How to reconfigure ACR interface?

Similar Questions

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

• Location-how to create an interface to the .rrh file using jde?

  Hello

  I created my own files .rrh and .rrc, but when I build my project in jde 4.5 there is no corresponding interface is created for the file .rrh... Please tell me how to create the interface using jde and where it is located?

  create an interface named NAMEResResource (with NAME = your name of the module).
  create a long BUNDLE_ID and a string BUNDLE_NAME and set some values (random).
  You can now add resource strings, with a random value as all are managed by the internal interface of the JDE.

  You must create the entry of resources in the HR Manager/DRR files and copy the name of the entry in your own interface.

• How do the management interface of configuration of an ethernet interface?

  We have an ASA 5540 requiring a LAN port for failover. And the left side of the interface available only the management port. How do the management interface of configuration of an ethernet interface?

  You can disable the mode of management only on this interface to make as regualr routable port and use for other purposes, including the purposes of failover LAN database.

  On the management interface - 5510 but applies generally to the management0/0, itself including 5540

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Basic LAN failover configuration

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/intParam.html#wp1057800

  Rgds

  -Jorge

• How to reconfigure the CRS for ASM when the hostname has been changed?

  How to reconfigure the DSO when the host name (and IP addresses had changed on a server)?

  Thank you and best regards.

  Hello

  Follow this for 10g RAC IP change http://www.db-nemec.com/RAC_IP_Change.html

  Follow this for 11g autonomous http://oracleprof.blogspot.co.uk/2010/06/grid-infrastructure-reconfiguration.html

• How to reconfigure FDM apps to point to a different Oracle repository?

  Hi all
  
  We are in the middle of the relocation of a number of databases Oracle metadata. I wonder how to reconfigure FDM apps to point to a different database server?
  
  As far as I know, the only place to set up the database of the FDM app goes to is when you create the application. I don't see any setting in Configuration, integration, or Application settings, which stores the name of the database server.
  
  I know that you can change the configuration of the application by choosing to add an Application to the login screen and change the details of the application, but it only allows you to change the name of the Service and not the name of the database if its going from Oracle for Oracle. If I change to SQL server it allows me to specify the name of the server, but of course, this isn't what I want.
  
  Does anyone know how to do this?
  
  Thank you!

  Don't know how to do this with Oracle. I think you need to change your tnsnames.ora or sqlnet.ora files to point to the different server, but I don't know what else would have to change. The Guide of DBA FDM may have the info you are looking for.

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Qosmio G40 - how to reconfigure the keys above the keyboard?

  Since the upgrade to Windows7, the buttons on the top of my G40 (TV, multimedia, Rec, Dolby, etc) don't work anymore. When I click on one, a pop-up window appears asking me to set up the button.

  Now, I've changed a single button to task wrong.

  (1) how can I change this back?
  (2) how can I get functions return when moving the cursor to the top of the screen (does not work either)

  THX

  Hello

  I think that you don t have to reconfigure the keys, you just need new version of Toshiba Value added Package which controls the multimedia keys.

  I checked the website of Toshiba Qosmio G40 and Windows 7 and there is a newer version that is compatible with Windows 7:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  It seems the newer version 1.2.40

  Check this box!

• How to use the interface rs232 with DC electric charge of chroma

  Please, help me to say... I'm new to labview... I HAV to interface chroma 6310a dc load for a PXI system using only the RS232c communication in LABVIEW... I discovered the way in which this v hav to install the associated drivers until we start programming. so please help me to find the driver, how to install it and make a successful programming

  I told you where could find a sample. Go to your instrument driver and open the Agilent 34401 function initialize. See how it handles setting the com port and termination character.

• How to reconfigure the windows media player?

  My computer is telling me that the files in Windows Media Player are corrupt and the player must be reconfigured. I wonder how you do that?

  Hello

  1. what operating system is installed on the system?

  2 have you made any changes to the system before the show?

  In case you are using Windows 7, then try the troubleshooting steps below.

  You can't start over with the new library in Windows media player, but you can delete the database of Windows Media Player. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.

  Note: you don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If the above does not solve your problem then clear cache of database of Windows Media Player files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) click Start, click Run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  (c) select the folder Media Player and then click on Delete on the file menu.

  (d) restart Windows Media Player.

  Create a new library

  http://Windows.Microsoft.com/en-us/Windows7/create-a-new-library

• OfficeJet 6100: HP Officejet 6100 configured for wireless than no. Longer exists. How to reconfigure it?

  Hello

  I have an Officejet 6100 which was my computer classroom. After his retirement, I brought the printer home. I tried to configure it to print via my WiFi at home. When I print the diagnostic report, it shows that the printer is always set to the WiFi of the school. However, the school, and therefore the WiFi, no longer exist. Is it possible to reconfigure the printer, or simply remove the connection with previous WiFi? If so, how that would accomplish this?

  Thank you 1 x 10 ^ 6.

  Mark

  Publisher and editor-in-Chief
  Red 2 - the Magazine for teens

  So, I have a younger brother who is fond of asking stupid questions. Watching me struggle to install this printer, he asked: "have you installed the software?" * beep * it! Installation of the software, did the trick. Imagine that.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• Need to know how to reconfigure the router settings

  Hi - I was on the phone with technical support for an hour before, they told me they couldn't help me unless I paid or bought a new router.  Isn't an option for me financially so I hope someone can help.  :-(

  My cable signal came out very briefly, probably for 5 to 10 seconds.  When she came back, my router not working.  I jumped through all the hoops reset that work normally, but nothing has worked this time.  The tech guy said that I need to reconfigure my router settings.  I don't know how.  Can anyone here help me?

  I am running Windows Vista and the router is a Linksys E1000, version 2.  Is there a page on this site that tells me what to do?  I could not find.

  I thank very you much for any help you can give me.  I'm desperate!

  Thank you for your kind reply.  I did some reading and found that if I reinstalled the router, that would take care of the problem.  He did, and I'm back online!  I appreciate your response however!

• How to reconfigure the boot.wim file

  Hey people, I'm trying to update my Win7 Ultimate from Vista Home Premium laptop.  However, when the beginning of the installation I get an error this boot.wim file must be reconfigured to mark 9 settings, whatever.  I did a lot of research on the web and found a file called WAIK and installed it on my laptop.  What I don't know how to use it properly.  It seems to be the solution above my head for such a beginner like me.  I guess that what I need is for someone to give me detailed instructions on what to do and once it is done where to put the file.  Just to let you know I have already copied the boot.wim from my win7 disc and the file install.wim.  I read that this file must also be reconfigured as well.  BTW, this is an original not a pirate windows disk.  Also, if anyone knows where I can just get the files already configured that would be great.  I would also like to thank the volunteers for answering my previous question.  Your solution worked great!  I don't seem to be able to get an answer here.  I clicked on the reply button, but nothing happens.  Anyway, thanks in advance for any help. I really want to do a clean install, because I'd lose data so well that I have backups I would have to reinstall to new programs too.  If you need more info, I'll be happy to offer what I can.

  You don't need WAIK (Windows Automated Installation Kit), so you can uninstall it. Run the Windows Upgrade Advisor - http://windows.microsoft.com/en-us/windows/downloads/upgrade-advisor and follow the recommendations. Uninstall your program antimalware (except Windows Defender) and run an uninstall/cleanup tool for every anti-malware program that may have been installed. List of anti-malware removal tools - http://experts.windows.com/w/experts_wiki/156.aspx and then try to upgrade.

  Jim

• How is the user interface of the browser application made...

  Stock in BB10 Navigator seems to have a bar downstairs with an overflow on the side right which, when selected opens a 'Action' Menu and then on the left, there another button that, when selected opens a Menu "tab.  Can someone tell me how it's UI is done.  This flow is possible recreated at cascades...

  Is it possible to place a text field and a button image in an action on the bottom bar?

  Thank you

  The browser INTERFACE is actually built using HTML5, so you can have some difficulty doing so in the Cascades.