How to recover programs that are lost after using the software Ccleaner.

Similar Questions

• How to uninstall programs that are not listed in the file of control panels?

  I want to uninstall windows defender and norton, so I can install another security system and they are not in the control panels uninstall file.

  You cannot uninstall Defender; It is a part of the Vista operating system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  For Norton, download and run the above Norton removal tool.

  See you soon. Mick Murphy - Microsoft partner

• Now that the utility install cleanup is no longer available, what are my options to uninstall a program that cannot be uninstalled using the standard method?

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  Revo Uninstaller (free): http://www.revouninstaller.com/revo_uninstaller_free_download.html

  The MS Installer Cleanup Utility is available at http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html , that it is a safe to download site from.  Based on warnings from Microsoft on the cleanup utility, however, you might well advised to make a backup disk image or at least a backup of the registry before using it.  C:\WINDOWS\ERUNT is an easy to use free registry backup tool.

• My VISA card has been cancelled. How can I pay Adobe and continue you use the software CC?

  Your credit card may be cancelled cause of lost or stolen?

  For me, it was just a mistake of my Bank... Well Yes, it can Alosso happen.

  Here's the point: my credit card is unsueable so Adobe can't receive money, and I need more two weeks to receive another card.

  So, is there a way I pay Adobe (maybe the transfer) and continue you use the software great CC?

  Thank you!

  Arthur

  Hello

  I see that you have an adobe under the same email account as with the forums.

  I would go you through the link below for more information billing, please go through the last segment that reads: restart an inactive subscription

  Renew, restart, or extend your Adobe Creative Cloud membership

  Hope this helps!

• How to recover programs from windows.old after reinstalling windows vista edition Home premium

  I had to reinstall windows - all of my previous programs seem to be in a folder called windows.old, but they won't work here.  How to restore these?  In particular, I would like to recover my old Windows Mail settings and files and also norton antivirus.

  Here is the procedure to retrieve the data from Windows.old: http://support.microsoft.com/kb/932912/.  You can't recover programs from windows.old - which is not possible.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove services that are no longer used.

  Hi, I have a lot of services on my machine, 200 to be precise. Some are running, and some are in a stopped state. My machine starts at a reasonable speed, so it's not a problem. But after the start and after all the noise of caching calmed, I used up to 3.5 on 16 GB memory. I guess that a lot of this memory is consumed by unnecessary services running.

  So is it possible to remove some of these services without having to reformat my HARD drive? And with them cripples my vital 3rd party software?

  If you are referring to RAM and use only 3.5 GB on a total of 16 GB, you have nothing to fear.  You won't win any show by mucking around with services.

  What exactly do you hope to achieve?

  If you really want to disable some services - not to "remove" their - go here and then go to the page corresponding to your version of Windows--> http://www.blackviper.com/service-configurations/

  Before you do anything, however, read all the documents text at the top of any page reach you, including the Introduction, Notes for a computer more happy and user and the explanation of table header.  Read also How to install or uninstall services in Windows 7?

  The preceding two paragraphs and related material only relate to Windows services.  If you have services installed by 3rd party programs, let alone unless or until you uninstall these programs.

• How can I recover my documents and photos after using recovery software?

  Separated from this thread.

  Dear bro

  Today I use lenovo with window 8.1 g50. I used a key to lenovo recovery software and nt could back up, I lost all data and now it's completely new and fresh window. How can I recover my photos only and documenets. Immediate NEEED help please.

  Hi Arif ullahkhan,

  Before I continue with the troubleshooting steps I may need a few more details to better understand the issue.

  1. did you reformat your hard drive during installation?
  2 have. which edition of Windows 8.1 you installed?
  3 Windows operating system you were using before?

  I suggest you try the procedure described in the article and see if it helps.

  How to recover files from windows. Old folder

  http://Windows.Microsoft.com/en-us/Windows-8/restore-files-upgrade-Windows-old

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Create signals that are customized by using the spreadsheet of settings.

  Hello

  I'm quite new to LabVIEW but I have a complicated program to create. This framework requires a waveform from a spreadsheet of settings, attached.

  I have attached a chart of the appearance of the waveform. As you can see the different parameters related to durations and amplitudes of the wave as well as the frequency and the amplitude of the sine wave in the middle.

  In addition to this the program must travel creating each waveform in succession that the values in the change of worksheet for each different test.

  I managed to read the file in spreadsheet, make a chart from this and then I tried index table online to send to a loop for which would go through each test, but I don't know how to create the waveform of these values. I have tried to use the labView signal generators to create individual sections of the wave but struggled.

  Thanks for any help.

  Combine the GERD and my suggestions.  I had not used the Signal generation pallet front screw, but they manage most of the "math" for you.  The key step, you have to decide is what interval to use for "dt", "quantum" time, usually the same as the sampling interval.  Looking at your picture of waveform, you have a pulse, a ramp, a series of sinusoids, another ramp and a final push.  When you look at an individual Palette, it has parameters "dimensionless" you need to adjust to your particular situation.

  Consider the ramp time T3, starting at V1 and ends at V3.  Assume that your sampling interval is "dt".  You samples, end, thread and start entries in the ramp model based on the samples as follows:

  • samples = T3 / dt
  • end = V3
  • Start = V1

  Since you continue where you left it, I think that you do not want to "exclude the end?" thread true (to avoid double points), but I could be wrong on this matter.

  To the sinusoid, you have need samples, amplitude, phase and cycles.  Samples is again the total length of the sinusoid divided by dt.  The amplitude is one, phase is 180 (notice that your sinusoid starts negative), and cycles is however several cycles you want during the period of the sinusoid.  This sine wave, however, will be about 0, so you will need to add the offset constant V3 on the table.

  After having assembled all the pieces of this wave form complex and are concatenated berries resulting from it, have to turn them into a proper waveform.  Drop a wave function of building on the block diagram, drag to the top of its upper part a 'click' to expose dt and wire in dt and your table (Y).  You now have a good waveform.

  Bob Schor

• R12.2.4 data lost after using the dialog Page and return to the calling page. (Help please!)

  Hi team,

  I'm new to OAF and works on a requirement to add some custom validation when the user clicks a button in a seeded standard page.

  The approach I took was to extend the seeded controller object managed this press event button and put my custom logic in the extended controller and substitute the standard controller through customization.

  The standard rate which was pressing the Complete button A Page, the user was taken to the next and epepinee page (Page B) some operations based on records that have been chosen Page A.

  Part of the custom validation requirement that was if some postings were not met, the user must be a pop-up asking if they really wanted to move forward and if they have selected Yes then continue with the seeded standard flow (transition to page B) and if they have NOT selected then just remain on the current page.

  I have used OADialogPage and to do this, in part, the question , I am running into is that when the user selects one or more records using a check box in a region of several record (table) and click the full page and if the validation fails then a modal page and the user made a selection i.e.either Yes or no modal page and when they return to the calling page (ex. Page A), all data (records) they chose previously is lost (the Page is refreshed). Based on what I see on this forum, I suspect it's because after having click Yes on the modal page and then return to the original page the processRequest fires again and the VO data is queried again and has all the parts on the page are lost. Since I am changing the flow in seedlings pages based on the intervention of the user I'm confused as to how this problem can be solved. that is, prevent the page refreshes or preserve the selections that were made before you navigate to modal page. Any help is really appreciated!

  My Code:

  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean)

  ...

  ...

  If (oapagecontext.getParameter ("completeOps")! = null) {}

  ...

  ...

  If (warnCount > 0) {}

  OAException message = new OAException ("not in order...", OAException.WARNING);

  oapagecontext.putDialogMessage (message);

  OAException message = new OAException ("XYZ Violated rule. Do you want to continue? ", OAException.WARNING);

  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, message, null, "","");

  String Yes = oapagecontext.getMessage ("AK", "FWK_TBX_T_YES", null);

  String number = oapagecontext.getMessage ("AK", "FWK_TBX_T_NO", null);

  dialogPage.setOkButtonItemName ("ConYesButton");

  dialogPage.setNoButtonItemName ("ConNoButton");

  dialogPage.setOkButtonToPost (true);

  dialogPage.setNoButtonToPost (true);

  dialogPage.setPostToCallingPage (true);

  dialogPage.setOkButtonLabel (yes);

  dialogPage.setNoButtonLabel (no);

  oapagecontext.redirectToDialogPage (dialogPage);

  }

  If (oapagecontext.getParameter ("ConYesButton")! = null) {}

  Write Yes button Action code

  oapagecontext.putParameter ("completeOps", "Continue");

  }

  If (oapagecontext.getParameter ("ConNoButton")! = null) {}

  Write the code of the Action for the No button

  Dim errormsg = ' rule Violations have occurred. "

  throw new OAException (errormsg);

  }

  super.processFormRequest (oapagecontext, oawebbean);

  }

  I managed to work around this problem by adding a simple control in my controller processRequest method extended to avoid the call to super.processRequest incase lhen control returns to the page once the user has made a selection on the Page of the dialog box

  If ((oapagecontext. (GetParameter ("ConYesButton") == null) & (oapagecontext.getParameter ("ConNoButton") == null)) {}

  super.processRequest (oapagecontext, oawebbean);

  
  

  }

  
  

  Thank you!
  

• Muse CC 2014 cannot save the programe of work/close after using the function "FTP host download"

  Hi, I'm new and try the 'Upload to the FTP host' function yesterday and encountered this problem.

  The files got uploaded, published on the site immediately... but Muse seems to screw up a bit after that. I can't save my file as I am only left with file > open recent element and a few others not. I tried to close the program, he asked if I want to save the file. I clicked 'Yes', but he has not saved. The program did not close either. I have to close the program via the Task Manager.

  My assumptions:

  -This has happened after that I used the 'Upload to FTP Host' option.

  -J' I checked on the task bar, there is an icon "edge CC inspect." I don't think that it works because it is not installed on my computer and the options just brings me to the Adobe download page.

  -Prior to this, I downloaded Flash Builder Premium, but I used it just that I realized that I need to write the code that I suck at... so much that causes the crash?

  Google and realized there was a similar, but unanswered thread in Adobe communities.

  Someone help? This is a very handy feature that I like to use...

  Hello

  in case you always get this question

  Please download the http://muse.adobe.com/assets/ftp2014fix.zipfile, unzip it and save the figure ftpPrefs.xml file to the following location:

  On Windows: %appdata%\Roaming\Adobe\Adobe CC\2014.0 Muse (you can type in the path bar at the top of the Windows Explorer window)

  On Mac: ~/Library/Preferences/Adobe/Adobe CC/2014.0 Muse (you can type in the dialog box go to the folder by using shift-command-G)

  Muse uses extended FTP Mode Passive (EPSV). This is the preferred mode for optimal performance, but we find that some hosts have configured FTP servers such as EPSV is not supported or EPSV only works if you are inside the firewall as well as the FTP server. The ftpPrefs.xml file that precedes, turns off EPSV mode. So if this is the problem in this case, implementation of this file should allow you to properly connect and download without errors.

• After downloading the recovery "Disk Drill" software it installed an SSD SM768E monitoring program.  I have not used the software "Disk Drill"

  A SM768E of SSD monitoring program is running on my computer.  It appeared after I downloaded, but did not use the file "Disk Drill" and deleted recovery software.  I can't get rid of the monitoring software SSD.  Spin El Capitan 10.11.5 on a 16 GB MacBook Pro retina with processor Intel Core 17 2.7 GHz.  By clicking on the icon tells me to go to "Disk Drill" but its been deleted.  Can I temporarily stop the control, but it starts every time I put on.

  http://help.cleverfiles.com/how-to-uninstall-disk-drill/

  You may need to install the SD to remove it completely

• I would remove the list of Web sites that are allowed to use the flash

  I must have accidentally given permission to youtube to always use the flash.
  If youtube uses Shockwave flash, the video will be stuck at 14sec and then it takes anywhere from 10 seconds to 10 minutes to continue playing the video however if I disable completely the Shockwave Flash in the tab modules video will play without any problem

  You should see the permissions that are not by default in the pop-up window if you click on the identity of the Site (globe/lock) button on the address bar.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

• How to close programs that are running in the background and what services are safe cut

  under windows xp with sp3, I hear something running in the background, but no photo with her, how I close it, also how do you know which windows services are safe to clog then start and stop can be a little faster?

  For performance tweaks that I would recommend looking at http://www.tweakxp.com/performance_tweaks.aspx they have a great compilation of good settings you can do and more are step by step, so even the most novice person can perform these tasks. Insofar as something running in the background of his always possible, you have some kind of malware running I want to run a scan for these emissions.

• How to remove programs that are not in the folder "programs". Especially must delete Incredimail and Blekko other programs.

  I would like to uninstall programs Blekko like Incredimail and others.

  Hello JEFoulke,

  In addition to information from SC Tom, you can try the uninstall from the FixIt Solution Center:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If this does not help, you can search the Internet for programs uninstall 3rd party software.

  Let us know if that helps.

  Thank you!

• How can I quickly turn in selection after using the pen tool?

  Is there a quick key/s to make a selection with what I come with the pen tool?

  I don't know if there is a keyboard shortcut, but I created an action to do and then assign one of the function keys to this action. I wanted a 1 feather px on my selection, that's why I've included that in the action as well.