How to read/write metadata "comment by the user?

Similar Questions

• How to read/write tdms 2.0 files with the TDM C DLL?

  Hello

  How to read/write tdms 2.0 files with the TDM C DLL?

  How consequently the datas in interlaced with the TDM C DLL mode?

  Thank you

  Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.

• How can I add a comment to the document

  How can I add a comment to the document

  Hi djtbull,

  Please see the following KB doc to learn more about the same:

  Acrobat help. Commenting in the PDF files

  Kind regards

  Ana Maria

• How to read a file of all the text in a pl/sql variable?

  Hi, I need to read an entire text file - which actually contains an e-mail message from a system of content management - in a variable in a pl/sql package, in order to insert the database information and then send the email. I want to read the whole of a sudden text file, no not one line at a time. Shoud I use Utl_File.Get_Raw or is there a more appropriate to do this?

  How to read a file of all the text in a pl/sql variable?

   ...
  your_clob_variable := dbms_xslprocessor.read2clob('YOUR_DIRECTORY','YOUR_FILE');
  ....
  

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• How prevention JButton to actions generated when the user press down

  How prevention JButton to actions generated when the user hold down the key or the short cut
  The code below to show the question when the user keep pressing Alt O
  We want to stop the JButton to generate multi shares just a share only
  A code example shows the behavior that needs to be prevented. Keep pressing "Alt + O" and you will see that the standard ouptput will print the timestamp
  Note Please, I'm NOT interested in the mouse press which is a solution by adding a threshold (setMultiClickThreshhold (long line) on the JButton as an attribute.
  
  

   
  public class TestPanel extends JPanel
  {
  
     private JButton btn;
  
     public TestPanel()
     {
        btn = new JButton("Open");
        this.add(btn);
        registerCommand(new MyAction(), InputEvent.ALT_MASK,
              KeyEvent.VK_O, btn, btn.getText(), 0);
     }
  
     public static void registerCommand(AbstractAction action,
           int mask,
           int shortCommand,
           JComponent component,
           String actionName,
           int mnemonicIndex)
     {
        InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
        KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
  
        if ((component instanceof AbstractButton)
              && mnemonicIndex >= 0
              && mnemonicIndex < actionName.length()
              && (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
        {
           ((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
        }
  
        if (inputMap != null)
        {
           ActionMap actionMap = component.getActionMap();
           inputMap.put(knappKombination, actionName);
           if (actionMap != null)
           {
              actionMap.put(actionName, action);
           }
        }
     }
  
     public static class MyAction extends AbstractAction
     {
  
        /**
         * 
         */
        private static final long serialVersionUID = 1L;
  
        @Override
        public void actionPerformed(ActionEvent e)
        {
           System.out.println(System.currentTimeMillis());
  
        }
  
     }
  
     public static void main(String... args)
     {
        SwingUtilities.invokeLater(new Runnable()
        {
           public void run()
           {
              JFrame frame = new JFrame("Testing");
              JPanel panel = new TestPanel();
              frame.getContentPane().add(panel);
              frame.setPreferredSize(new Dimension(500, 500));
              frame.setMinimumSize(new Dimension(500, 500));
              frame.pack();
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              frame.setVisible(true);
           }
        });
     }
  
  }

  Published by: user12130673 on 13-feb-2013 03:01

  Use getKeyStroke (int keyCode, int modifiers, boolean onKeyRelease) hit with onKeyRelease = true instead?

• How can I mount types defined by the user of the package?

  I have two types of similar packages (gt_Teste) in two different packages.
  
  How can I mount types defined by the user of the package?
  (I shouldn't want to made a new statement va_Teste2 pkgl_lu2.gt_teste due to the desire to increase memory allocation)
  
  ------------------------------------------------------------------------------------------
  -ANONYMOUS BLOCK
  ------------------------------------------------------------------------------------------
  declare
  va_Teste pkgl_lu1.gt_teste;
  va_Teste2 pkgl_lu2.gt_teste;
  Start
  --
  pkgl_lu1.prcl_init (va_Teste);
  pkgl_lu1.prcl_print (va_Teste);
  
  +/*
  -I don't want to do it because of memory allocation:
  Because me in va_Teste.First... va_Teste.Last loop
  va_Teste2(va_Teste2.Count+1): = va_Teste (i);
  End loop;
  */+
  
  pkgl_lu2.prcl_print (CAST (va_Teste AS pkgl_lu2.gt_Teste));
  end;
  /
  
  ------------------------------------------------------------------------------------------
  -PACKAGE PKGL_LU1
  ------------------------------------------------------------------------------------------
  create or replace package pkgl_lu1 is
  type gt_teste is table of index varchar2 (100) by simple_integer;
  
  procedure prcl_init (pi_teste in out nocopy gt_teste);
  procedure prcl_print (pi_teste gt_teste);
  End;
  /
  
  create or replace package body is pkgl_lu1
  ---------------------------------------------
  procedure prcl_init (pi_teste in out nocopy gt_teste)
  is
  Start
  pi_teste (pi_teste.count + 1): = 'A ';
  pi_teste (pi_teste.count + 1): = 'B ';.
  pi_teste (pi_teste.count + 1): = 'C ';
  pi_teste (pi_teste.count + 1): = ';
  end;
  ---------------------------------------------
  procedure prcl_print (pi_teste gt_teste)
  is
  Start
  I'm in pi_teste.first... pi_teste. Last loop
  dbms_output.put_line (pi_teste (i));
  End loop;
  end;
  End;
  /
  
  ------------------------------------------------------------------------------------------
  -PACKAGE PKGL_LU2
  ------------------------------------------------------------------------------------------
  create or replace package pkgl_lu2 is
  type gt_teste is table of index varchar2 (100) by simple_integer;
  va_teste gt_teste;
  
  -procedure prcl_init (pi_teste in out nocopy gt_teste);
  procedure prcl_print (pi_teste gt_teste);
  End;
  /
  
  create or replace package body is pkgl_lu2
  procedure prcl_print (pi_teste gt_teste)
  is
  Start
  I'm in pi_teste.first... pi_teste. Last loop
  dbms_output.put_line (pi_teste (i));
  End loop;
  end;
  End;
  /

  I see, well it's unfortunate bloody.

  Ideally you would have a package (utility package or something) with objects like that, that can be shared between the development environment, unless you never have an interface code (each package is entirely distinct from all other packages, and honestly, it's not likely to happen).

  I guess that your only option (I think) If you are concerned with memory usage would be to remove the table while assigning a new.

  For i In va_Teste.First..va_Teste.Last
  Loop
    va_Teste2(va_Teste2.count+1) := va_Teste(i);
    va_Teste.DELETE(i);
  End Loop;
  

• How can I remove comments from the users and groups

  I have my in my users and groups in the system preferences a user snd invited another user

  How can I remove them

  Go to Preferences system-> users and groups, and then press the lock to allow you to change the settings. Then choose 'user comments' in the sidebar and uncheck "Allow clients to connect to this computer". This will not make this option disappear, but after that you will not be able to use the Guest user.

  «Respect for the other user, simply choose it in the sidebar and press on the '-' button.» Make sure that no one uses this user.

• How to read a counter value for the separation of the two edge before meter is stopped by the second edge (6602 Council)?

  I use a timer/counter with DAQmx 6602. I use the separation of two - available via DAQmx cash edge. Count between the two edges works properly, however I do not know how to read the value of the counter during the counting operation (i.e. after the first edge triggered the beginning of the count, but before the second edge triggered the end of the counting). I'll have to wait for the second goes off the edge of the end of the countdown until I can get a counter value. I need to be able to access the current value of the County during the count operation. This was possible in traditional DAQ. How can it be accomplished using DAQmx?

  Ah shoot - I was afraid that this might be the case (for what it's worth, my series of X returned intermediate values, but the material and the underlying driver are quite different)...

  You just need to take one measure at a time or you are buffer several measures of separation of the two edges at the same time?  So just to take one measure at a time, you can set a task of edges of count using the database internal time as the source using an arm start trigger (first edge) and a sample of clock (second Board) to work around the problem.

  Best regards

• TDMS write a comment in the middle of Data Acquisition

  Hello

  I am currently using TDMS for my data record. Currently I log data from a Keithley module via GPIB connector.

  Essentially, I want to save data in intervals and during the recording of data, I want to have a comment section where I can write the changes that have been made.

  It connects every minute and I want to add a comment in the minute 5 for example. What is the right way to apply it.

  Thank you

  I would use a loop that is dedicated to writing in the PDM file.  You can then send commands/data to this loop in a queue.  You could a single command to write your DAQ data and another for observational data.  I would connect all the data data acquisition in a group and observational data in a second group.  That will make your file much easier to understand.

• How to read multiple channels based on the external clock

  Hello

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  I use 6254 multifunction for playback of tension with VC ++ 6 as the development tool.

  Based on the documentation NOR I created tasks like this.

  DAQmxCreateTask (_T ("Voltagetask"), & taskHandle);

  DAQmxCreateAIVoltageChan(taskHandle,sChannels,,DAQmx_Val_NRSE,0,10,DAQmx_Val_Volts,);

  DAQmxCfgDigEdgeStartTrig (taskHandle, "PFI2", DAQmx_Val_Rising);

  DAQmxCfgSampClkTiming(taskHandle,"PFI2",303000,DAQmx_Val_Falling,DAQmx_Val_FiniteSamps,nSamples);

  DAQmxStartTask (taskHandle);

  After the generation of clock finished thanks to the DAQmxReadAnalogF64 function, I tried to read samples of each channel.

  DAQmxReadAnalogF64 (taskHandle, DAQmx_Val_Auto, 10, DAQmx_Val_GroupByScanNumber, read, m_nStates & sampsPerChanRead, NULL);

  Total number of samples (nSamples) available in the buffer when the task is created with a single channel and several channels are still to come as even. In several modes of channel returns total sample by channel, which is equal to the total number of samples divided by the number of channels at once.

  For example, if a total number of clock 8000

  With single channel, it reads all the 8000 samples (m_nStates = 8000, sampsPerChanRead = 8000)

  When two tracks he read 4000 samples per channel and so on. (m_nStates = 8000, sampsPerChanRead = 4000)

  If any body know, on every clock how to take samples of all of the configured channels.

  Thanks in advance,

  Renjith.

  Renjith,

  Please note that the behavior, I explained is in line with the provisions should only if you use your clock as I convert clock. You can find information about the different types of synchronization of the analog inputs using NOR-DAQmx; the element to search for is "clocks".

  Since you do not set the clock to convert MY (should be DAQmxSetAIConvSrc()), the fact that I mentioned above is only informative for you, but does not apply to your question.  Sorry for responding too quickly without looking in your code between quotes...

  In order to answer your question, we take a look at the approach to programming DAQmx:

  If you configure your task to be "finished", the task will stop running if the number of samples per channel is acquired. In the case of an external clock (not configured as I convert clock), served it in the sampling interval. The sample clock will automatically receive a sample for all channels with a single clock pulse. From this point of view, the installation program you have in your program seems correct.

  If you do not get the number of samples that await, the fault must be somewhere in your playback function. Do you get any error messages?

  DAQmxReadAnalogF64 (taskHandle, DAQmx_Val_Auto, 10, DAQmx_Val_GroupByScanNumber, read, m_nStates & sampsPerChanRead, NULL)

  If you set m_nStates set to 8000, it's here. You say the Read function to retrieve 8000 samples. None. So if you have two channels, DAQmx acquires 2 x 8000 samples, but read you only 8000 samples... Please change m_nStates to

  m_nStates = #channels x #samples by channel

  This should solve your problem.

  hope this helps,

  Norbert

• How to read 4 similar channels at the same time with the MCC

  Hello

  with the mcc libraries and a card PCi-6034 classic (by calculation of the measure), I want to read 4 analog channels at the same time. I have a "scope" with 4 channels.  How to read 4 channels at the same time with the mcc?

  MF

  Hello MF.

  Thank you for using OR support.  I guess you try to program in LabVIEW.  Where exactly did you get the MCC library of?

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to read/write files in Photoshop CC?

  Hi all
  I have plugin for Photoshop CC2014 and above using node.js to reading/writing files, download remote files and restful calls. It does not in Photoshop CC because CC uses 4 CSXS and node.js is not available here. So is it possible in javascript to perform these operations (reading/writing/download) in CSXS4? I think I can use XMLHttpRequest to download files, but how to read and write? Thank you!

  CEP has an API to access Local file.

  GitHub - Adobe-CEP/CEP-resources: Getting Started with Adobe CC 2014 Extension SDK

• Can not open Illustrator CC 2015, read/write permissions error, but the permissions are set correctly.

  I can not open Illustrator because of this error.

  "To work properly, Adobe Illustrator requires permissions of folder preferences be"read-write..." »

  Link support on the error message suggests to change permissions to a file location that does not exist. All permissions are set to read-write, and no changes have been made since the upgrade to 2015.  Uninstalling and reinstalling did not work.  Very frustrating to pay for a product that I can't use.

  I solved the problem by resetting the permissions of my entire disk (apply to items included...). I still can't explain why it was necessary after the upgrade to 2015 from 2014 CC CC.