How to prevent spam and the dating of the queries

How to prevent spam and dating asking to come in my junk mail too much looking forward this junk e-mail

If the emails are from the same source or have a constant content, you can write a rule in Mail/preferences/Rules. Example below.

Tags: Mac OS & System Software

Similar Questions

  • How we prevent firing from the files of research project

    So I have a lot of project files to get. Great... a library of content.

    I did two TOCs... OCD from some of the files in the project files... and the other OCD to take other project files.

    Ditto for the index. Two different clues... pulling select project files.

    When I got out, the table of contents and the Index of reference good project files. However, the search takes from the project files that are not in the table of contents and the Index.

    How can I prevent search to all project files?

    That is not how it works.

    HR starts by including all subjects in a build. The fact that a subject is not in the table of contents does not necessarily mean that the author doesn't want in the project, so includes it HR. In the same way, a topic that is not indexed gets included. I want that all my subjects but I want that all the indexed.

    To exclude topics you use conditional tags build and build Expressions. Say so you released has and output B and the two are mutually exclusive. Apply tags to output A and output B and when you build using, you create an expression such as NO output B. That will exclude the output B headings so that you get the topics for output A.

  • How to move pictures and the catalogue of a new external drive on a Mac?

    I found this question several times and do not understand the answers.  I have all my photos and the catalog LR on an external HD.  I need to move to an external drive more.  I tried with the Finder, but when I try to open the catalog on the new disk the pictures do not show in LR even if they are on the disc.  In a few simple steps how to do this correctly?

    Assuming that the new disk is writable,

    Open the catalog.

    Go to the folders Panel.

    Do a "find missing" on the top-level folders so that LR will know where the files have been moved to.

    Adobe Lightroom - find moved or missing folders and files

  • How to prevent overheating on the Equium A60

    My laptop is about 2 years old and overheating after around one hour use and automatically stop. Is there something that can be done to help solve this problem?

    Yes, you can try to clean the cooling modules. For the most part a dust and debris are responsible for the bad air circulation and thus overheating laptop.
    I use the vacuum cleaner to clean my laptop fans, but you must be careful!

    One of my friends used the vacuum cleaner and the fan was too bad because the suction pressure was strong!
    So you can do so at you own risk or you ask a technician for laptop for assistance


    Remember - this is a public forum so never post private information such as numbers of mail or telephone!


    • You have problems with programs
    • errow message 0x810000ed
    • Recent changes to your computer
    • What you have already tried to solve the problem
    1 are you using the backup and Restore Center or any other tool to save the files?
    2. when exactly you get this error code? It's when you launch the tool, or when executing backup?
    We have checked for the error code you provided and not found any information about it. We recommend that you check the error code to see if it is correct. Many users have fixed the problems of file backup by following these steps.
    Step 1: Check the status of dependent services backup.
    1. Click Start, type services.msc and press to enter.
    2. from the list of components, double-click Backup Windows and Volume shadow copy services.
    3. make sure that the startup type is automatic and the services are started.
    4. apply the settings.
    Step 2: Check the hard drive in order to correct mistakes.
    1. Click Start, type cmd, right-click cmd, and then click Run as administrator.
    2. at the prompt, type chkdsk /f /r and press to enter.
    3. once the scan is complete, close the window.
    Step 3: Start the backup.
    1. click on Start, backup and restore, the list right click on backup and restore, then click on run as administrator.
    2. try to create a backup and verify the result.
    Post back with the results, so that we can help you further.
    Kind regards
    Answers from Microsoft supports the engineer.
  • How to pass values and the development of a movieclip to another


    I created a few dynamic movieclips.

    When I click and hold on one of them, I want another library bound MC to appear and the new MC must be movable.

    I can do the new MC appear, and I can make it draggable.  However, I am a bit lost when it comes to tell Flash to forget the old clip and make the new one "online".

    In other words - after a click-hold, I want the new movieclip to be mobile without the user to mouse to the top and then click on new.

    Thanks for your help.


    If you are using AS3, when you click down to just create the new instance, preferably directly aligned to the top of the object you clicked on to the bottom, then use startDrag (false) on it. Something like...

    clickedMC.addEventListener (MouseEvent.MOUSE_DOWN, createNew);

    function createNew(evt:MouseEvent):void {}
    var newMC:MC = new MC();
    newMC.x = clickedMC.x;
    newMC.y = clickedMC.y;
    addChild (newMC);
    newMC.startDrag (false);

  • How to remove fields and the form space occupy a form before printing

    I have a dynamic form that should display only portions depending on the check boxes (if the box is checked, impression paragraph; if not, do not print). I use javascript to change the visible paragraph form to hidden before printing. I would also like to eliminate the white space when I do the hidden point. In other words, I want to reduce the PDF based on the entered user boxes. Someone has a simple solution? I am using LiveCycle Designer 7.1.

    The paragraph that you want to hide and the object below, should be included in a subform that has the value content: flowed.  This will allow all inside this subform back when an object is hidden.  If you set the content of a positioned subform, it places objects in the exact location you specify when you design the form, whether other objects are visible or hidden.

  • I'm trying to learn how to use the "Add spamming" and the "list of Manage spammer" but can not find any reference material?

    I need to learn to use correctly the spammer 'Add' and 'Manage the spammer list' functions and can find no documentation/explanation of these functions. Sites I list with the function "Add spamming" keep coming in my mail box.

    Thank you for your help

    Use the built-in junk e-mail filter Thunderbird.

  • How it prevents illustrator of the conversion of the shadows at the edges when the file is closed, and then reopened?

    I have no idea why this is happening but you must stop. I can't change the shadows in Illustrator files once they are reopened. I don't have time for that. Help, please.

    What is a file originating with an older version, as it is being edited in CC? Try record underand don't forget to save it as the current version.

  • How we prevent ads and video unwanted play when visiting Web sites.

    A few sites of news, but also other sites I visit have ads and nothing to do with boxes of video on the margins of the page which start automatically download and play when the page opens. How can I prevent them from loading and play? I am on limited bandwidth and they eat in my monthly allowance.
    Thank you.

    Adblock more {web link}
    Blocks annoying video ads on YouTube, Facebook ads, banners
    and much more. Adblock Plus blocks all the annoying ads, and
    supports Web sites by blocking is not discrete (configurable) default ads.

  • Satellite C850 - how to prevent breaking easily the VGA port


    Our school has recently made 20 portable Toshiba L850 and computers C850. As most of the staff allows to connect to his projector VGA port, VGA The port must be strong.

    In recent days, we have 3 laptops with the Port VGA brought away from the laptop! just one thumb on the cable when connected breaks this port, and we cannot get a Toshiba repair, because it's our fault. Fixing this problem will cost us an entirely new Mobo that will most likely cost to buy a new laptop.

    All solutions on how we can prevent the VGA port to stop so easily? There are no screws to screw the VGA port, unlike all of our older laptops that do not break and lasted much longer than 7 days...

    It is not easy to write something about it, except to say when you remove or disconnect VGA cable do slowly, gently and may move slightly left/right.
    I put t know if this is a design flaw. I think that everything is tested until it goes to production.

  • Audition 3.0 how to disable ASIO and the default Sample Rate recording?

    Hi people,

    New here, but I hope someone can help me with a few questions, I'll have with Audition 3.

    Firstly, some background questions.

    I use hearing parallel to a broadcast audio broadcast program called SpotOn,

    This software requires that I run the sound card, a RME Madiface XT in 48 k mode, and that all the outputs that it uses are defined as WDM Windows so that the windows kernel mixer can control them.

    This means that when I use the hearing at the same time, I have to configure it to use the "Audition 3.0 Windows Audio" driver to stop him from taking control of the sound card directly and change setting which prevent SpotOn to see its output.

    The problems I encounter are that hearing itself seems to randomly change mode in the edit window ASIO driver, I suspect that this happens when I import audio data from a key which is from 44.1 to modify for use in SpotOn. This often seems to not only make the outputs of the card its invisible to the windows kernel mixer but also change the sampling frequency of 44.1 sound card and stops work SpotOn.

    The second question I have is that the sampling frequency of default record when I record in edit mode is always 44.1 and if used it again change the map sound 44.1 and causes the same problems, I'd be very keen to know how to change this default to be 48 k if possible.


    What I ultimatly looking is...

    1. a way to disable the ASIO drivers in hearing so that it is not only this option is available, and cannot use the Audition 3.0 Windows Sound Drivers.

    2. a way to make the sampling rate 48 k to stop people choosing 44.1 mistakenly when saving default record.

    Any help or advice that anyone can give would be much appreciated.

    Thanks in advance for your comments

    What other pilots ASIO sees your installation of 3 AA? If it's the Madiface one and you use only WDM drivers you can just uninstall the ASIO RME driver?

  • How to prevent echo over the noise reduction

    I had a dickens of a time trying to find how to reduce the echo that remains after the removal of the background noise. However, I do not give to the top and after playing with some of the settings, I believe that I thought about it! I use Adobe Audition CC (6.0). You'll want to follow the steps below as a means of noise reduction, not after it. So we prevent the echo over the noise removal, do not get rid of it... if that makes sense. Then, start with your original audio with noise, then...

    1. Perform normal selection of background noise and sampling procedures, it (SHIFT + P)
    2. Select all audio data (CTRL + A).
    3. Prepare to apply the noise reduction: Effects > restoration/noise reduction > noise (process) or CTRL + SHIFT + P
    4. In the window that appears, I played a bit with the three parameters (see image below):
      • (85%) noise reduction slider
      • Reduce by slider (approximately 40 dB)
      • In the "Advanced" section (you may need to click on the small triangle/arrow to decompress), the spectral decomposition rate (10%). It is this final setting that makes a HUGE difference!
    5. Put audio on the loop if it is a small clip and click the play button to hear a sample of the noise reduction applied.
    6. Adjust the three above mentioned settings until you get the desired effect.
    7. Click 'apply '.

    I hope that helps!


    Can I make a suggestion?  Although you're experiences were useful, trying to find a unique size of the entire solution "one pass" probably doesn't give the best results.  Basically, if you hear NR artifacts (the quality that you are referring to) any point you made too much noise reduction only once.

    As a general rule, you're better off doing 3 or 4 passes the very slight noise reduction, entering a new sample of noise each time.  For most 'normal' noise, it can also be very useful to increase the size of the FFT (in the Advanced menu) a parameter preset or so before grabbing each of these sequential noise samples.

  • Used Firefox help too get answer how to uninstall "Babylon" and the "tab" continues opening each time, Firefox is started

    Every time I open Firefox I get 2 tabs opening - homepage and help of Firefox with the parameter "I want remove Babylon Search... ». I needed this information, 1 week ago, to remove the "Babylon" search engine that came after trying to install a .pdf conversion program. The search engine is not running, but keeps opening the page of Firefox help with the issue.

    You may accidentally added that page as a second search results homepage - Firefox allows multiple pages as home page.

    You can check here:

    Orange Firefox button or classic menu Tools > Options > general

    As mentioned in the article How to set the home page, the second URL would follow the first one after a "pipe" (or vertical bar) character (|). You can find something there?

  • How to prevent activation of the application switcher function the central button of the mouse

    I use a mouse third with a scroll wheel (button 3) as the central button of the mouse.  How can I prevent this activation of the application switcher function button?

    System Preferences > mouse allows you to assign actions to the buttons on the mouse. Some mice come with their own drivers/preferences.

Maybe you are looking for