How to reconnect all network drives?

Similar Questions

• Could not reconnect all network drives in Vista...

  On startup, I get the message, form the notification area: "Could not reconnect all network drives.".  How to connect readers.  I have an Epson printer connected.

  Hello

  (1) what firewall are you using?

  You are connected to a Modem/Router? If so have them turn it off for 30 seconds and turn it back on.

  Let us know if that helps.

• Could not reconnect all network drives

  My laptop is getting the message "Could not reconnect all network drives", at startup. I'm running Windows XP, service pack 3. I have a 'Z' allocated network drive, which is marked 'memory_card '.

  Must this drive be connected?

  If so, what are the steps.

  When I try to open this network drive, I get the message "an error has occurred during reconnection 'Z' (: to \\HP(serial number) \memory_card'."

  Thank you

  All of this makes sense now.

  Thanks for your help and happy new year!

  C1

• message "Could not reconnect all network drives" is an error

  I am using windows 7 Home premium, with a small local LAN supporting 3 PC.  There are 2 stores connected to the network on the LAN for backup (a device) and multimedia data archives (the other device).

  Lately at the start, I always get the message "cannot re - connect all network drives", but explore can access the network drive and view the contents of files on this subject.  the following image illustrates this case:

  

  Note see the sharing Y: mapped drive that is not connected with a big red X, even though I can access the contents of the folder of this one (pictured above).

  So next, I selected Y: and properties and got the following picture for the reader (bomb box properties coming to slightly overlap the content of the file):

  

  Now it is said nothing in the drive capacity which should contribute to this (25% of space), but pointed out that only the action get properties has managed to change the y to so-called connection not connected (but still available) by a big X red, supposed to be connected, with a green sticker on the drive icon shows now.

  These 2 images were taken less than 3 minutes apart - the timer it took to snapshot screen not connected, crop the image to remove the spaces empty and save them, and then get the properties one and do the same thing.

  The question is - why windows do this?  It is obviously not something wrong with the devices, and even when it allegedly is 'not connected' the drive mapped a share can still provide content of records of levels 2 and 3 to the bottom of the tree.

  Davidk03

  Hello David,.

  You can see the article mentioned below to solve the problem.

  Drive mapped to the network connection may be lost

  http://support.Microsoft.com/kb/297684/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• How files are disconnected and how to reconnect all the?

  How files are disconnected and how to reconnect all?

  The files are disconnected when you move, rename or delete these files (or files that contain) outside of Lightroom. Under Windows, this can also happen if the photo files are on an external drive and drive letter changes.

  If you have moved the photos, the best way to reconnect to them is to bring back them to their previous location.

  Otherwise, you must use the file-> to reconnect.

• I have an imac with time capsule - I want to save two pc laptos have the network. How to map a network drive?

  How to map a network drive, so I can save my two portable pc on my imac time capsule?
  Thank you

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308582

  It will be useful.

• How to map a network drive, such as a local drive

  I have a program (Samsung Link) that can only detect the local drives to share with my TV. I have a network drive I want to share with her, but it does not detect it (I obviously mapped it and it is visible in Windows Explorer on my Windows 7 Pro 64 bit PC).

  How can I map the drive so that it will be detected as a local drive?

  I have a program (Samsung Link) that can only detect the local drives to share with my TV. I have a network drive I want to share with her, but it does not detect it (I obviously mapped it and it is visible in Windows Explorer on my Windows 7 Pro 64 bit PC).

  How can I map the drive so that it will be detected as a local drive?

  Depends on intelligence and enforcement of Samsung Link needs...
   
  Might be able to create a symbolic link to a local folder (unused) on a local computer and it MIGHT (* could *) can fool the Samsung app.

  symbolic link: http://technet.microsoft.com/en-us/library/cc753194.aspx

  so...

  Map a network share directory, you can use this command:

  net use \\Server\ShareName

  


  Then... If you want to access the network share through a location on your C: drive, you'll want to set up a symbolic link:

  mklink /d  C:\Folder\NewShareName \\Server\ShareName 
  

  Now, when you browse to C:\Folder\NewShareName, you'll see the content of \\Server\ShareName...
   
  Perhaps IF you could point to C:\Folder\NewShareName Samsung
  (* NewShareName shouldn't exist in C:\Folder before running the command "mklink".)

• How to map a network drive to the Group skydrive

  I'm trying to map a network drive in Windows 7 on a group of Skydrive

  Hello MarkJoneslevrEdge,

  Thanks for the return of the response.  However, I do not show all of the files available from the link above.  You may need to share it, so that others can view.  I have included a link below the support of SkyDrive which I hope will help you.  Also, if you are unable to get this resolved for the link, I would say that your question from the same link below.

  Can I add my SkyDrive as a network location?

  http://windowslivehelp.com/thread.aspx?ThreadId=9e8aefc0-d0a3-43d2-8e1f-2d25537738e7

• How to remove all the drives except 0:0 "Computer1" and re - joining "computer2" all disks

  Hello

  I need to find a way with PowerCLI can I analyze virtual named "machine1" across all the disks on a computer off, and detach all disks except the system disk (0:0).  Next, I would like to re - join these discs "computer2".  Seems to be there should be a way to do this using the Remove Disk command, but I don't know how I would keep track of all the disks as Computer1 can have a different number of disks attached whenever I run this script.  Can anyone help?

  CK

  Try something like that.

  $vmName1 = "vm1.

  $vmName2 = "vm2.

  $vm1 = get-VM-name $vmName1

  $vm2 = get-VM-name $vmName2

  $hd = get-disk hard - VM $vm1

  $cntrl = get-controller SCSI - VM $vm1

  $cntrl0 = $cntrl | where {$_.} {ExtensionData.BusNumber - eq 0}

  $hd | %{

  If ($_.) ExtensionData.ControllerKey - only $cntrl0. ExtensionData.Key - or

  $_. ExtensionData.UnitNumber - no 0) {}

  $vmdkFile = $_. File name

  Remove-hard drive - HDD $_ - confirm: $false

  New-disk-hard - VM $vm2 DiskPath - $vmdkFile - confirm: $false

  }

  }

  Note that the script does not take into account the original SCSI controller, it added the VMDK to the first SCSI controller

• How can I add network drive folders to a library?

  My music and photos are on a Netgear Readynas Duo with 2 TB of disk.
  This makes them available to all computers on my home network.

  Now, I want to include music and images in my library on my new Windows 7 computer.
  Win 7 indicates records must be indexed, but there is no way to do it.
  The suggestion to make the files available offline will not work with this amount of data.

  You have any suggestions to solve this problem?

  Kermit_If,

  You can check to see if files are missing from the system permissions.

  To add the permission system in a folder

  1. right click on the folder, click Properties, and then click the Security tab.

  2. If you don't see a System under group or user names, click change.

  3. click on Add, type System in the box that appears, and then click check names.

  4. under Matching names, click System, and then click OK until all the dialogs open, you have open are closed.

  You will need rebuild the index once you have made this change.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to extract all the drives SAS/SATA and Ethernet port speed of the link command line?

  Hello

  Do you know if supports Windows OS built in order to extract all the SAS/SATA drives and ports Ethernet link speed?

  i.e. for SATA3 drive it show 6 Gbps, for DIS3 drive it will show 12 Gbps, to present the current link speed.

  i.e. for Ethernet 10 G, it will show 10 Gbit/s while the current connection speed is at 10 Gbps.

  I need the command to create a batch file to run bike test to check all connection speeds are correct in each cycle the system power runs, if the Windows operating system does not support built in order to achieve this, please send us any tool of 3rd - party with the support of the command line to do this.

  Thanks in advance.

  Jacky

  Hello

  This is a forum for Windows and you can't find the experts here, so your question will better suit in the TechNet forum where members of the community who have the expertise to help you. Check out the link and post your query:

  https://social.technet.Microsoft.com/forums/en-us/f4a3a72b-21e4-45fc-b623-eb1d99215c79/command-prompt-and-bat-files?Forum=w7itprogeneral

• How to add the network driver D-Link D-Link - network - D-Link AirPlus G DWL-G510 Wireless PCI Adapter(rev.) (C)

  Get an error code, "WindowsUpdate_8007001F" "WindowsUpdate_dt000".cannot find wireless connections, am a beginner with this, no easy option? Thank you

  Hello

  ·          When you get the error message?

  ·          What are the updates you are trying to install?

  You can see the link given below for wireless network.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/view-and-connect-to-available-wireless-networks

  Hope that information was useful

• How to map a network drive on Vista to Windows 7?

  They don't see each other.

  Please see sharing files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional

• How do you map a network drive?

  OK I have a belkin F5d8235-4 v2 router and you can put the USB and USB HDD so I installed the software for him and when I did the flash player never rises once and a while how to map the network drive I can see now and it sayes "USB" on Belkin N + (z) and I have 2 accounts the other account he does not even show all the means allowing you away!

  Here is a web link, so you can watch it - https://picasaweb.google.com/111853381961106196218/ComputerMapping

  Send me an email to * address email is removed from the privacy * if you have and question.

  Hello

  You can access the network drive mapped to other user accounts by using the credentials.
  To access the mapped network drive.
  a. Click Start, and then click computer.
  b. click network drive mapping.
  b. now to put a tick in connect using different credentials.
  d. click Finish.
  
  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map