How to remove a mouse device driver and prevent it to relocate

Similar Questions

• How to install logitec mouse wireless receiver and the software driver CD?

  How to install logitec mouse wireless receiver and the software driver CD?

  http://www.Logitech.com/index.cfm/support_downloads/&CL=us, fr.

  There is a link on the site above to contact Support Logitech technique.

  See you soon. Mick Murphy - Microsoft partner

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• How to remove the old devices in list "managed device"?

  I would like to know how to remove the old devices (disused) from the list of devices managed on version 2.2?

  Go to management > Unmanage devices and select the devices you want to delete. Click the right arrow to move them in the right pane, and then click on the button "unmanage".

  Thank you

  Lynden

• How to remove the mouse? What is the Quiz Manager?

  I think I found an answer. Click on the Blank. Right?  :-)

  1. I still don't know how to remove the '' mouse. '' Help, please.

  2. I inserted a Question slide and specified as a poll. How can I deselect the 'right answer '? Or, why the second slide that is the result should be added even if it is investigated. Or, how can I get the result of the survey? (this can be advanced skills?)

  3. I deleted the second slide added automatically and a message that says: "if wanting to come back, go to the Quiz Manager. What is the Quiz Manager? Where is he?

  I really appreciate your help.

  ...................................

  > I'm a beginner.

  > I dragged a jpg image she draws on a blade. I got to know that he is sitting on a background. I have found a way to replace it with different images, but cannot find a way to remove it. Could you help me?

  > another Q is, how can I remove mouse? I can move it around, but cannot be removed. THX.

  Post edited by: winnn123

  Post edited by: winnn123

  Sorry I have not responded to your last questions, but we live in different time zones, and I was asleep.

  I am pleased to have been useful. Feel free to ask questions. Captivate deserves to take some time to learn it. I have tried many other software to develop active learning and finally CP has become my absolute favorite. So I want to help the starters as much as possible...

• Hi, I have cs6. I bought a picture on adobe stock to use in a design. I don't know how to remove it from my library and use effectively? Help please

  Hi, I have cs6. I bought a picture on adobe stock to use in a design. I don't know how to remove it from my library and use effectively? Help please

  Go to stock.adobe.com and log in with the user ID Adobe that you purchased the image.

  Click on the Images link at the top right of the page to go to your history of license

  Click on the thumbnail of the image of the image you want to use to access the page of image details

  In the center of the details page, you will see a big blue to choose link where you want to save the image to

• WSD Print device driver error prevents the standby machine

  Hi all.  I've been struggling with this problem for a few months, without success.  On my system: Dell PC, Vista 32, SP2, using a Brother MFC 490 all-in-one that is connected to my wireless network.

  My problem is the following: a few months ago I noticed that the Bureau has refused to go to sleep, instead showing a popup that says, "the device driver for the WSD print device prevents the standby machine."  It's embarrassing at the very least, a waste of money and the system of life at worst.

  I tried the following without success: restored the system to a point before the show, updated the wsd, uninstalled/reinstalled the wsd driver driver & peripheral, uninstalled the Brother software (the printer has remained on the system, thanks to the auto detection) and banged my head with great enthusiasm on the keyboard.

  If all goes well, there is a relatively easy fix!  Thanks for your suggestions...

  Hello DFontanella,

  The error message indicates that there is a problem with the driver and preventing the computer to go to sleep.

  I suggest you uninstall the drivers for the device. Disconnect the connected device and try to load the generic drivers of the printer in the back.

  Also try to restore the driver from Device Manager:

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  1. open Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  2 right-click the device for which the previous version of the driver is desired and then click Properties.

  3. click on the tab drivers.

  4. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove Microsoft Mouse and keyboard Center?

  Hello, I look at a log of the events, and I noticed that there was some sort of error with the keyboard. Recommended action was to remove the driver and reinstall. So that's what I did. I have a Microsoft Comfort Curve keyboard 2000. Once I deleted the driver, then I tried to reinstall the driver which is bundled in a package called Microsoft Mouse and keyboard Center. After downloading and extracting, invites a mistake: "this version of the software is already installed on this system. To re - install this software, you must remove it all first, and then rerun Setup from the installation media. For more information about removing a program, see Windows Help. "So, naturally, the first thing I did was look for an uninstall. Hmm, nothing to add or remove programs, there is nothing in the folder of the Start Menu. So the only other thing I could think to do was to delete the files in the C:\ directory, I did. But still, after trying to reinstall this driver, I get this same error. Will you please tell me how to remove this software from my computer, so I can reinstall it, so that I can use the good driver for my keyboard instead of ' HID Keyboard Device. Thank you.

  Hi, I thought about it. Or, at least, I understood how to uninstall. It turns out that Microsoft Mouse and keyboard Center is in Add or remove programs, you just need to search to find it. And I uninstalled. So, I'll just reinstall and go from there.

• How to remove thumbdrive driver and prevent them from be installed?

  Hi all, currently I put a lab for students. One of the requirements for this configuration gave me is to disable the use of USB key or external hard drive.

  Whenever a key - USB plug first into the USB, a driver will be install (like USB, Samsung, Toshiba, Cruzer storage), how can I prevent that?

  I have already a few driver already installed thumb drive, how can I remove them?

  Thank you.

  Hello-another guy.

  Thank you for your message.  You can make a change in the registry to remove the possibility of using removable media.
  Click "Start" > click "Run" > type regedit in the text field and press "Enter."

  Navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor

  In the right pane, double-click the name of the starting value.

  Change the value 4 to disable the removable USB mass storage device drive access.

  To restore and re - enable access by car to the removable USB mass storage device driver, restore the value data for the boot to its original default value of 3.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get a device driver that works for my printer. ? I tried everything I know.it is installed and it must be troubleshoot.help, says

  I can't work. It does not recognize the device driver that I'm trying to fix it with

  Hi dawn,

  I appreciate the efforts to solve the problem. We would like to know more detail with you to help you to come.

  (1) what is the brand and model of your printer?

  (2) what is the exact full error message you get in regards to number troubleshooting driver?

  Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Your answers are important to us. Write us with the details asked so that we can help you to come.

• Two hard disk drives, how to remove the new E drive in XP?

  My XP system crashed and I reinstalled the Windows XP operating system and I have now 2 hard drives, the original C with 76 GB of space and the new E with only 2.5 GB of space and I get a message that says that my disk space is insufficient, and I can download is nothing more nor can I use the system restore because it says that there is not enough disk space.  How can I get rid of this new drive E and keep my old C drive?

  You told us that if you try to install with a CD or a restore partition by pressing an F key?

  The product key sticker is on the side of the hard drive?  It's a bit a strange place for the Windows product key sticker, this sticker is usually outside the computer.  You really need to make sure that you have the product key, otherwise you will not be able to install Windows!  The product key is made up of five series alphanumeric each containing 5 digits or characters in this format: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX.

  I can only emphasise this point, you better, make sure you have the right key, otherwise you will be up the proverbial Creek without a paddle!  If you can still start the old installation of Windows, I suggest strongly that do you use ProductKey of Nirsoft to retrieve and check the key used for installation, ProductKey is available here: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  How many hard drives you have installed in the computer?  If you have only one disc, and if you use a CD for installation, then when you get to the selection screen of disc and partition delete all partitions on the disk and then create a new partition using all available space on the drive and format it NTFS.  Once you do that and before you start Windows Setup, restart the computer with the CD and then install Windows on the new partition, this restart after you delete and recreate partitions avoids assignments of unexpected drive letter by the installation program.  It goes without saying that all data on the disk will be lost when you delete the existing partitions, and then create a new.

  When you install Windows make sure that only the keyboard, mouse and monitor is connected to the computer, disconnect all other devices such as external hard drives, printers, flash drives, etc.

  John

• How to remove clips on external drive with fcpx

  Hi all

  Using the latest version of fcpx.  I went to store stuff today in order to free up space on the external drive that contains all my data of fcpx.

  To do this, I deleted unused takes.  So I select a bunch of clips > right click > move to trash > empty trash > fact.  Or so I thought.

  After doing this for a while, I was wondering how much space I had erased on the external hard drive so I click on 'get info' and find it strange that I didn't win any space at all.  Then in fcpx I I tried to right click on a clip of a decision-making > reveal in finder and I can see all the other clips I had "deleted" always there on the external hard drive!

  Can someone explain to me how to remove clips on an external drive in fcpx?  Also is there a simple way to fix the confusion I have now?  Basically, fcpx displays the content exactly as I want it to be on the external hard drive, it just does not actually all that...  Please don't tell me I have to manually locate and delete each clip - there are hundreds!

  Much help appreciated

  When you say that your clips are on an external drive do you mean that they are in a folder outside the library? If this is the case, yes they must be deleted manually.