Taskbar, menu icon and start start will not appear

Similar Questions

• Why are most of my grayed out icons and my programs do not appear in all programs on the start menu?

  My computer crashed the other day. I returned with a system restore. I have scanned for viruses. Now most of my icons (computer desktop and folders) is grayed out. When I click on "all programs" in the start menu, none is listed even though they are still on my computer and still work.

  Hi homeWJ,

  Method 1

  See the Microsoft article below to download and install the fix, check if it helps.

  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty

  http://support.Microsoft.com/kb/941248

  Method 2

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Ripping CD's with Media Player, song, artist, and al. titles, will not appear.

  When the cd is being ripped off.  It used to and doesn't work anymore.  I use Kaspersky Antivirus and when I installed the latest version, the CD information appeared is no longer.

  Help

  Hello

  • Does this happen with specfic CD?
  • What were the changes bfore the problem occur?
  • What version of Windows Media Player do you use?

  You can view these methods:

  Method 1:

  Try to run this fix it and check.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:

  If your computer is not working properly, you can use these points to return Windows XP to a previous state when your computer was working properly restore. It can also change scripts, batch files, and other types of executable files on your computer.

  http://support.Microsoft.com/kb/306084

• I just bought a Microsoft Surface Pro with Windows 8, and the cursor will not appear at certain points in time

  I recently bought the Microsoft Surface with Windows 8 Pro is installed, and sporadically the cursor disappears.  It doesn't matter if I use internet, Outlook or any other program.  Any ideas how to fix this?

  Clues in the present?

  The mouse cursor over where the Surface Pro and drift
  http://www.surfacetablethelp.com/2013/02/surface-Pro-mouse-cursor-unresponsive-and-drift.html

• Windows Installer will not work. I have Norton Antivirus, CCleaner, Securia, etc.. Some programs start more. I have Office 2002 and my processor will not open.

  After problems with my system slows down, I found Windows Installer, stop operation. I have Windows XP Home Edition, SP3. I have Office 2002 and my processor will not open. I tried to install install 4.5, but it wouldn't work.  I can't start in my Services, either, even if it is configured to start automatically. I don't know if I just need to migrate to Windows 7 and do with it or continue to try to solve this problem!

  My hard drive is failing and replaced with the new computer.

• Icons and start menu are missing, unable to recover

  How do you get your icons and start menu they all went r how to make their return on my pc

  * original title - how do you get your icons back even the start menu is gon *.

  Try CTRL ALT DEL - file - new task type (run): Explorer

  Scan your Virus and malware.

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• With rendering problems. Rendering started taking 10 times longer. I have pleanty of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  With rendering problems. Rendering started taking 10 times longer. I have a lot of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  I determined the cause. Damaged media. Copy old sequence in new chronology cross me if I return after any change in the timeline. I am able to export own media. No change to hardware and software recently. I'm running Windows 10. (Hatred, dating back to 7)

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• I was in Lightroom and had a power surge and now Lightroom will not... What can I do about it?

  I was in Lightroom and had a power surge and now Lightroom will not launch. He has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to fix the next time it starts. I closed my system and Lightroom will not always start. Does anyone have any suggestions?

  You bet and Yes:

  * do not delete entire .lrdata folder

  * don't delete anything else

  Best?

  If so, you can rebuild strength previews (e.g. standard previews of entire catalog) using library-> menu previews.

  Rob

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media