How to put a spot PSD file?  DCS works very well...

Similar Questions

• can't see MP3 disc on the CD/DVD drive - I just see it file and no disc displayed. There is no error message; all other disks, file types work very well!

  And I already tried the MS Utility to solve this problem.  She could not do - he asked me to insert a readable disc (when he could not see the MP3), so insert another disc that was readable.  Completed the "patches" then the last section inquire whether or not the problem was resolved in effect, I answered no.  I did have success as a result of the Microsoft community' suggestion that he left me with.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  You have this problem with just this one CD?

  The CD may be damaged or dirty. Some readers may handle these CDs better than others, so it is perfectly possible that a player can still play the CD, while others do not. I suggest that you create a new copy of the CD on an other machines it can still be read.

• I have the UI which downloads the file in file multiprt transfer in chuncks. It worked very well in a previous version of firefox, but now ajax calls gets abandoned?

  I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.

  Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• I'm now 95 updates cumulative failure (80070643). These failures always me directly to make sure that ose is running. OSE works very well. How to update?

  I'm now 95 updates cumulative failure (80070643).  These failures always me directly to make sure that ose is running.  OSE works very well.  How to update?

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  and/or

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  TaurArian [MVP] 2005-2010 - Update Services

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• My VB2013 exe will not run the Task Scheduler but works very well for direct click in Explorer as well as a BAT file.

  The program is configured to run from a direct click using a text file specifying where the source files and destination.  Worked very well for a direct click or from the. BAT file.   It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active.  But while it freezes.  He reads the spreadsheet looking for specific elements then output to a CSV text file.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to approach

  At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?

  reset your preferences -: https://forums.adobe.com/thread/526990

• I reently installed Windows 10 and had to re - install Photoshop CS2 Version 8. It works very well but he says it's a trial version how to activate it?

  I have recently installed Windows 10 and had to re - install Photoshop CS2 Version 8. It works very well but he says it's a trial version how to activate it?

  You can not activate Photoshop CS2 as long as obsolete Adobe product activation server. Instead, you will need to download a special version that uses a different serial number, and does not need activation. Note the serial number to the right of the product name. Your existing serial number will not work

  Download Acrobat 7 and CS2 products

  Hope that helps.

• How can I get the .psd files to overprint in Illustrator cs5?

  Hello

  I have a client Illustrator file.  It has a placed image .psd (flower) and they did an another psd file as a strong support of the form even color of the flower psd. The solid is where a spot vanish will be printed on top of the flower.  How can I get the solid spot psd to overprint so that I can make a single pdf with all 4 color an tone?

  Thank you

  Thanks for the input guys.

  What I could do was select the image in Illustrator, make vectorization, remove white background, complete with the image with the color of the task vanish and place it to overprint.

  The goal was to get a pdf file that included the four colors and spot varnish without anything to be eliminated.

• How to fix the damage psd file?

  Hello!

  My computer crashed today while photoshop CS5.1 economy/write in a psd file. When I started my computer to the top and tried to open it again, it displays only 1 layer shown as a corrupt image (as shown - red in the Image below). When I click on the file in the window 'Open' (The Gray Image below), the psd is displayed correctly in the preview window, but does not display correctly when opened. Help, please...

  Open it, and then under file > file Info, make sure it is not a code there that shouldn't be there, then he re-record as .psd or .tif

  Do not click on strange links that may be present (although sometimes there links to copyright in the field of copyright which are legitimate identifiers.)

  Sometimes, when I get questions like this, and there is nothing in the actual file information, this may mean that there is something in the code of the actual image. Then I opened in GraphicConverter and save as .tif or .psd. It clears sometimes upwards.

  A .jpg file is not a page layout format. Quark hate them. Never had any problems in Indesign with them but they are compressed.

  Also read comments on the sites below:

  df87/how-do-i-recover-PSD-files?Forum=itprovistadeploymenthttp:// https://social.technet.Microsoft.com/forums/Windows/en-US/b826785a-3b69-4e63-ac62-fabec7e3

  http://www.filerepairforum.com/Forum/Adobe/Adobe-AA/photoshophttp ://