6500 a doesn't wake up

Similar Questions

• 6700 premium wireless when you sleep for a while doesn't wake up.

  OfficeJet 6700 Premium works wireless.  After he goes to sleep for a while, he doesn't wake up and messages telling me, it's not connected.  I turn on the printer to wake her up, and then turn off and turn it back on and all is well.   If I just turn it on, it still does not print. Have printer set to 15 minutes before going to sleep.  Only when she sleeps for an extended period of time (time or more, or at night) is it that way and I get the offline problem.

  Problems of number of wireless network Test results found. : Diagnostics results are that all pass with the quality of the excellent signal, 1 channel.... Disconnect is the total count of 711, last hour is 3 and disconnect the count in last 24 hours is 24.   The network name is the name of my network, hardware address (MAC is 00: 9 c: 02:0 b: d1:e8 with the IP address: 192.166.1.94, Source of Configuration: manual.) Communication mode: Infrastructure, Auth Type: WPA - PSK, chryptage: Auto (AES or TKIP).  With the help of windows 7 (64 (64 bit) bit) with HP Pavilion P6000 Series, model p6612p,

  After you through your suggestions and following those of others and reading pages of info, I got to the point where I updated the firmware.  When I finished it, he told me that he could not connect wireless and use the USB cable.  After connecting that and feel, I found that I have two 6700's on the computer, a regular and wireless.  When I select the wireless, everything seems (for a day) working as expectred and start perinting even if the printer has been asleep that if it continues, solved the problem.

• VISTA DOESN'T WAKE UP FROM SLEEP

  I RECENTLY REINSTALLED VISTA. AND THE PROBLEM STARTED THEN ONLY.

  I HAVE VISTA ULTIMATE ON MY LAPTOP. WHEN I CLOSE THE LID, IT WILL "SLEEP" FASHIONABLE AND ALSO WHEN I PUT IT ON THE MODE "STANDBY" MANUALLY, HE DOESN'T WAKE UP AS I OPENED THE LID. BUT MY SLEEP MODE INDICATOR HAS DISAPPEARED, BUT HE DOESN'T WAKE UP. AND AS LAPTOP SOUND FAN HEATER DOES NOT WORK.

  We have no idea why you need to reinstall Vista.

  You had then some serious hardware problem that would not have been solved by a reinstall of Vista

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the link above and the 'related links '.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite U400 doesn't wake up after that I closed the lid

  When I want to do something like go out then I close the lid and then I can't get the laptop to wake up again, I have tried a few things but nothing doesn't seem to work.

  I na? t use Toshiba Power Save, I use the normal XP usual energy and I even tried with Toshiba Power saver, but not the software from start > Control Panel > but still the laptop not wakes up after I closed the lid.

  Anyone who can help me with this problem?

  thnx.

  Here's the good news, but could you please post a short instruction how you solved this? I think it would be interesting for other users here in the forum!

• Latitude E6410 doesn't wake from sleep

  I recently got an E6410 used for my wife. I installed Windows 7 above. All is well except that he awakens from his sleep. When she is done with her, she must remember to do a shutdown or Hibernate. If she is simply closed the lid, put it to sleep, he never wakes up, and she must pull the battery to restart.

  Any suggestions?

  I had a similar problem with my Latitude E6510 (under Win 7 x 64). Tried a bunch of suggestions, and solved... I think so.

  My theory is that the computer has been the difficulty to restart sleep - internal and/or external hard drives (at home, I use several hard drives via a Dell docking station; to work I use not all except residents).

  I went to options / advanced settings of power and sleep mode / connected forever changed the option "when to stop the drives'. (I left the default setting - 10 minutes I think - for battery operation.) It was there a week and so far so good (vs ancestral almost everytime the awakening from the sleep problem previously).

  Advice from the previous poster re re - install Dell drivers is probably a good, but it doesn't seem to work for me (I recently did a clean Win 7 re - install). In fact, my next troubleshooting is to try to understand why the video driver hangs on a regular basis (if the recommended Dell or a more recent version of the Board manufacturer driver.)

  Good luck.

• Qosmio X 770 doesn't wake up

  I have a Toshiba Qosmio X 770-116, part.nr PSBYSE-01N013BT, a serial no 8B088257K.
  Windows 7 Home Prem is installed.

  Usually, when I stop working, I have closed or I use normal sleep.
  The option was there to also choose a deep sleep, I wanted to try.
  Unfortunately my laptop won't wake up more.

  When I push the power button, I can see the (red) power button light and hear the fan.
  In addition to that: nothing.

  I read on the internet that there are many problems with the deep sleep.
  One of the things was to remove the battery and RAM memory for 30 minutes, but that did not help for me.

  Can someone help me with some advice?

  Thank you

  You mean with deep sleep, hibernation mode, right?

• X carbon 1: after open the cover in mode 'sleep' it doesn't wake up

  Dear all

  power option is implemented in sleep when I close the lid and after opening it, he did not wake up. I have to press the power button for 5 seconds about to reboot the system

  I use windows 8

  Help, please...

  Thanking you in advance

  Asher

  The same problem with my 20 has 7. Lenovo said machine is DOA and I should have the motherboard replaced (they have no respondent relly on that much, technology has decided that, in 1 minute).

  That's what I discovered when I went to install Win7 to a factory condition: I has nothing to do with the power manager; the problem persists with the PM old or newer version. When it is plugged into the internet connection wired and wifi not activated - sleep and Awakenings are solid as a rock. When WiFi - reproducible gel mode "sleep".

  Run the utility of the Lenovo software update and install optional install WLAN Intel 17.12.0. Or check in your control panel to win if you have the Intel "Proset/Wireless Software 17.12.0 already installed. This update fixed the problem for me. But I have not any 3rd party software turns yet, so I can't say that this is the final solution.

• W510 doesn't wake up when she goes to sleep - Bit from Windows 7

  Hi all

  The Lenovo thinkpad w510 won't wake once she goes into sleep mode, I have to press the power button until it stops completely and restart completely, I tried different settings in the management of food etc. We have the same pissue on 3 different w510 with Windows 7 pro 64-bit

  Does anyone have a solution for this problem?

  Kind regards

  
  

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• my monitor doesn't wake up.

  I changed the power implemented to never go to bed, but my monitor will not return. I move the mouse, it seems that the computer wakes up, but nothing changes with the monitor. the computer and monitor are Dell with Windows Vista

  Hi Carl,

  Please go to the Microsoft Community Forums.

  1. do you get an error message?

  2. which device is configured to wake the computer?

  Method 1.
  You can also check out the articles below and check.

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode
  http://support.Microsoft.com/kb/930091

  Method 2.
  The problems of wake the computer from sleep mode
  http://support.Microsoft.com/kb/266283
  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

• Vista Home Premium doesn't wake from sleep mode.

  I've been recently updates of the system. Not sure if it is a cause. I checked my device keyboard and mouse and they are set to wake the computer. SO why this happens...? I'm not a wise person on the computer. I pretty much try tips that I find online, even though I know not what half the verbage means. Then. pls help to use then and very basic jargon. Thank you for your understanding...

  Hi lesann1,

  1 have. the updates you tried to install?

  Step 1:

  You can try to upgrade the video card and see if it helps:

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2:

  Also, try the following steps and check.

  Click Start, type of aircraft in the area start search and then click on Device Manager in the list programs.

  In the user account control dialog box, click on continue.

  In Device Manager, expand mice and other pointing devices.

  Right-click the USB mouse, and then click Properties.

  Click the power management tab.

  Clear the allow this device to wake the computer check box, and then click OK.

  Also try to clear the allow this device to wake the computer to also network adapter.

  Step 3:

  You can also recreate the power plan and check.

  Check out the link:

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Viber doesn't wake up my cell phone, Xperia Z2

  Hi friends,

  I have a xperia cell Z2. When my cell phone is in "sleep" and someone calls me Viber it does not sound and not wake up my phone so when I wake up, I have missed calls.  Please let me know if anyone khow about this problem.

  Are you in stamina mode?

• Dell coming Pro 8 doesn't wake up not the mode standby

  Twice now, when I leave my only DV8P and it goes standby mode, I can't do the wake him up.  The first time I had this problem, I could close it in connected state and it reboot.

  Both times, the battery was almost at full capacity.  It is not a battery problem.

  To my knowledge, I have updated the latest drivers.

  When I got my DV8Pro I had no problem with the sleep/power button.  After the installation of windows updates and dell updates my DV8Pro would not wake from sleep.  I had to hold the power button to the low during at least 10 seconds release the button and press it again and then it might start up.  I tried to uninstall the updates one at a time and that has not fixed the problem.  Has decided to start again and went to "Recovery Options" and select "Get Started" from the "all delete and reinstall Windows.

  My BIOS has been updated as a step to try to cure the problem of sleep and any withdrawal does not have to uninstall the update of the BIOS.  I mention this because maybe that helped my question because the re - install windows has been done with the latest BIOS. If you encounter this problem, maybe you want to update the BIOS before the re-installation of windows.  The BIOS, I used is A04.  (if you want to check your BIOS in the type of research "run" charm. Press enter on the key board, and then in the box that opens type "msinfo32" and click ok.  Look at the entries and you will find the version of your BIOS).  The latest BIOS for the DV8Pro is on the site of dell under support.  I think that I have also updated the update of the firmware on the chip before I re-installed windows.

  During the re-installation of windows, I have selected custom set upward and chose to not allow windows to update automatically.  The next step was to install all updates to the Dell web site DV8Pro.  After that all Dell updates have been installed, I went the updates of windows and installed every update, one at a time manually. After each update, I checked to see if the sleep problem reappeared.  This process took some time and I don't know what would happen if you installed just them all at once.  I know that from the top of the list and the installation of each of them individually has fixed the problem.   I still have my defined not updates have it automatically installed and today, there are 3 more updates.  Each of these one at a time, I installed and it still works.  Internet connection is also good, I checked after each update also.  I have not changed a new wifi again.  All this was done at home.

  Look well, it is a very frustrating problem and I almost all upset but I like the device so I gave him a good try to make it work.

• Alienbware X51R3 with S2716DG from Dell doesn't wake up from sleep mode

  I recently bought a new Alienware X51R3 and Dell S2716DG Monitor. The PC happened a few weeks earlier from the monitor, and the system worked very well (and wake up from his sleep normally) on the old monitor.

  After setting the new monitor (executed in a single monitor configuration) on the display port, the PC is no longer waking up from his sleep. I tried to update the driver for the monitor and turning off the monitor 'Deep sleep' works without success.

  It worked fine with the previous monitor so I think that the monitor is most likely the culprit but haven't found a solution or work around yet. Power off the PC everytime I walk away from it or disabling sleep seems completely unnecessary.

  The Dell Support program help hard locks - the PC every time I launch...

  After a little violin, I was able to adjust the settings for PCI Express Link State Power Management from the command line with:

  powercfg 381b4222-f694-41f0-9685-ff5bb260df2e 501a4d13-42af-4429-9fd1-a8218c268e20 ee12f906-d277-404b-b6da-e5fa1a576df5 0

  Will test the sleep options and report.

• 8600 printer doesn't wake up

  HP 8600 printer wake if I unplug the printer out of sleep.  It is plugged into the wall outlet. I am running XP

  How is it connected?

  Is that what the 8600 to update firmware?