How to record voice on SRP500 configuration

Hello

I work at an ISP, and I recently bought series Cisco Small Business SRP500. In my opinion, it works very well for small business, but I want to save a configuration file, so do not to lose a lot of time every time that I set them up for customers. If I click on "Save Configuration" in the Administration tab, it saves only the connection data, but not the voice of those. It's the same problem as Linksys WRP400, but at least with Linksys, you could save a html page and reload on new devices.

Is there a way to also save voices config, or at least Cisco works about it?

Thank you

Hi Luca,

Of course, you can retrieve the configuration in XML format, as follows:

http://192.168.15.1/admin/config.XML

or

http://192.168.15.1/admin/config.xml&xuser=admin&xpassword= if you are not currently connected.

When the XML file is displayed in your browser, right click to view source, and then save this file.  Save this source ensures that you have a configuration file that can be used to reactivate the file later.

For your information, you can also retrieve too /admin/status.xml in this way.

Hope that helps,

Andy

Tags: Cisco Support

Similar Questions

  • Really confused on how to record voice over the music, how can I?

    Hello. I have currently the adobe audition trial it just says: Adobe CC. First off I know it does not part of my question but CC is good enough or should I look for in an another verision: I'm doing the songs.

    I upgraded to audacity and am confused about the simplest thing. In audacity, that I could record through my microphone and recording listen to my music in the back, with my helmet and the record like that. In Adobe Audition, it seems that I can't register unless my entry and exit are my microphone, which confuses me too (im a beginner), the only way I can save is if my microphone is my entry and exit put then I hear nothing, I save or any music I put out there.

    I can hear the music if I switch my output to my headphones, but then I can't save... I am so confused I just want to listen to music through my headphones and save with my microphone, but I can't save it unless my return is my microphone. One thing I read was trying with multitrack, but when I open a multitrack session, the symbol of the recording fades and I can't click on it to save.

    To expand a bit on what Steve...

    Yes, the hearing is completely until you want to do and because it is a professional software, a ton more.  The problem is what makes learning much steeper than simple programs (but by limiting further).  Just to give an example, on my set up I can save 32 simultaneous sources (in multitrack) and implemented several different streams to be monitored.  With this versatility comes complexity, however, and I strongly suggest that you spend a few hours with some of these video tutorials available by searching.

    To give you a brief overview of what you need to do to get started:

    Go to the Session File/New/multitrack, set up for the bit depth and you want sampling rate, mono or stereo (probably stereo) and all that kind of thing, then give it a name.

    Go to Edit/Preferences/Audio Hardware and say audition to use your default microphone input (you may need to go to your Windows Audio control and set up there if you mic does not appear on the list of the hearing).  Then configure the default output to your computer or the headphone speakers.

    On the multitrack display, choose the track you want to record in (I'll assume that you already have a piece of music that you have open in a track) and make sure that the input source is your micro - entry is this box with the right arrow in the box to the left of each track.

    Click on red 'R' to the left end of the runway to allow registration - just the track (s) you want to save, not those with the existing equipment).  If you want to make your voice heard through the computer, click on the little 'I' next to the 'R '.  It routes your input to output, but as Steve says, your computer could introduce a latency.

    At this point by clicking the Red record button in the main transport controls should begin to register with reading going out of your computer.

    Now, it's essential, but you have a ton of options (and a ton of shortcut keys, if you choose to learn).  Why so complex for a single track?  Simply, if you record multiple tracks at once of the external speed then you should be able to tell hearing what source put in which the track.  Once get going you, you can create a model of 'session' If you want to use the same set up every time.

    Recycle than trying, but I suggest you strongly look at some tutorials for more details - and I'll second comment Steve, whatever DAW you decide subsequently, a priority purchase of an external audio interface to work around the one built into your computer.

  • How to record voice on my Dell Inspiron 15R laptop not touch?

    Hello

    I'm getting used to my new Dell Inspiror 15R laptop and I am wanting to record some audio tracks I can then download on soundcloud or youtube.  I see a jack for headphones on the side of the computer, but I do not have a microphone.  Is there a built-in to the computer?  Or I have to buy a microphone?  Can I make voice recording with headphones (like the kind you would for Skype with)?  My computer came with the built software with which I can record and edit my audio tracks?

    Thank you!

    sburdick

    Hello. There are about 4 different models that Dell sold under the generic name of the Inspiron 15R, so if you need more help, please include the complete of the laptop model name and the name of your operating system.

    All current Dell laptops have established in the PRI. Set top, right click on the audio icon on the taskbar (or if you have Windows 8, you'll need to get to the office, I'm not sure), then click on "recording devices". The sound properties will be open on the recording tab find the internal microphone in the list and right-click on it, then click on "enable", click "set as default device".

    As an option, while the micro internal is still selected (highlighted), click 'Properties', then the levels tab. This is when you set the volume level for the microphone.

    With respect to the recording software, there are very probably only Windows Sound Recorder, which is pretty bare bones. You can use it to test the microphone. To open it, type sound recorder in the search box.

    For serious recording and editing you should buy a graphic audio recording program, or download the free program Audacity. Just google Audacity.

    With regard to external policy: If there is only one socket on the laptop case, then you have one of the models with a Jack "combo". That kind of jack will not support a regular computer microphone. Catches combined work with smart phone type of headsets, which combine a microphone and headphones in one single take. You can tell if you have this kind of helmet because the connector has 4 segments instead of the normal 3 segments on a stereo plug.

    The combined catch take care of normal headphones.

    The combined catches do not support stereo plug-in software component line.

    You can get an adapter to make a combo Jack accepts a normal computer microphone, but an adapter cannot make a plug combo stereo support line snap. To the stereo line you would need an adapter usb audio that has a line-in socket - that is to say if your computer only has a combo Jack.

  • HP Slate 7 How do I record voice with the microphone

    I want to voice recording, live by using the microphone, but I don't know how to do it. Can someone help me please.

    Thank you

    Download one of the many free recorder voice applications available in the game store!

    I just tried to 'Smart Voice Recorder' and it worked very well.  (I am not affiliated with the author).  Just type "Start Recording" and go!  There's even a feature to silence 'Skip' to record the size of the record.

    WyreNut

  • do not record voices

    I can record voice via the built-in microphone, but not through my Scarlette 2i4 with a condenser MXL 3000 mic. I use this configuration on a regular basis for a few years and recorded several songs recently and everything was fine. Then the other day it didn't work anymore.

    I have preferences inside the Gargeband on Scarlett for entry and exit

    I have a lead of real instruments with active record

    Phantom power of Scarlett's gain is in place and I can see this mic signal to the Scarlett

    I hear the MXL 3000 in my headphones are plugged the Scarlett.

    I tried a different microphone, no change.

    I tried to stop everything, re-corner connections, don't reboot, no change.

    I tried the channels 1 and 2 on the Scarlett, no change.

    I tried several song files and new empty files.

    Note: There is no drivers for the Scarlett - it runs in compatible mode on Mac

    I'm puzzled. Any ideas? Thank you very much, really frustrated and can not save!

    Have you checked the settings of the Audio configuration utility and Midi?  Sometimes, the format is set to a frequency cap is not taken care of in GarageBand - there should be 44100 Hz. And check the volume sliders.

  • How to retrieve voice memos

    Hi, I noticed on my new competitor motorola that I can record voice memos and then he said 'saved', but I can't for the life of me find out how to retrieve the memo, or where it is stored. Can anyone help?

    Bernard,

    Your voice memos must be store under Menu > Media Center > music ringtones & > My sons. It will be initially named something like '1122092122 a', but by pressing the Options will allow you to rename it.

  • How to record the addresses of email on my iPad

    Hello

    How to record the addresses of e-mail of others and mine on my iPad?

    Thank you

    One way to do this is to go to Contacts and click on the sign more. You can then type a name for your contact and then press 'Add an email' to display the email field. In addition, if you are on iOS 9 on your iPad (settings > general > about and check the Version) you can add email to the Contacts directly from Mail addresses. When Mail detects a new contact it shows a small banner at the top of the message, and if you type you have the option to create a new contact or to add the new e-mail address for an existing contact.

  • How to record the line with mbp and el capitan

    How can I burn online with a MBP 15 beginning and El Capitan?

    Set the audio input of your computer...

    How to record audio on Mac OS X EL Capitan

  • iPhone'S will not record voice memos

    Hello! My new iPhone IS will not record voice memos. I can open the app very well, but when I press the record button it shakes just for a moment and then stops.

    The software is up-to-date (iOS 9.3.1), storage seems adequate (6.0 GB used, 5.6 GB available), MIC works fine in other applications (voice control, camera), so I'm not sure what the issue could be.

    Thank you!

    Try a forced reboot - after open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

    Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

    If this does not work

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

    In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

    Only by exporting - with Photos (and iPhoto and Aperture) - you can have several versions of an image by duplicating the image (control - D), but this does not create an image file separated until you export - it creates a separate edit list in the database that applies to the original when you watch or export the photos

    Photos as it were its predecessors is a non-destructive control Digital Asset Manager (DAM) which does not any changes to files in the database but built a list of validation

    LN

  • Qosmio F10: How to record audio and video and use QosmioPlayer

    I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

    The questions are:
    1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

    2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

    3. I only use VIDEO IN to WATCH is not to save: where is my fault?

    Thanks, Marco

    Hello Marco

    I did some testing and I can tell you about my experience on Qosmio G20.

    1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

    It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

    I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
    2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

    Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
    3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

    Good bye

  • How to record from Apple Store invoice in the office?

    Apple Store Canada, I bought a backlit keyboard Logitech CREATE for my iPad Pro - in order to register my product with them that I need to download the invoice and all the Apple site offers is to print it.

    How to record on my desk, preferably in a .pdf file?

    Well, to answer my own question, it is not directly possible, unless you have Windows 10 and then you can print to PDF which would open the Bill in Acrobat Reader or DC or something else, and then you can save it.

    There is a free application that you can download on other systems.  I shouldn't advertise, but it starts with the c Word and ends in pdf.

    Who is achieving the same goal.

    Of course, the best response of all would Apple allow to record the invoice directly in PDF format.  Which shouldn't be too difficult for them to do, no doubt?   In hindsight I see that this has been a perennial question.   Sorry I can't offer any suggestions for Mac or iOS that I don't know if there is.

  • How to record video in or of port S-video on Qosmio G40?

    Can someone tell me how to record video or S-video ports, because I tried the Ulead DVD factory program and only capture device, he could see was the webcam, and he did capture her

    After that, I downloaded the file to update provided by the support Web site
    That the program could see the devices are the TV tuner and the webcam (which he could not access more for some reason any)

    After that, I downloaded a more recent update simply is identical to the last updated and seems that someone in the support Web site made the link to the new update which they do not have to file the previous update that doesn't really matter.

    Hello

    There are 2 ports s-video; s-video output port is not designed to pick up signals from an external source. This port name says it all; It s an OUTPUT port!

    S-video-in port must be placed on the right side of the laptop. Don't mix the two ports. But note; This port receives only video signals. To hear the sounds, use a video cable to connect the audio terminals of the device and your computer.
    Red: audio right channel
    White: channel left sound
    The Ulead DVD Movie factory can be used to capture this signal.

  • Satellite A300 - how to record audio from Internet?

    Hello world.

    My friend has a Satellite A300 and wondered if someone knows how to record music on the Internet. Any help appreciated Toshiba experts

    Hello

    Personally, I don't do any music recording from the internet. I download if I like it. You can do a Google search and find a software to record either by the way, I found an article from the Toshiba support page:

    http://APS2.toshiba-tro.de/KB0/TSB8A02HA0000R01.htm

  • Satellite L300: How to record the sound from a video without sound

    OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

    On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

    I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

    Does anyone have a solution of how to record sound with the speakers on mute?

    Hello

    I also recorded the audio of a video file using another software called 32. and Win XP
    I also used the stereo mix, but to be honest I have never muted the speakers while recording.
    To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
    But as I said, I've never tested and that's why I m not very good if it will work.

Maybe you are looking for

  • HP mini computer: fatal error

    I'm having this same problem fatal error... System. CNU937DWZ9

  • password for a user

    Hello I'm looking to bulid password for a user in a position to confirm the password, also able to change his password if he needs. Thank you Florent

  • MS Money

    Original title: help!   I really need some help here! I have MS Money 2003 and I have archived instead of making a p/c.   Please tell me how I can get my unpacked file! I hate spending the money for a new copy of money because of this.  Any help appr

  • Maximum memory Prssario CQ56-100-ED

    This product comes with 2 GB of memory on a unit of DIMMS. The product specification is said a maximum memory capacity of 8GB. However, the laptop has 2 slots for memory units. If I look for the available memory of DDR2 memory units to see only up to

  • How can I access the system tray when it is disabled on the public computers?

    Hi all I'm trying to access the icons on the test system such as: 'Remove the device safely', but I also try to access the other icons that would show in the system tray icon on the taskbar, when I plug my USB key into a USB port. The problem is, the