How to put this video on this TV?

Similar Questions

• my lap top is stuck on safe mode how to put this right

  my laptop is stuck in safe mode how to put this right

  Hello

  ·         When the issue started?

  Follow these steps and check if it works:

  a. Click Start, type msconfig in the search box and press on enter.

  b. Click Start, and then in the start option, check if the startup is checked.

  c. If it is checked, then please uncheck.

  d. then click general, select Normal startup.

  e. click on apply and then click ok.

  f. system prompts you to restart, please restart the system.

• How to put this? And what is it called? (TEXT)

  Hey guys I want to put this question to one of my videos but I don't know how. Should I design it on Illustrator and then put it on? Or is there some pre-made.

  In addition, how this company called?

  Thank you very much

  

  His name has the third lowest

  You can design and build in the Titler, Photo Shop, Illustrator etc... as long as make you with an alpha for the BG video section

• [CS5] [JSX] How to put a video from a URL

  Hey everybody,

  I found a great help in this forum in the past, so I hope that someone can help me this time.

  I use Indesign CS5 on a mac. I write in Javascript.

  What I'm trying to do it dynamically puts a video from a URL.

  I thought I could do this by adding a rectangle, then instead of the rectangle a film and finally add the URL.

  It does not work. I'm lost on how to proceed.

  Here is the code that I hoped would do (just the relevant lines from a bigger script)

  myDocument var = app.documents.item (0);

  myPage var = myDocument.pages.item (0);

  frameVideo = myPage.rectangles.add ({geometricBounds: [0, 0, 144, 144]});

  onlineVideo = frameVideo.movies.add ();

  onlineVideo.url = " " http://www.meffect.nl/rocvideo/91870.MP4 ";

  When I run this script, I don't get any errors, but the video in the URL is not loaded.

  Can I use something like

  onlineVideo = frameVideo.place (URL ("http://www.meffect.nl/rocvideo/91870.mp4"));

  It doesn't work anymore!

  I hope that this is at all possible... I think it is, as you can do it manually in InDesign too.

  Thanks guys,.

  Michiel

  Hey guys,.

  I just arrived at the office after a good night's sleep, so I thought, let's give it another shot.

  For some reason any my code works now. This is exactly the code I posted yesterday.

  I have no idea why it does not work then, but it works now.

  Weird, but I don't mind as long as he continues to work

  Thanks anyway!

  Michiel

• How to put two videos to play simultaneously on a PDF file with a common play button

  I know how to put videos on a PDF file. I'm looking for ways to have a common control button.

  I want to be able to play the files simultaneously and wind/return them as simultanousley.

  @markerline - this has nothing to do with InDesign.

  @Maesumi - you can send multimedia orders links and buttons in a PDF file. These include the ability to play, stop and rewind video annotations.

  Add two videos for the PDF using Acrobat Pro, and then create a button. Click on 'all properties' button 'actions' tab, choose "mouse up" and "multimedia operation Acrobat 9 and later versions. Click Add, and then select the first video and the operation to perform. The closure of the pop-up window, press Add and select the other video, more of the same operation. This stack two actions on the button. Repeat the process to create buttons play, stop, etc. According to your needs.

  The same thing can be done with a link, by choosing the type of "personal" link to open the dialog box actions.

  Note that with the widget video by default, you cannot bind controls playback bar in videos. This is only possible with a custom widget and some scripts.

• How to put a video on santa e260?

  I bought a santa e260 version v03.01.11a of my friend and I have been trying to put videos on it but I don't know how to convert the files and what im supposed to convert two? or what im supposed to use program? Help, please

  It is good that you updated the firmware of the original, which was delivered without the option to change from MTP mode MSC USB. Congratulations on appearing on this procedure. Many who do not have as here.

  As far as videos go, yes it is possible but different people have different levels of success with different methods. I would say going through the Sansa Media Converter Board. You will find all kinds of advice, assistance and recommendations for converting videos to play on your Sansa e260. You will also see what was not working for the people or the problems they faced.

  If you decide to use the Sansa Media Converter, it is almost guaranteed that you will need to convert the video source to a different format with another converter first. Then the MSC will be the final of the conversion and transfer of video to your player. There are many other free programs that work; You'll just have to see what works best for you.

  Since you have a v2 device that uses the same processor as the replacement of the "rocket", you can also try Video4Fuze or FuzeVidz, conversion programs that have been written by the members here to simplify the video conversion process and eliminate the need for MSC in total.

• I need an idea how to put several videos on one page

  Several videos on one page in Muse needed of a portfolio of video...

  Someone at - it an idea how this can be please. (or point me to a tutorial link - one is all that I can find)

  I'm happy with either integrated or Menu related objects for videos.

  Hosting YouTube videos

  I can't find a way to put hyperlinks or URLS into objects and I can't find a way to make small video players in Muse.

  If I resized the container... things look very weird. for example, the video will tiny and in a corner.

  I feel that I work with half a Toolbox!

  I can not even find a model where this has been done.

  Any help is appreciated. Thanx.

  Hello

  You can use a widget of composition for this purpose.

  Place the widget Youtube library widget within the 'target' of the composition and resize both the objective and the widget youtube according to your wish.

  Kind regards

  Rohit Nair

• How to put a video Clip on the scale and avoid the deterioration of the Image?

  Hi, I'm trying to determine the best way to put across a number of videos in my sequence, so that I can ' digitally zoom "on the action and again, we hope to avoid degradation of the focus/sharpness of the image.

  My concern is that using the Scale-up effect, is to distort the images, that is stretching the pixels.

  (one of the clips that I tried to use the scale effect appears blurry and distorted, but it could have been a problem of automatic update, I'm not sure).

  Here are the details of my installation.

  I'm under PP CS5.5 on Windows 7, and I have a card Nvidia CUDA.

  I shot the video on a Canon Vixia HF/S21 in 1920 x 1080 p at 24 Mbps (Canon calls this MXP and the 'p' is not native, is "drop-down" menu inside the camera).

  My output will be h.264 for the web. I'm fine with the dimensions of the output at 1280 x 720. The output doesn't have to be 1920 x 1080, BUT it would be nice IF I could the 1920 x 1080 output while keeping the image sharp and vivid. If 1280 x 720 gives better results then I'll do it.

  So my questions are the following:

  (1) using the scale effect PPCS5.5 result in a distortion of the image

  -It causes the image to get blurry, less sharp/crisp?

  -(I'm scaling the clips of 50-70%)

  (2) is it interesting to define the parameters of the sequence at 1280 x 720 (instead of match clips at 1920 x 1080)?

  -My thought is to set the parameter sequence to these Dimensions of lower resolution and I can get a 50% scale upwards by simply * not * using 'Ladder to the chassis' on the clips I want 50% furred.

  If you shot 1080 and 720 is finished, allowing some flexibility to scale.  PR calculates scale in two ways, which is very confusing.  If you set your sequence on 720 and preferences to the default scale to the size of the image, all the clips in 1080 you will add later will show 100% in control of the effects > tab, movement, even if the Pr has put across your footage in 1080 at about 45% to frame 720.

  I suggest you uncheck default scale to the size of the image.  Then, when you add your 1080 videos to your 720 sequence, it will be scaling to 100% (for real) and it will be bigger than your raster 720.  Only by doing so you know if you climbed your film beyond 100% when you are panoramic and analysis later.

  Your first clip to meet the sequence, copy and use attributes to paste on the rest of your clips in 1080 to bring to the 720 frame scale to the bottom of the scale.  Then you can make adjustments from there.

  BTW, there is an article on the Adobe site how the CUDA scaling is greater than Ps and Ae scaling.  Maybe someone can find the link or you can search the site from her.

• Satellite L300-1AI - how to put more video RAM?

  Hello

  I struggle a bit with the graphics card.

  I bought GrandTheftAuto IV, and although it runs, it runs very slowly. The cause for this is that it uses only 124 MB of video ram.

  I went to the site of intel to learn more, and it turns out that toshiba will set up my video ram before sending it.

  http://www.Intel.com/support/graphics/sb/CS-029090.htm
  (about 1/2 down, titled: can I increase the amount of memory graphics using my computer is?)

  Y at - it an option for me to set up a little more ram on the graphics card?

  Because at the moment, if I will:
  Desktop computer - make a right click, customize, display settings, advanced settings
  Get the type of adapter and information.
  Its a Mobile Intel (r) 4 Series Express Chipset Family
  1341MB available total graphics memory
  128 MB of dedicated video memory
  Video 0MB system memory
  1213MB shared system memory

  The quesitons I need to answer: why vista/intel usually allocate more video memory it is necessary. GTA IV seems not to be allowed to see the dedicated video memory.
  And then, how can I say vista/intel to allocate video memory dedicated more or maybe video memory system?
  Dynamic video memory allocation thingy seems to not work very well.

  I have already been in the graphics media accelerator driver and changed the 3D, of Normal driver memory settings to high.

  Concerning
  Ollie

  Normally the video RAM is switchable dynamic and you can t change.
  What you can do is update your RAM and then you will have more video RAM.
  However, you should not change the video RAM. Get this s automatically.

  On GTAIV I can say, install the latest hotfix.
  In addition, you can GTAIV tell you more RAM:
  Create a commandline.txt in the main folder of GTAIV and enter this txt to the following file:
  -availablevidmem 2.0

  This option set the amount of physical memory to video.

• How to put a video in a video (not related to the opacity!)

  Hello world!

  I have been all over the internet for an answer, but can't find one! It gets really fustrating. It's my first serious editing project and I want it to be perfect

  So I want to do is make a transition from one clip to another by putting the following in one clip.

  For example, I filmed a window and I want to have another video inside the window. So when I Zoom in completely on the window, I'll pass on the second video.

  So maybe what I need to do is to select a section of video and replace it with another. But how can I do?

  Hope you guys understand what I mean? If you need more information, please ask!

  Thanks for your help and your time!

  It really a job for AEFX.

  You must follow the movement as you zoom in and use a mask etc to bring in your new video as part of the window.

• How to put the button submit as Checked

  Hello
  
  I need to adjust my login button submit as Checked. for the HTML input tag we have checked attribute, but in our jspx for command button how to put this button that checked.
  
  Someone can help me.

  you mean enter button don't call action?

  Move your af:form from the top of the jsf to your input fields all about; defaultCommand here is your id of the button.

  
  
  
  
  

• Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem?

  Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem? Sometimes when I play a video game in the steam.

  Windows 7

  64 bit

  HP e9300z

  Processor: AMD Athlon II processor 4 620 X 2.60 Ghz

  RAM: 4 GB

  Graphics card: NVIDIA GeForce GT 220

  It does not give me an error message simply stops and restarts auto.

  When it reboots it just tells me that Windows has stopped unexpectedly.

  First - check that you have the latest drivers for your motherboard chipset, your video device, your audio device and your network devices.  The first place to look for those who are on the Web site for your computer model & specific brand:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4148392&LC=en&cc=us&DLC=en&lang=en&cc=us

  When you select your operating system (Windows 7 64-bit) I see that HP ony supplies those who they provided with the system originally.  It's practically worthless.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4148392#n177

  Yes, where to from here?  I would say that you should at least install the latest video card driver - as more modern games can use those strongly...

  http://www.nvidia.com/object/Win7-WinVista-64bit-301.42-WHQL-driver.html

  Download and install it.  If possible, you still have the original driver installed - this is more recent than most 30 months.

  It's an AMD 785 G chipset card mother configuration, if their site is correct.  Looks like you can download and install latest drivers from AMD for this also:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx

  I'd say it's a good start.

  What else?  It could very well be a heat problem.  Since it is a desktop - I suggest she get everything, buy some canned air for cleaning electronices and opening of this case and blow off any dust.  It can be quite the accumulation.  After blowing out, make sure that all the components that look like they 'plug' firmly/well connected.  Carefully.  Then, put the cover on and connect.

  Make sure that there is enough air around the case - put a fan in front of him if you have to.

• I can't play video of videomega.tv on mozilla, but when I use chrome, it works. How to solve this problem? Thank you...

  I can't play video of videomega.tv on mozilla, but when I use chrome, it works. On mozilla that it still can not be charged, said just because the server or network failed, or may format not supported. I have already updated to flash player and use html5 extension, without result. How to solve this problem? Thank you...

  Thank you for your advice, but when I checked it on topic: config, the value is 2, so I don't change anything.

  When I search another solution, accidentally, I installed engine (socialmedia.com) unwanted search so I am forced to reset mozilla. After that, the two problem solved all of a sudden!

  Thanks for all your help and advice, it is very appreciated by me.

• Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Is it possible to transfer videos from the iPod from someone else on my iPhone?  How to achieve this?

  Depends on the model of iPod exactly.

  If the iPod is supported you can try using AirDrop: How to use with your iPhone, iPad or iPod touch - Apple Support AirDrop

  If this is not the case, there are applications in the App Store that will allow you to send files, including videos taken with the iPod and who reside in the film to other devices.

  https://iTunes.Apple.com/us/app/photo-transfer-app-easily/id365152940?Mt=8

  Photo transfer app allows you to quickly copy pictures and videos from your iPhone, iPad, Mac or PC using your local wifi network.

  You can't send videos that are stored by default Apple video App.

• My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  problem iPhone 5s load is reduced to

  My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  Please help me anyone