How to recover only drive C on a Satellite P200-1FJ

Similar Questions

• Re: Satellite P200-1FJ - LAN driver for Windows 7 64 bit

  Can someone help me with the LAN driver for Satellite P200-1FJ? I have Windows 7 64 bit, when I ask for this driver in the toshiba site, reed "Sorry we couldn't find drivers corresponding to your search criteria."

  Hi legiadb,

  The drivers, you can download here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  As you've probably seen, there is no 64-bit Windows 7 driver available, so I recommend you test a 64 bit Vista driver.
  It works on Windows 7?

  Solution check the Realtek page directly ;)

• Wrong driver BIOS on my Satellite P200 (PSPBG)

  I have download a bad WOOD driver on my laptop. This make the window that appears at the opening of this one and when I tried to download the update, he said that it was an error to execute. As the update is not for the current driver to use.

  I therefore call for this driver to download and how to make an update for it.

  There is also another issue: the 'FN' key does not work before what happened to WOOD.

  Waiting for your help.

  Hello

  I'm scared of m I didn't understand your question exactly.

  You said that you downloaded a wrong BIOS driver? :|
  I assume you mean the BIOS.

  The European Toshiba page provides BIOS for Satellite P200 (PSPBG).
  I checked the page driver and now the BIOS version 1.70 - WIN is available which was released on 13/09/07

  This package contains a setup.exe. You can start the update of the BIOS, run this file.
  But please the following:

  -Portable is in stand-alone mode.
  -Laptop is plugged into the mains.
  -Laptop computer must be in boot mode and not recovery mode.
  -Remove all PC cards.

  That s is very important to make sure that the BIOS update would work.

• How to recover only to C:\

  I tried to find a similar topic in the past, but I didn't so I ask everyone here:

  My Qosmio is partitioned into 3 Partitions. After 1 year of work the system grows slower and slower. I'll try to get a new system since the restore CD but I rather wouldn t upward two more large partitions flirts and would recover rather than C:\ instead (it is large enough).
  Does anyone know if this option is available or a complete removal of the entire disc is inevitable?

  I´ll greatly appreciate every response!

  Milen

  Hello

  I can confirm this message.
  The restore CD contains installation modes.
  1. standard mode and 2. expert mode

  Expert mode and standard mode the whole HARD drive formats only the partition where the OS is installed.

  PS: I really recommend to use the advanced search. Here, you can search for expert mode and you will get many examples of solutions

• H8-1534 how to recover hard drive again

  PC is h8-1534 envy... Hard drive died bought new drive and hang it up, started to recovery cd. The cottage 5 options to chose the recovery, and it happened to 3 options... (1) collect (2) Backup (3) contact support. 1 and 2 were not high informed only contact support who since there no OS on hard drive, anyway he said out of paperwork for support. I tried to click on them in any case, but nothing. I went to the Bios and new drive was there, but really no option for me.  Rebooted and same a lot, so I took another option to reset the PC, but it didn't of course. I don't know what to do.

  I was told on the HP forum I couldn't great reader, but not smaller, and since the 2 TB was less expensive $$ then 1.5 I bought it.

  New HD toshiba 2 TB sata 3.0 7200 RPM

  "Former was Seagate 1.5 to" ""

  Thanks for any help Ken

  Hello

  You were already using successfully your HP recovery discs before this instance? The new HARD drive is connected to the same port SATA (SATA0) the original HARD drive was connected to?

  HP sold this PC in two geographic regions: the USA and the France.

  The number of product of the USA is Envy h8-1534

  The number of the French product is Envyh8-1534ef

  The USA product offers a DVD Recovery Kit four Win 64 8 build No. 13NA1RR8601. This build number should be located on the bottom of your Tower. No recovery kit is available for the number of French products.

  If you have a h8-1534 then a recovery kit is available here.

  You are under warranty? Contact HPfor replacement HARD drive if you are in warranty. I bought four HP from the PC to the HP USA Store and all have come with a two year warranty.

  Explain your problem with recovery disks, you did. HP support should be able to help. HP will support your PC with all the components in stock.

  Jaco

• load a second XP on my computer and then deleted. now my HDD has been split into disc 1 and disc 2 (not partitioned - split) any IDE on how to recover the drive like one?

  • Had a non legitimate copy of xp so I bought a legitimate copy and tried to load it on the former, but he wouldn't.
  • My computer is configured to dual boot with win98, then from 98, I loaded xp.
  • I thought that maybe if I started 98 then loaded the new xp from there he would charge ok. Which he did. But being the dummy that I am does not he would not recognize one of my other programs that have been installed in the old XP. So in my frustration I just deleted it (I don't think I uninstalled it for some reason any) in any case, I found that I could load some codes from microsoft that allowed me to get into the new xp on my old xp product code and it worked fine.
  • However, when I looked at my hard drive I have now disc 1 with 98 and xp on disc 2 (which is the majority of my 400 gig drive) with nothing on it.
  • I tried partition magic, but it won't do anything because it is not a partition.
  
  
  Sorry for not providing them.

   

  According to your post, it sounded to me like you've had an idea about the console recovery.

   

  Here are the steps.  also run a disk check while add you it:

   

  you start the computer with the xp cd you have.

   

  then in the first screen, select R for repair.

   

  This will then start the recovery console.

   

  at the disc prompt, run the following commands >:

   

  CHKDSK c: /r

  bootcfg /rebuild

  Fixboot

   

  then the output, remove cd and you should be able to start in the original installation.

   

  either by the way, when you run bootcfg he might ask you for information.  everything you enter can always be changed later via Notepad.

   

  In addition, if you receive an error message following on the master boot record, and then run the command again via the recovery console fixmbr.

   

  Finally, you mentioned the creation of another drive.  It is perhaps a good thing, but it depends on how much space you will be assigned to the.

   

  If after you start, check the disk space for each drive and let us know what they are. Ok?
  --
  db·´¯`·...¸><)))º>

  .

  "whizznot" wrote in message news: 589d242a - 083d-4422-9f2c-1398d7a1fd2b...

  I do not know how could you give me more details

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• How to unzip the driver for XP on Satellite A300 SATA?

  Hello.

  I want to downgrade my Satellite A300 from Vista to XP.
  For this I want to integrate the SATA XP driver in a new CD of Windows.

  My question: How can I decompress the *.exe file in the specific files that I need to install the driver?
  Or is it possible to integrate the *.exe file in the CD without unpacking?

  Hello

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme!
  Read it!

  Good luck

• How to recover Windows 8 on my laptop satellite?

  So last night my laptop, a Toshiba satellite running win 8, decided to have lunch there himself with a random reboot. I didn't drop it hit or give him any reason to complain about how it is noted.

  Upon restart, it got stuck in the apparently very well known diagnosis/repair of problems fast errors drive loop. I left it overnight to do its thing, which, by this morning, turned have been absolutely nothing.
  I've since come around forums trying to find out how to access some sort of fair recovery menu start from the place with a new resettlement.

  So, as I've been led to believe, is possible either by holding 0 at startup for a menu of recovery, either through f12 for the boot menu. Both are readily available, but unfortunately completely useless. I selected the option to access the recovery menu and was rewarded by the return of the laptop it's repair loop. I selected the option no and it turn off the laptop.

  If someone could advise me what the next step would be to get this traffic rights thing still once, I would be very grateful, because it seems now I'm out of options before buying a new hard drive and windows 8.
  Thank you in advance and also, I'm sorry that I broke the golden rule to search for and join an existing thread first not. I am literally pulling my hair out on this subject.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  You will find explanations on the recovery and repair. Try to reinstall the original recovery image and test the feature with the factory settings

• How can I recover a drive partition?

  I had problems with spyware and I thought I was restoreing to a point earlier, but really I partitioned the drive. How to recover the drive? Vista Windows

  Hello

  you have deleted the partition?

  you reinstalled vista?

  You cannot cancel that

• How to recover the complete installation of NDK IDE SDK?

  I just downloaded the gold 10.1, my NDK 10.0 and 10.1 in the same place. I have not updated my device and the IDE does not compile because the target device has older software.

  Now, I want to know how to recover the SDK outside of a full installation of QNX IDE. I just need an IDE if I could use several software development kits, and the IDE itself must have consumed a lot of HARD disk space.

  I like to keep the SDK installers so I can install them even without an internet connection (if I have to in the future). Someone can tell me how to recover (only the development kit) SDK full QNX IDE install and use with IDEs installed?

  I noticed that in the advanced SDK properties, there are two folder paths: Tools SDK and the Platform SDK. Can I copy these two files and use them also?

  If you still have the copy of the previous version of the sdk (two files 10.0 installation directory, host_10_0_10_536, and target_10_0_10_672 example), and if you are on Windows 7, you can copy these two files to the 10.1 installation directory and go to C:\Users\\AppData\Local\Research In Motion\BlackBerry Native SDK\qconfig and play a bit with .xml files that match the target sdk 10.0 (just in) change these two folders location paths).

  If you do not have a copy of them, the best solution is to click on the refresh icon and install the sdk that corresponds to your os from the target device.

• WXP need display driver for Satellite P200 (PSPB6)

  Hello

  I can't find the display driver for Satellite P200 (PSPB6)!
  I have installed Windows XP Home edition, downloaded all the drivers, but why is there no display driver for Windows XP Home edition?

  Can someone help me with the problem? I googled for hours.

  Obnoxious

  ATI driver display for your Satellite P200 (PSPB6) you can find HERE

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• How to restore only the Bluetooth driver?

  How to restore the only driver of bt to the installation of a default constructor (windows 7 64-bit) or the path to the installation because it was made by the manufacturer?

  All you can do is remove BT driver/software from your computer, restart it and after doing this version the most recent installation of Toshiba support and download page.

  I don't know what model of laptop you have, but if you have the European model visit please http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• How to recover an Xbox Live account with knowing only the gamertag?

  How to recover an Xbox Live account with knowing only the gamertag?

  How to recover an Xbox Live account with knowing only the gamertag?

  Hello

  You will need to contact XBox support for these issues.

  Directory of Xbox Forums - Xbox.com: http://www.xbox.com/en-US/forums

  Contact us - Xbox.com: http://support.xbox.com/en-US/contact-us

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Xbox LIVE content help - Xbox.com:
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/purchase-Xbox-Live-content

  Billing and subscriptions - Xbox.com:

  http://support.Xbox.com/en-us/browse?product=billing-and-subscriptions

  Concerning

• How would recover my photos from my old hard drive?

  Original title: Please help.
  How would recover my photos from my old hard drive? I have the old and the new hard drive in the Tower?

  Reach... Start / /My computer... and you must
  See the drive letters for the two hard drives.

  Just copy / paste... old record again.