How to remove a connection high speed

How to remove a connection to wide band? I can't understand how to remove someone can help?


I also suggest you to remove all the network connections on the Network Center and sharing. Once done, restart the computer and create a new network connection and check if that helps.

See the link below to disconnect the network connections.

Also contact the ISP for more support.

Hope this information is useful.

Tags: Windows

Similar Questions

  • I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

    I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available


    I suggest you to follow the steps in this link and check if it helps:

    It will be useful.

  • Message: This device can perform faster if you connect high speed USB


    I have a laptop Toshiba Satellite 2009 of Vista.
    I just bought a multimedia design Memup Feel of the disc hard 500 GB.

    My concern is that when I connect to my PC, I have the following message:
    + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
    + To get the list of available ports, click here. +

    Then I have a list of ports in bold, but I don't know what to do with.

    How to solve my problem?

    Thank you


    Are you sure that your laptop is Satellite 2009?
    I put t know this model of laptop.

    But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
    But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
    Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
    Then try to reconnect the USB HDD

  • Can I use a connection high speed in safe mode?

    I have something to do in safe mode with internet connection, but I only have a Modem high speed and the computer does not detect the modem how can I use my broadband in Mode safe mode pls help me

    This is not surprising.  For networking Windows in safe mode uses a limited set of common standard network built into Windows device drivers.   It is the basis of the concept of safe mode which can be used to deal with 3rd party driver problems.  Windows does not have a driver for each possible network card / device.  Mobile Broadband are exclusive and very probably not be supported with a native Microsoft device driver.

    What is, is that you need to do in safe mode with networking?  If it is really essential, maybe you could do it on the site of knowledge where you could plug their router.

  • Internet connection for the second computer on a connection high speed

    I have two computers, one running XP and a Vista.

    They were bound by a simple home network wired using a switch. Internet is available via dial-up on the Vista machine.

    I changed the cable (high speed), always on the Vista machine only and leaving the intact cable network.

    Next step was to install a Linksys WRT54G2 V1 router and run the connection Strip through it.

    Then, I took the switch network cables and connected to the router. I am able to access the files on each machine to other machine.

    However, I do not have access to the Internet on the XP machine and do not know what I should do at this point.

    Could someone lead me to some documents that might guide me please?

    Thank you very much...

    You cycle the modem power cable after unplugging the XP machine, connected to the router?

    The best thing to do is power down (cable modem, router and PC), then turn on the cable modem, wait it a few minutes, then turn on the router, wait a few minutes, then turn on the PC.

  • Tecra Z40-A-176 - how to get support for high speed Port Replicator III?


    a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

    What I found was the support for laptops page itself, but not for the port replicator.

    With regard to:

    I want to have the support so.

    What do you mean by support and what is the problem with the display port?

    If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

  • How to remove network connections

    I created too many different network connections.  How can I remove those I want to use?

    You're talking about WiFi networks? If so go to system-> network-> wireless-> Advanced preferences. Click on one of the networks you want to remove and click on the sign less at the bottom of the list.

  • USB 3.0 connecting high-speed USB 2.0 drive

    I have a Western Digital 1 TB USB 3.0 external hard drive. I connect it to the USB 3.0 port (blue) on my laptop Acer Aspire 5755-6647, who works under Windows 7 x 64.

    When you connect, I get the "this device can perform faster: this USB mass storage device can transfer information faster if you connect it to a Super Speed USB 3.0 port" message. When you copy files to the drive, I get about 32 MB/s, which corresponds to a USB 2.0 speed.

    I tried to disable the USB power management in the utility USB 3.0 host controller. I tried to uninstall the device and put it back. I'm using the cable supplied with the disc and is a USB 3.0 cable. I have the latest Renesas USB 3.0 driver installed ( I also tried to use an older driver from Renesas. My BIOS is updated (P5WE0121).

    I don't know what else to do. If it helps, the first time I have connected my laptop hard drive, it's on a USB 2.0 port (I had for some reason any remembered which side of the laptop had the port 3.0 and does not check for blue). As I have said, however, I completely uninstalled the device. I suspect that Windows can be "remember" the device and install with the 2.0 driver.

    Update: I finally try one last thing before you go to Acer support. I thought that perhaps not enough power provided by my USB 3.0 port on the drive, forcing him to 'downgrade' 2.0. So I bought a cable to Yfor $5 to offer auxiliary power of the adjacent 2.0 port. Result: IT WORKS. Immediately connected as a USB 3.0 peripheral speed and transfer is USB 3.0.

    Solved. A little disappointed with the Acer/Intel for the USB 3.0 under normal, however.

  • How can I get a high speed network wireless EA2700!


    I have another problem is that when I used my android devices connected to the router. Max conncet speed is only 65Mbps. But when I use my last router can be 135Mbps. I changed bandwidth auto 40 MHz. thanks!

    Try the single N, WPA2 Mixed mode only, 20 / 40 Mhz and channel 11... ? Ensure that enable WMM is enabled.

    Any other WiFi routers around? InSSIDer v3 app allows to discover... It's free.

  • How to remove DB connection username of tablename prefix? (Error ora-04052)

    Hi all

    I managed to establish a heterogeneous connectivity between ORACLE 10 g 2 and Sybase ASE 15.0.2 using generic HSODBC. I defined a database link called using CSSTAT:

    create database CSSTAT link to connect to 'fw' identified by ' * ' using 'CSSTAT ';

    Using SQLPLUS, now I can query all the tables in the schema "dbo" using qualified table names such as "csstat.dbo.table_name":

    Select *.
    of 'csstat.dbo.table_name '. CSSTAT;

    Now, the problem occurs when I have to run this query from a PL/SQL block. When I try to compile this code, Oracle throws an error "ORA-04052' complain that it cannot find the fw.csstat.dbo.table_name object.

    The problem is pl/sql compiler is prefacing the table name qualified with DB link username "fw". Is there a way to tell Oracle not to do?

    Funny, it is SQLPLUS this query works well, but only to PL/SQL makes it throw an error. How can I go about fixing this?

    If you call from the same foreign user account tables, you can use the HS_FDS_DEFAULT_OWNER parameter to precede the actual owner of the object.

  • How to remove the connection identifier Apple Apps.

    My wife's iPhone had previously purchased with the help of a now deleted Apple ID applications. I deleted all original applications under the id now deleted and downloaded under its new Apple ID. However it cannot be updated because the iphone continues to request the password for the deleted code. I tried a factory reset, but that did not work. What else can we do to get rid of this app connection to an old deleted ID?

    Uninstall applications, reset the phone, and then connect to the new Apple ID, then again in place.

  • How to lock my network high-speed mobile 3g only?

    I am currently using acer w511 and even though I have a 3G network signal, sometimes, the signal turned to the EDGE network automatically and speed more slowly as *, so I was wondering, if there is a setting to indicate my network still locked on the 3G network only on window 8? Thanks for the help


    Changing the settings of automatic NETWORK still locked in a 3G network is not available in Windows 8.

    You can use your favorite search engine and search application which helps you to make the necessary settings on the network mobile broadband.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    I hope this helps.

  • When I start my computer, it seems to stall until the CC box. As I am on a connection high speed limited is CC connect and stay connected to the internet using a portion of my allocation of limited use.

    Internet and CC slow down my computer at startup upward and using resources of my pocket money to broadband

    Stan, you can disable the creative menu topic Cloud file synchronization.

    Go to: gear on the top right corner icon > preference

    You can also uncheck "Start with the connection".

  • How to configure a modem high speed in windows 98

    1. I have my old emachine running windows 98 Second edition, the problem is im trying to get my modem to broadband installation cricket, but he he reconizes just as usb mass storage, my pc running windows xp media with oem edition broke down cannot get to windows will not let me type in the command line. IM lost as to fix one and other to get online, I have the disc that came with both computers and they were pre-installed so I guess as its oem.


    Support for Windows 98, Windows 98 Second edition and Windows Millennium Edition (me) ended on 11 July 2006. However, you may read this article for general troubleshooting of USB.

    What about XP, we would need more information.

    1. what exactly caused your computer down?
    2 did you change your computer, after which the issue started?
    3 have you tried booting in safe mode?

  • How can I remove a connection from network Local to my computer?

    I have a connection to local network on my computer (XP Service Pack 3 operating system).  I had this connection turned off for awhile and I also removed the ICON on the desktop for this connection.  For many months, I noticed in the Log Viewer/system event I had a DCOM error every morning when I started my computer.  Sometimes, the computer may pause for a few seconds, the screen would go black, and the system should restart automatically--normally.  I would check the log Event Viewer/system and the DCOM error was there.  At other times, the system should boot normally until he got to the window where I select user or administrator - at this time there, the mouse would be frozen in its tracks.  A restart (by cutting the power supply to the computer) would all walk normally again.  Another check of the event log and the DCOM error occurred once more here.  I have to admit that the problems I identified here are rare visitors to my computer (no more than once or twice a week), but they are of course annoying.  So, I believe that this connection to the unused LAN is at the root of my problem.  Then I decided to activate the LAN connection, restart my computer and see if the DCOM error occurred when starting - no error has been found.  Has it done for me, I decided that the unused LAN connection must go.  I, however, have not found the magical instructions for how to remove the connection to the local network.  I read an article that told me the Device Manager where it should be delete this connection.  So I made a visit to the Device Manager and found the connection LAN listed there - I'm not sure this is the right thing to do.  I also made a visit to the network connections and clicked on the unwanted local network connection - I found that delete is dimmed.  I just seem to be lost as to how to make this connection to the local network to go.  Can someone give me help in this task?  Any help sent my way would be greatly appreciated.

    It is a sequel to my last post.  I decided, after that no response was forthcoming to this message, follow the instructions that I have included in this post more soon to try to remove the connection to the local network unwanted from my computer.  FYI, this set of instructions worked perfectly and I have over this connection to the LAN on my system.  I hope that this information will be useful to others you want to remove a local network of their Windows XP Pro SP3 system connection.

    I. M. learning

Maybe you are looking for