How to read a particular value of a QString

Similar Questions

• How to read a counter value for the separation of the two edge before meter is stopped by the second edge (6602 Council)?

  I use a timer/counter with DAQmx 6602. I use the separation of two - available via DAQmx cash edge. Count between the two edges works properly, however I do not know how to read the value of the counter during the counting operation (i.e. after the first edge triggered the beginning of the count, but before the second edge triggered the end of the counting). I'll have to wait for the second goes off the edge of the end of the countdown until I can get a counter value. I need to be able to access the current value of the County during the count operation. This was possible in traditional DAQ. How can it be accomplished using DAQmx?

  Ah shoot - I was afraid that this might be the case (for what it's worth, my series of X returned intermediate values, but the material and the underlying driver are quite different)...

  You just need to take one measure at a time or you are buffer several measures of separation of the two edges at the same time?  So just to take one measure at a time, you can set a task of edges of count using the database internal time as the source using an arm start trigger (first edge) and a sample of clock (second Board) to work around the problem.

  Best regards

• 10g: how to read a key/value registry, the mac address

  Dear,
  
  I have developed an application using Forms 10 g. I need in a certain place to read a registry key for windows server 2003 on which the application server is installed.
  
  I know how to read the registry on the Client computer using webutil. But is there any other utility to read registry of the application server?
  Or I have to use D2KWUTIL in my form?
  
  Also, I need to read different physical address on the application server.
  
  Help, please
  
  Thank you very much.

  I do not remember where, but you can download it from there.

  François

• How to read an int value to a file

  Hello programmers.

  I am facing a problem no doubt very simple but which has kept me stuck for some time, so I'm now looking for your help.

  int i = 0;

  try {}
  FileConnection fconn = (FileConnection) Connector.open (System.getProperty ("fileconn.dir.photos") + "increment.txt", Connector.READ_WRITE);
  If (fconn.exists ()) {}
  OutputStream os = fconn.openOutputStream ();
  String value = "1";
  OS. Write (value. GetBytes());
  OS. Close();
  InputStream is = fconn.openInputStream ();
  i = Integer.parseInt (is. ToString());
  is. Close();
  }
  If (! fconn.exists ()) {}
  fconn. Create() ;}
  fconn. Close();
  }
  catch (IOException ioe) {}

  I know that the file of the photo isn't the best idea, it's just a test. So, when I go into the increment.txt file, I see that a '1' is written, however, when I try to start it I get a NumberFormatException, do you know why and how I can solve this problem?

  Thank you very much for any help, I won't forget the congratulations...

  Yes indeed you're right, it works!

  Thanks a lot again Simon, you be everhelpfull in my daily programming efforts.

  Here is the final code that worked for me:

  InputStream is = fconn.openInputStream ();
  InputStreamReader isr = new InputStreamReader (is, "UTF8");
  StringBuffer buffer = new StringBuffer();
  int ch;
  While ((ch = isr.read ()) >-1) {}
  buffer. Append ((Char) ch) ;}

  Temp = buffer. ToString();
  Temp.Trim ();
  i = Integer.parseInt (temp);
  is. Close();

  Bravo to you, of course...

• How to read the xml value in plsql store proc

  I need to read the value at the bottom of the xml script in plsql procedure. I do not understand how to write. I'm new in xml, please help me solve this problem.

  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < PrtyActDtlRequest >
  < AcctInfo >
  < > 84188 PartyID < / PartyID >
  < RelAcctID > 125148 < / RelAcctID >
  < RelAcctID > 251486 < / RelAcctID >
  < RelAcctID > 125147 < / RelAcctID >
  < RelAcctID > 125511 < / RelAcctID >
  < / AcctInfo >
  < / PrtyActDtlRequest >

  Here < AcctId > can be repeted n times (unbouinded), but < PartyID > is set once. This is the script that we will get out of the source system.

  Thanks in advance.

  Roy

  You needn't PL/SQL for it. Just use XMLTABLE:

  with t as)

  Select xmltype (')

  84188

  125148

  251486

  125147

  125511

  double x)

  Select PartyID,

  RelAcctID

  t,.

  XMLTable)

  ' / PrtyActDtlRequest/AcctInfo.

  go x

  columns

  PartyID path number "PartyID,

  Path RelAcctIDXml xmltype "RelAcctID."

  ),

  XMLTable)

  'RelAcctID '.

  by the way RelAcctIDXml

  columns

  RelAcctID path number ' / RelAcctID'

  )

  /

  PARTYID RELACCTID
  ---------- ----------
  84188 125148
  84188 251486
  84188 125147
  84188 125511

  Scott@pdborcl12 >

  SY.

• How to read the particular file workflow ID?

  Hi all

  I'm currently reading case workflow ID (E.g.: two folders are there library & MyWorkflows, I want to read MyWorkflows workflow ID). Below the code, I saw, but it returns all workflows of VCO.

  var workflowId = "";

  var workflows = System.getModule("com.vmware.library.workflow").getAllWorkflows();

  foreach(var wf in workflows) {

  if(wf.name == workflowName) {

    workflowId = wf.id;

  }

  }

  -Comprehensive summary at: http://www.virtuallyghetto.com/2011/12/how-to-find-VCO-workflow-ID.html#sthash.hFsdSKh1.dpuf
  Thanks in advance,

  Add an entry to your workflow in the workflow type category (workflowCat1)

  cat1Workflows = workflowCat1.workflows;

  Then you can iterate through them.

• How to read file(key-value) in OSB properties?

  Hello
  
  I have a scenario in which I have to read a few properties(key-value) in a file. Former entire code was developed in java and it is easy to read the java properties file.
  But now I need to implement this in OSB and performance is a crucial element in this project.
  
  I followed DVM approached defined in
  
  http://blogs.Oracle.com/christomkins/2010/02/domain_value_maps_in_oracle_se.html and http://blogs.oracle.com/christomkins/2010/02/domain_value_maps_in_oracle_se.html
  
  But it did not work. I have hundreds of properties (key-value pairs) to read and must transmit it to the service of the company and with the intervention of the proxy service.
  
  What is the best approach for this (can't go to db call performance being very critical)?
  
  Thank you
  Maryse

  Hello Francois,.

  XPath in the action assign OSB should be like -

  $DVMVar / ns1:rows[1]/ns1:row[1]/ns1:cell[1]/text()

  where DVMVar is the content below -

  
  
  
  
  
  
  
  Dealer.Locate.default.buypower.Link
  http://www.xyz.com
  
  
  dealer.locate.default.unitOfMeasure
  MILES
  
  
  Dealer.Locate.Brand.identifier.nu
  Nurun
  
  
  Dealer.Locate.Brand.identifier.bu
  Buick
  
  
  Dealer.Locate.Brand.identifier.ca
  Cadillac
  
  
  

  Kind regards
  Anuj

• How to read the value of list boxes by iteration in a loop For?

  I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.

  Any information would be welcome. Thank you!

  su27 wrote:

  I have a lot of combo boxes on the front of my VI [...]

  

  Be sure to close the references that you have finished with them.

• How to read an ADF ApplicationModule Cookie values?

  Hello

  How to read an ADF ApplicationModule Cookie values?

  My ADF Application uses custom Cookies, I created these cookies following this post: https://community.Oracle.com/thread/3823211

  I need to read the Cookie of the ADF ApplicationModule values.

  Could you help me, please?

  Best regards

  Jery

  User, tell us your version of Jdev, please!

  You should not read the model layer cookie values. You can read them from the view controller and pass them on to the model layer, the module of your application.

  To do this, you define a method in the application module that you call from a bean where read you the cookie.

  Timo

• How to read the values of the field of LOV disabled?

  Hi all

  I have a requirement, based on values that we entered one of the LOV fields, then we are arising from the new values based on the value that we entered this field of LOV. And then I must by default new LOV values derived in a two other fields of LOV and then disable them. Once the fields are disabled, then I'm not able to read the values using the pagecontext.getparameter... I get nothing when I tried to read using the pagecontext.getparameter.

  Pointers on how to read the values of disabled field/LOV?

  Thank you
  Clarriiza

  1. you already have values, and that's what you set in the LOV before turning off, right? So why do you need to recover again from the LOV.

  2. are you disabling or making it readonly? I think that if it is disabled, you might still be able to get the value using pageContext.getParameter.

  3 have you tried to get the handle to the LOV bean and get the value using lovBean.getValue (pageContext)?

  4. another Option is to combine the value of a FormValue Bean also (as well as the LOV bean) and retrieve it from FormValue.

  5 BTW, why are, why you're seen LOV if you disable it? Can't you just a TextBox?

  See you soon

  AJ

• How to read the value of an independent textInput element inside the method?

  Hello
  
  I had a group of detail based on a readonly viewobject. I added an independent element textInput, you say, EndDate to this group that the user can enter a value inside. Now, when I run the app I select a row in the table and press a button that triggers a method inside a bean. My question is how I read the value in independent textInput (EndDate) within the method element?
  
  getTable () .getRowData () does not print the unbound attribute. It seems that it only contains attributes underlying viewobject
  
  I use JDev 11.1.1.4
  
  Kind regards
  Will do

  Will do,

  You can better create a transitional attribute for that in your view object, so you can use a regular expression #{row.bindings...} to get the value.

  Steven Davelaar,
  JHeadstart team.

• How to read the value attribute and put inside?

  What happens if we want to read the attribute value? And want to put the data of runtime on the value of the attribute as
  
  < psoID ID = "user id" / >
  
  How to get the value of the ID as the user id. And how to put the run value on it?
  
  I can think about is that
  
  /psoID/@ID/value GOLD psoID/@ID/*[local-name () = 'value']
  
  And how to put the value inside ID ="? »
  
  Thank you

  Because we are dealing with a structure of type anyType you must use the functions of node (local name) in combination with predicates ([]) to read or write values (node) of the element:

  To read the value for example use the copy rule:

  
  
  
  

  This wil read:

  /processResponse/result/psoID/@ID

  on the message:

  
  
  
  
  

  You will see the value 'B '.

  To write, you use:

  
  
  
  

  Kind regards

  Melvin

• How to read the value of the javascript component text entry

  Hello
  
  I need to add ' / ' after user entering the first two characters and before entering the third character of character to the value of input text.
  To meet this requirement, I add a clientListener of type keyPress to input text element.
  My question is how to read the value entered by the user to input text in java script component (the clientListener method).
  
  I faked my requirement in a sample application @ http://www.easy-share.com/1912896093/format.7z
  
  Please help solve this problem.
  
  Thank you
  Kiran

  For setting/getting the value, you can even view:

  
  
  
  function keyPress (event) {}
  component = event.getSource ();
  
  Alert (Component.getSubmittedValue ());
  
  {component.setValue ("new value '");}
  ]]>
  
  

  Thank you
  Nini

• How to read the value of the selected item in the DropDownList control?

  Hello

  The DropDownList component has a selectedItem property is supposed to return a ListBase.

  But what I want is just the 'chain' which is supposed to be the selected item in the DropDownList control.

  How to read this value?

  Thank you

  -Malena

  You are misreading the documentation. ListBase.selectedItem returns an object. This item comes directly from your data provider, so you just have to go up or go for any property you need.

• How to read or get the current selected value of selectonechoice

  How to read or get the current selected value of selectonechoice, so that it can be used in the custom query.
  
  selectOneChoice11.getValue () m:System.NET.SocketAddress.ToString () returns the index of the list.
  
  from 0 - number of values in selectonechoice.
  
  I want to read the exact value of selected.
  
  Concerning
  
  Niaz M

  Why don't you try this?

  Re: Value of SelectOneChoice in valueChangeListener

  Both approaches will work...

  Julian