How to reinstall windows when the winows dvd is lost in windows vista and the hard drive is broken

Similar Questions

• How to reinstall windows 8 in new HARD drive using the old product key?

  Mr President.

  One of my clients purchased a new HP Envy 6 - 1150ex running integrated windows 8 64-bit a month ago. Unfortunately the HARD drive broke down by the improper use and must be replaced. I replaced the HARD drive, but I can't find the product key original of the laptop unless you have small windows on the laptop sticker. given that I don't have the recovery for the same model disk how can I install the genuine windows 8 manually by using the product key? where can I find the product key?  Please help me.

  Kind regards

  Yoyo

  Hello

  Should be no problem at all if you use the version of Windows 8 EVEN because the product key is now embedded in the BIOS of the machine. The process is to get the right installation of Windows 8 media (DVD, USB, downloaded file) and then install on your client computer. No label/sticker more for all new machines with Windows pre-installed 8.

  Please see the following link for more information.

  http://www.ZDNet.com/will-BIOS-embedded-Windows-8-product-keys-cause-reinstall-troubles-7000008226/

  Rehards.

• Pavilion p6230y: how to reinstall Windows on a new hard drive

  Hello

  Recently, I had a hard drive failure. The drive is about 7 years so I understand he lived a life busy for a long time, and I plan replace it. Unfortunately, I wasn't able to make the recovery discs and I don't have a windows CD, because it is installed on the disk hard when I bought the computer. If I had to buy a new HARD drive, how would I reinstall Windows on it without re-purchase a copy? I was told there would be a product key on the chasis somewhere but I couldn't find the model and serial number for the bureau, nothing to do with Windows. I also searched HP website to see if I could order recovery disks, but this option is not visible anywhere. Help, please!

  Thank you, Alex.

  Alex, welcome to the forum.

  Unfortunately, because you did not the system recovery media when you bought the computer, you will need to buy a full copy of Windows 7.

  Here's a guide to help you try to order the HP discs.  However, I believe that it is very unlikely that they are always available from your computer is more than 7 years old.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• How to reinstall windows audio and endpoint windows audio

  Original title: I don't know what is my audio device by default? What it should be for Windows XP Professional. How can I reinstall windows audio and windows audio endpoint

  I deleted the files from my computer. They are not in the trash. It is empty. I need to know what is my default audio device and how to reinstall windows audio and windows audio end point. Help, please!

  Hi ring Racoon eyes,

  ·         What files do you mean?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  For reference:

  How to update a sound card driver in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/166774

• How can I reinstall windows from my old hard drive on a new solid state drive?

  I'm considering buying an SSD and want to reinstall windows from my original hard drive (there is only a recovery partition on the original hard disk and no drive of the Windows operating system).  Anyone can guide me through the process or do I buy a new copy of Windows.

  Hello

  You can create a recovery from your old hard drive disk, or you need to contact HP technical support and order the part or click on the link given below on a command line drive by yourself.

  Create a set of recovery disks operating system

  Order of the recovery disc for Windows 7, Vista or XP

  
  

  
  

• Windows vista 683 gb hard drive full of only the dates, how can I clean it? Fixed thanks

  Windows vista 683 gb hard drive full of only the dates, how can I clean it? I have 9 GB of free space. PC still allows me to watch Netflixs. Cool

  You are welcome.

  See you soon.

• I reinstalled Windows Vista and now I can't run "repair your computer".

  I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on.

  original title: activation problem

  -I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive.  He is now not letting me turn it back on.  What should I do?  I don't want my computer or Microsoft thinks I use a version of Windows

  It is Windows 7 Home Premium, and I my here in front of me activation code.  But it is to say that it is not valid.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• How to install windows on a new hard drive

  I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

  OT:

  Windows 7 home premium edition

  You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Re: How to reinstall windows vista on my Satellite L300

  I need to reinstall windows vista on my Satellite L300 because of a problem, I had with it (the computer does not start and the recovery option does not work). It has not come with a windows CD so how can I reinstall it?
  Do I have to get a CD by myself and if so - what version of windows vista is compatible with my laptop?
  (I can not contact the provider because I is not guaranteed).

  > It came not with a windows CD so how can I reinstall it?
  You had an option pre-installed on your laptop that you helped to create the recovery disk. Seems you didn't create this disk in the past

  Well, in this case, you can order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Tecra M5: How to use the HARD drive password when the HARD drive is connected as an external device?

  I have a Toshiba Tecra M5 with MK1032GSX hard disk. I put a bios password and HARD drive password. Every day I turn on my laptop with my password a number only once: unlock the disk and bios. The password screen is before windows starts.

  One day my laptop motherboard is broken, I bring my pc on the Toshiba support center (less disc) and I'm waiting for him (2 months ago). I need to read my date of the disc, but it is locked by password. The drive is a SATA drive, I put it on a desktop computer and I see it in the bios and in windows resource device, but I do not see in the Explorer.

  None of the software I've tried (HDD unlock, atapwd...) will not work. I have my password, I have not forgotten.

  How to read my date? Can you help me?
  Thank you.

  Hi Oscar

  Hmmm I m not 100% sure, but I think that it s not possible to remove the HARD drive HARD drive password if you haven t your laptop.
  I know that if the HARD drive password has been set the HARD drive is not more accessible and more usable.

• How can I reset Windows Media Player to use songs on my external backup drive instead or in addition to the songs on my desktop with Windows Vista Edition basic hard drive family?

  How can I reset the Player Windows Media in Windows Vista Home Basic to use the songs on my external backup drive instead of (or in addition to) the songs on my desktop hard drive?  Currently, the Media Player library indicates that the hard drive (C:\) is my only option of disks to use for sources of songs.

  Basically, I want to have Media Player external drive for all the songs from research and build his library on this disc instead of on the C:\ drive.
  My problem is that the songs are hogging too much space on my hard drive, so I want to move to my external drive to backup instead, but Media Player will not access it.  I saw an option in Media Player to add a song to a different drive to the library whenever I play a song of this player, but that would require me to play all the songs moved one at a time, which is not practical, and which would not solve my problem because Media Player could still be maintaining the library on my HDD to say.
  Any ideas?
  Thank you.

  Hello

  See the steps in the following article on how to manage the music library.

  Add items to the Windows Media Player library.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

• Reinstalled windows vista and cannot connect to the internet.

  OK, so I have problems with my computer (model Emachine) and ended up having to reinstall windows vista. Windows works fine, even if I can't connect to the internet, because it does not recognize my modem, or my modem is suddenly not there. I am also running switched. If I have to download a driver, so I have to be online to do, so I'm in a catch 22. with little money and no way to get there.

  I really need this computer to work, so any help would be appreciated.

  Read my response: download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  You should be able to download/save files and copy them.

  http://www.eMachines.com/support/drivers.html

  For any further information, reinstall the drivers, contact the manufacturer of your computer to the link above.

  Mick Murphy - Microsoft partner

• How to transfer windows on a new hard drive

  How can I transfer all my system windows on a new hard drive

  Hello

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought, if you decide in different ways:

  1. If vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

  _________________________________________________

  and read this on how to back up your data and also make a complete pc backup

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Out of the blow of sleep when the HARD drive password used on Portege R700

  Hello
  I just got a DLI R700 with Win 7 Pro 64-bit
  I have a very annoying problem because it must be plus 1 minute to accept the password after the resumption of the mode standby. It would be faster out of the hibernation!
  So he wakes up from his sleep in a second, then you can enter the password without any problem but you just can't click on the arrow or press on enter up to what more than one minute. Similarly, it will accept even fingerprints directly at the exit (you get the green check mark) after wake but then expects just over one minute to move in the opening session on the desktop screen.

  Through a process of account, I worked on what was going on...
  Only, it crashes when you have the password on resume from sleep. CV password sleep turn out and he throws back in Office windows in seconds of wake
  This does not happen to resume from hibernation or reboot - scan of fingerprints or password is entered, then goes right into the office in a few seconds
  I started uninstalling software fingerpint, vap, power, toshiba - nothing always security management the same. Then I realized the password HARD drive - which was defined using the security of Toshiba and deleted using the same, has been still enabled in the bios. I have this off and everything works fine. I reinstalled the vap, power management and fingerprint software and everything is always very well, so it was defnitely the HARD drive password.
  Now it's really fake I want to have a RESUME from sleep password and HDD password protection - I have to choose between one or the other, unless I want to wait more than a minute each time he wakes from sleep which is a real pain! So it's clearly a bug in HARD drive password settings, probably in the bios? I have the latest BIOS installed.
  Any ideas on how to get this sort?

  Does anyone else have this problem with be either 32-bit or 64-bit. Or everyone doesn't have this problem, that is to say that they hear HARD drive password AND he wakes with password ok in a few seconds?
  Thank you

  Post edited by: bullerd

  Hey Buddy,

  It's really hard to say something about what I can only say that I can t noticed this problem on my Windows installation.

  By the way: you are using the version Windows from Toshiba or your own installation of Windows?

  Theoretically, it could be a problem to install Windows or disc itself are you able to test another installation of HARD drive or windows that you can make sure it is not a software problem?