got the same message. I tried to change the extension of all formats of image (for example, .jpg and .jpeg) but still, I had the same problem of association. I tried to change the registry because I had the article on the microsoft Web site, also I did system restore and reinstalled WLM also. HELP PLZ

  Hello
   
  1 have. what article you tried?

  2 is the issue limited to Windows Live Mail?

  3 is the issue limited only with a specific file extension?

  Check out the following and check:

  Method 1:

  Step 1:

  Try opening the file in the Windows Photo Viewer and check if you are facing the issue.

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Step 2:
   
  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  This option allows to choose which programs you want Windows to use, by default.

  If a program does not appear in the list, you can make the default program using set Associations.

  1. open default programs by clicking the Start button, then programs by default .

  2. click associate a file type or Protocol with a program.
  3. click on the file type or protocol that you want the program to act as the default value.
  4. click on the program of change.
  5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programs or your program is not listed, click Browse to find the program that you want to use and then click Open
  6. click on OK.

  For more details follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2:
  Try to create a new user account and check if you have the same problem.
  To create a user account
  1. to open user accounts, click the Start button, click Control Panel, click user accounts and family safety, and then click user accounts .
  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on to create a new account.
  4. type the name you want to assign to the user account, click an account type, and then click on an account.

  For more information follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in the new user account, the user account may be corrupted.

  To fix the damaged user profile, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If you are facing problems with Windows Mail, I suggest you according to the query in the following forum.

  http://answers.Microsoft.com/en-us/windowslive

  Hope this information is useful.

• My sfc/scannow got stuck on checking 100% and then he said that he was unable to perform the requested operation. slow startup

  Hello

  I noticed a couple of days my laptop took a start-up and initialization time. its about 10 minutes. Once his work, it seems almost fine, sometimes a slow lttle with programs saying does not for a while and then they do it.

  I tried to run a sfc/scannow twice and each time he's stuck at 100% full audit. Thus, the first time I have waited a long time, looked at the Task Manager and saw that it was inactive closed it. the second time I waited a long time and he said: windows resource protection could not perform the requested operation.

  What should I do?

  I try to reinstall windows 8 all together and start over.

  Please help me!

  Hello

  You can try the following article instead:
  http://www.kapilarya.com/fix-do-Inbox-Corruption-repair-using-DISM-in-Windows-8
  It generally a better method than the System File Checker.
  Hope this helps, good luck :)

• How to perform the customization & personalization in ADF? Any body set good example demonstration...

  How to perform the customization & personalization in ADF? Any body set good example demonstration...

  Hello

  If you want to know the customization & personalization demo, you go through the following link...

  Oracle JDeveloper 11g Release 2 tutorials - customization and customize an Application

  I think that his may be useful for you.

  Thank you

  MAGO

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How to change the language in after effect

  How to change the language in after effect

  Start here.

• How to check the internal operations, Manager of competitor status in Oracle Apps R12 of en

  Step by step how to check the internal operations, Manager of competitor status in Oracle Apps R12 of front end and how to start their.

  Richa says:
  Step by step how to check the internal operations, Manager of competitor status in Oracle Apps R12 from front end

  Simultaneous treatment - platform generic competitor Manager Questions / answers [ID 105133.1]

  and how to start the

  (1) using the adcmctl.sh (from the backend)
  (2) using the button Activate (from front) - http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248

  Thank you
  Hussein

• How to make the paper dirty after update links?

  Hello

  I use the code to update the link between resources by providing new URI below. The relationship between resources are updated, but the document is not become dirty.

  InterfacePtr < ICommand > updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));)
  UpdateCmdData InterfacePtr < ILinkResourceStateUpdateCmdData > (updateCmd, UseDefaultIID());

  updateCmdData-> SetResource (REF.) GetUID());
  updateCmdData-> SetDatabase (REF.) GetDataBase());
  updateCmdData-> SetNotify (true);
  updateCmdData-> SetUpdateAction (ILinkResourceStateUpdateCmdData::kUpdateURI);
  updateCmdData-> SetURI (newURI);
  updateCmd-> SetUndoability (ICommand::kRegularUndo);
  CmdUtils::ProcessCommand (updateCmd);

  How to make the paper dirty after update resources?

  Thank you

  Use PreDirty(); before your change.

• How to: perform a reset of the ink system

  When ink troubleshooting related issues, be it an error of cartridge of ink or the impossibility to print one multiple and certain or colors, one of the first steps to try is a reset of the ink system.  This resets the system of ink in the printer and get rid of all the false errors.  I will outline the steps below.

  Perform a reset of the ink system:

  1. While the printer is on, remove all printer ink supplies.  This includes all the cartridges and printheads, if it is removable.
  2. Unplug the printer from the power source while on and no ink in the printer supplies
  3. Get a clean, lint and clean water
  4. Use the cloth and water to wipe the electrical contacts of the cartridges, the contacts inside the printhead for cartridges, the contacts on the back of the printhead that connect to the printer and the contacts in the printer that connect to the print head
  5. Wipe the contacts so that the water is in/on the system
  6. Plug the printer back to the power source, without ink supplies
  7. Insert the print head when the printer turns on and shows the printhead is missing
  8. Insert the print cartridges when the printer indicates that the cartridges are missing.  Do one at a time to ensure that the error is not from one of the cartridges.  The upper part and insert the first cartridge, and then close the top.  The front of the printer should, then, indicate that the remaining colors are missing.  To do this individually with all the cartridges.
  9. Once the print head and cartridges are installed, then the printer will attempt automatic alignment.  Once the alignment is complete, reset/Reset ink system is over.

  If the error or problem continues, then move the additional steps in the document troubleshooting for this issue.  This is just the first step to help clear false errors that may be present.

  Hope it will be useful for anyone who needs to perform this reset.  Good impression.