How to add a second connection of the user with windows 8

Similar Questions

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• State of connection system tray icon incorrect or choosing bad network connection when it is connected to the internet with Windows 7.

  Hello people,

  My Network icon always shows that I'm connected wireless.

  If I disable my wireless, it becomes the symbol of ethernet.

  As soon as I turn on my wireless, the wireless icon appears once again!

  I am running Windows 7.

  My reports of cable 1 GB/s network

  My reports 65 MB/s wireless network

  Windows 7 allows you to select the slower wireless network that should not be the case.

  Under network connections, select advanced and advanced settings

  and change in order to make sure that the connection to the local network was the first.

  I've updated my card driver to the latest version of the software. I also uninstalled and reinstalled all network cards with all necessary reboots of the PC.

  Under properties of the connection to the network Local and the properties of the wireless connection

  I chose properties IPV4 & IPV6, advanced and set the ethernet connection for the metric of the interface of 10 and the wireless to a metric of the interface of 25.

  I did too...

  In the device-> network-> adapter Manager Intel Wireless-> properties-> tab power management-> uncheck "allow the computer to turn off this device to save power".

  Windows always selects the slower network ignoring the manual settings...

  He has never done this since yesterday. Please help me.

  In short, when the wired connection is used, the ETHERNET ICON must be on the system tray, and not on the Wireless ICON even if both are activated. This was the case for me two days ago.

  I don't know what to tell you. In my (wide as technician) experience, when there are two a Wi - Fi and connection the icon always shows the bars wireless.  Your computer seems to be an exception that I can't explain.

• Connectivity of the Internet with Windows 7

  I have a desktop computer with Windows 7 installed and a laptop with Windows Vista installed.  I access the internet via a wireless network.  Installed with Windows 7 computer has network connectivity, but not internet - diagnosis suggests that the problem is that with the internet connection to the modem, however, my laptop has network connectivity and the internet.  What is the cause with the desktop internet connectivity problem?  What can I do to fix this?

  Dumbo,

  Many people have difficulties to internet connection as a result of the recent update to Win7.  It has nothing to do with their AV. applications

  The update KB2705219 is said to be, the cause and uninstalling has resolved the problem at least a user [who did not provide more details, he comes to say it was fixed].

• Connection of the user before Windows 8 PRO WiFi connection

  Windows 8 Pro, WiFi doesn't connect before a user connects.  I manage all the remote PC and restart them remotely via remote desktop.  In Windows 7, we had only to ensure that the availability of the wireless profile has been created for all USERS.  In Windows 8 PRO, even if I have my profile wireless for all users it does not.  If I try to connect with Remote Desktop, and a user is not already connected, the wireless connection is turned off.  If I connect remotely to a user, the WiFi off as well.  It is a major issue.  Is there a difficulty, a configuration change to enable the WiFi for the value IT if no user is logged on?  I'm about to go back to Windows 7 PRO.  Windows 8 is great, but I'm so again, I don't want to think about.

  Any help is greatly appreciated.

  Thank you, KG

  Thanks PBWS.  In fact, I solved the problem.  The problem was caused by the WiFi I was using either WPA2 Enterprise encryption.  As soon as I changed my personal WPA2 worked well all.    Under Windows 7 PRO, it wasn't a problem.

  Thanks in any case.

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• Centro does not connect to the synchronization with Windows/Palm HotSync

  My Centro ceased to sync with my Windows XP computer.  It just does not connect.  Did the soft reset, restart windows, etc.  No problem in Device Manager.

  The value of sync with outlook on the exchange server data.

  Same Centro and sync cable fine on the Linux machine using gnome-pilot and lines of development to access the same data exchange.

  Assuming that you can navigate through your windows machine.

  1. open Device Manager
  2. when your device is connected, you will see palm os handheld
  3. click straight and say to uninstall the driver
  4 disconnect your device and soft reset it
  5. reconnect the appliance and leave it to reinstall the driver

  This will force reinstall the driver and also tell us if there are errors with the driver.

  Message relates to: Centro (Sprint)

• How to add a second database connection

  Hello

  I added a new database connection. Then, I want to create tables business components but I do not see the schema of the database connection newly added in the drop-down list schema.

  
  

  Is there something else to do to be able to add a second connection to the base?

  Thank you

  JDev 11.1.1.6

  DB connections are strongly coupled with modules of the application. The best way would be to create a new project template and use this second model to access the database. Then, you use each application as application root module modules so that each gets its own connection.

  If you need to have these two dbs data in a table or query, you must use a link db or synonym to access data from ad of your DB connections.

  Timo

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• Establish the VPN connection before the user logged

  Hello world!

  Anyone know if it is possible to run the cisco vpn client and establish the vpn connection before the user logs (Windows 7)? How?

  Thanks in advance!

  You must Anyconnect VPN.

  use start before logon feature you can get the VPN before windows logon.

  There are a lot of configuration guide that you can find in CISOC regarding anyconnect SBL.

• When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image

  original title: video editing

  When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image. How can I see the video in its entirety, but long, so I can change it to what I want?

  What is the extension of the home movie file?

  Windows Movie Maker doesn't accept the formats of files (extensions) following:

  Video files: ".asf", ".avi", ".dvr-ms", ".m1v", ".mp2", ".mp2v", ".mpe", ".mpeg", ".mpg", ".mpv2", '.wm' and '.wmv '.

  * Extennsion file or the file format is represented by the last 3 letters of the file.

  If the file format of your home theater is not on the list above, google for a FREE video converter and a change in WMV format. Then re - import to Movie maker.

  WMV is the most reliable and foolproof format for Windows.

• How to add a document ID to the form

  How to add a document ID to the form

  All PDFs have a unique document attributed by the design program ID. You can see in the file properties in the properties in advance under the direction of XMP Media properties.

  Then there's the docID object that is an array of two strings. The first element is the permeant id and the second is the ID change that identifies the modified copies.

  Mean you some kind of sequence number or control number?

• How to add a new language to the language and region of the Panel

  Hello
  Setting preferences in Mac OS X, I could ' t help noticing the huge amount of languages available in the Mac OS X El Capitan. Located in same languages like Klingon, Navajo and Latin - and of course, this looks like a great tribute to the rich diversity of languages in humanity. However, Mac OS X El Capitan still missing a language - my own. How can I add another language to the language and region of the Panel? How Klingon and Latin is?
  Of course, I have this Internet search, but nine out of ten results were some tutorials explaining how to add an EXISTING language to the ones I already have.

  Thank you.

  Rui Valente

  You just 'Add' a language. You would have to edit all applications to create strings of replacement for all menus, dialog messages, buttons, etc., that it doesn't translate from one language to the other. Each application has a list of strings mapped to the display string for each supported language. The localized string replaces the generic string in the user interface element.

  You can try to contact Apple and volunteer to locate the operating system, they would have confidence in you (unlikely) or hire a person to validate your work.