How to resize an object on a layer, while a certain characteristic of the image measures a certain width?
Hello
I have a number of images of preparation of animals and they all must be 40mm at 300 DPI from tip of nose to their buttocks. The problem is a bunch of them have antennas, of long ears, long tail, etc. which may not be included in the measure, which prevents me to perform the entire image a certain size. How the entire image would turn so I can be sure that most of the animal measured exactly 40mm? TYIA!
Crop the image for measurement points (do not delete the cropped pixels). Then the Image-> resize to 40 mm wide with 300 dpi. Then select reveals all and crop once again if you want.
Tags: Photoshop
Similar Questions
-
How can I take several consecutive steps of a frequency meter and keep the previous measure?
I'm sorry, I'm very new to view lab and I am taking several consecutive steps of a frequency counter. I place the sub measures VI and the indicator with a loop and then set N to the number of iterations. The problem is that I don't get a box in my display board when I need all the previous measures taken for this iteration. Thanks for your time.
Your data inside the loop to an object outside the loop of the wire. Right-click on the tunnel and turn on indexing. You will have a 2D array (if your data was in 1 d) where each row (row or column, you will need to understand) is the result of the iteration.
You can separate the 2D table by using the Index of table vi.
-
the screen of my work disappeared suddenly blue while he was working on an image. How can I go back to the standard work (default?) screen
litztombo wrote:
the screen of my work disappeared suddenly blue while he was working on an image. How can I go back to the standard work (default?) screen
"Blue screen" looks like this:
blue screen of death
-
How can I add hair lights to make of this new part of the image hair
Basically, I do this, as a favor for my girlfriends Santa secret where I shopped picture the face of the person in this picture of Mary Berry and Paul Hollywood. The problem I have is the hair that I had put on it seem natural because I don't know how to add light effects to make it look as if its on the same angle as the rest of the photo.
I just started using Photoshop for the first time a few months ago so I'm a complete novice, so any help with this would be greatly appreciated, I'm sure that the light of the sun comes from the top of the left side.
Hey anubis,
Please see the tutorial below that is associated with the same.
http://www.photoshopessentials.com/photo-editing/hair-color/
10Steps.SG - Photoshop tutorials and resources
Change hair color in Photoshop
Hope that helps.
Kind regards
~ Mohit
-
How to resize an object and show on stage
Im trying to resize a simple object according to what dimensions I set, but it does not work.
so now the stageHeight and width is 600 x 600 and it still does not work.
And how do I resize the object immediately when the SFW load (so early, it will be 3 times bigger)
I have a MainClass with this code
public var rescaleRatio:Number = 1; public var _element1:CreateRow_Col public function MainClass_Test() { addEventListener(Event.ADDED, init); _element1 = new CreateRow_Col(rescaleRatio) addChild(_element1) } public function init(e:Event):void{ stage.scaleMode = StageScaleMode.NO_SCALE; stage.align = StageAlign.TOP_LEFT; stage.addEventListener(Event.RESIZE, setUpScreen); } public function setUpScreen(ev:Event):void{ stage.removeEventListener(Event.RESIZE, setUpScreen); if(stage.stageHeight > 500){ rescaleRatio = 3; }else rescaleRatio = 5; }
and the CreateRow_Col class has this
public class CreateRow_Col extends Sprite { public var theAppliedScale:Number; public var myObject:BG = new BG() public function CreateRow_Col(reScalling:Number) { theAppliedScale = reScalling; addEventListener(Event.ADDED_TO_STAGE, zzz); } private function zzz(e:Event):void { removeEventListener(Event.ADDED_TO_STAGE, zzz); myObject.scaleX = myObject.scaleY = theAppliedScale addChild(myObject) }
Copy the following code and paste it into your document class:
package {}
import flash.display.MovieClip;
import flash.events.Event;
SerializableAttribute public class MainClass_Test extends MovieClip {}
public var rescaleRatio:Number = 1;
public var _element1:CreateRow_Colpublic function MainClass_Test() {
addEventListener(Event.ADDED, init);
}public function init(e:Event):void{
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, setUpScreen);
setUpScreen(null);
}public function setUpScreen(ev:Event):void{
if(stage.stageHeight > 500){
rescaleRatio = 3;
}else
rescaleRatio = 5;}
if(!_element1){ _element1 = new CreateRow_Col(rescaleRatio); addChild(_element1)} else {_element1.zzz(null); //<-make zzz() public in your other class.}
}
}
}
-
How to resize an object and also to mitigate the effects (transparencySettings)?
I want to to scale an object through script but also effects nationwide, currently my resizing does not only. My effects are TransparencySetting: drop shadow, inner glow, outer glow.
For example using the following does not work:
pdf.resize(CoordinateSpaces.innerCoordinates, AnchorPoint.topLeftAnchor, ResizeMethods.multiplyingCurrentDimensionsBy, [pointSizeScale, pointSizeScale]);
I have to resize the effects that I have at hand for example:
thisObj.transparencySettings.dropShadowSettings.xOffset = dSXYOffset*pointSizeScale; thisObj.transparencySettings.dropShadowSettings.yOffset = dSXYOffset*pointSizeScale; thisObj.transparencySettings.dropShadowSettings.size = dsSize*pointSizeScale;
Thanks in advance!
I think that by using a transformation matrix will solve your problem (pdf.transform (.))
-
How to resize an object? CS4
When I use the scale tool, it is not scale proportionally (relatively). The object becomes larger or longer, etc.
When I hold down the SHIFT key to make, it does not at all help. What is the secret of a scaling object proportionally?
Thank you?
In fact, you said "scaling tool", I did not notice that I'm sorry, the method I would use (and described) is using the standard black selection arrow and the object's corner points.
-
Duh... I forgot how to resize an object on the Persic. Grid
I've done this before, but can anyone help? I placed a symbol on a perspective grid. The online guide says to used the perspective tool, but I forgot how evolve instead of moving the item. Thank you.
Command Shift B
View > hide/show the bounding box
We shift the command B
-
How to resize a photo as a layer
I know several change in the size of a photo in the new 2.1 can someone help me please.
I thought that it was a 2014.2.1 update
-
How to make an object in an area go a certain direction
As the title suggests, I am very curious about what if there is a way to define or to mark a certain area, and all the objects inside this area go the specified direction. For example, say that there is a treadmill in the project. I would like to mark a square top and no matter what item that enters the limits would start going straight to a certain speed.
The answer is no, it not there no. built in AE feature that does what you ask.
The long answer is, someone very competent with Expressions and/or script might be able to write the code to do what you want to do.
In addition, it has some third-party tools available that help in the physical creation of the real world within the AE. The most important is not cheap and called Newton:
-
https://www.dropbox.com/s/prdidvbwox208xr/screen%20Shot%202014-04-29%20at%207.02.27%20PM.PNG
There nothing about this, but it won't go away.
It seems that somehow you moved the address bar on the tab bar, leaving you with an empty navigation bar. If you have installed the add-in Classic theme restaurateur.
- Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
- Beside the classical restaurant theme, click on the Options button.
- On the main tab, check "hide navigation bar.
If you used another method instead, put the style in the userChrome.css file and restart Firefox. You can use the stylish add-on instead, if you have installed.
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul); /* The above line should appear only once in the file */ #nav-bar { display: none !important; }
-
How to set the text to the center of the image and keep it responsive
Hi, I'm new in Muse so Hello everyone
I created a large image and add the text object that I placed in the Center. I have setup the image and width sensitive.
Keep what reduction in size of the sensitive image browser, but the text is now high position relative to the browser.
My question is how do you tell the text object to hold the center of the image? (As rather pin to pin object browser)
Thank you
I found this one:
Text the PIN in the center of the image when using fluid width
He answered my question but not yet a reasonable solution. Muse should allow us to group objects even with width and high sensitive. Another way is to allow pin object to.
-
How can I remove the user name and the image of Windows XP new Start Menu
Two questions:
1. How can I delete the user name and the image of Windows XP new start; and
2. my computer keeps asking me to press the F1 key to start Windows. How to skip this part?
Thank you.
Hello
The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.
For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:
Registry warning
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Step 1:
a. start Windows Explorer and go to this folder:
C:\Documents and Settings\All Users\Application Data\Microsoft account imagesb. in this folder, rename the BMP file that corresponds to your user account.
(For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)c. then rename the following folder:
C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
to something else, for example,.
C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.Step 2:
To remove the user name, follow these stepsa. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorerb. in the right pane, the value NoUserNameInStartMenu-value data 1.
c. close Regedit.exe and restart Windows.
You'll find yourself with a blue area at the top of the Start Menu.
Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?
You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. -
How to save the image to an email in the mail application
Original title: save the image in the email
How to save a photo to an email? When I hold down the image, the only option is to 'copy '; There is no 'Save' function available.
Hey Lucent,
Thanks for posting your query in the Forums RT in Microsoft Windows. If I understand you correctly, you have a problem with saving an image with the mail application. I understand that it must be frustrating, but don't worry, we are here to help solve your problem and guide you in the right direction.
In the Mail application, you wouldn't be able to do differently than the option to right click functions. The dialog box you get with the "save image under" comes to a browser. If you use Internet Explorer to check email, you'll get the option to click with the right button on a photo. In the Mail app if you want to download an image that was attached to the email, you can click on the picture to download and click it a second time to get the options to open or save.
You can also check the suggestions provided by Jianan! responded on October 31, 2012 in the following link:
Please answer us on the State of the question to help you further.
-
How can I find number of objects in a layer?
I have a document with hundreds of layers. I want to delete the specific purpose of layers. I iterate through all the layers, but I couldn't iterate over objects within a single layer to find that specific object.
I there a way I can go through all objects in the layer?
or
How can I find number of objects in a layer?
I'm going through the API documents but could not find.
Here is the code I wrote,
var artLayer = undefined; if(app.documents.length == 0) { app.documents.add(); } var myDocument = app.activeDocument; var layerCount = myDocument.layers.length; for (var index = layerCount - 1; index >= 0; index-- ) { var targetLayer = myDocument.layers[index]; var layerName = new String( targetLayer.name ); if(layerName == "Colorways") { artLayer = myDocument.layers[index]; //Can I iterate through objects in a layer?? // for(var newIndex = 0; newIndex < artLayer.items.length;newIndex++) // { // Need something like this // } break; } }
instead of points, you should use "pageItems.
for (newIndex var = 0; newIndex)< artlayer.items.length;newindex++)="" there="" is="" no="" "items"="">
for (newIndex var = 0; newIndex)<>
or as in your second post, instead of the activeDocument, target your layer
index
index
Maybe you are looking for
-
Color on the back of the phone goes on case
So I bought the iPhone SE it is almost usable but it's just that I have this transparent case for it and I used it for 1/2 months and the color of the phone is now on my transparent case. I don't know if it's normal and I'm quite concerned that after
-
Configure where 'Star bookmark' by default saves bookmarks.
Is this possible? If this is not the case, how can I suggest the Mozila Firefox developers. It's the only reason why I don't use this wonderful browser.
-
Upgrade to a 750ti ona K450e GTX?
So I have the 4460 i5, 8 GB of ram and the GT 730 of the k450e version. I think the upgrade of a GTX 750ti for decent game. My computer will it support? I'm afraid that my diet is unable to support because I think it's really low.
-
How to sync the button in the mainVI with a Subvi round?
(1) son? (2) global variable? ================ I want to stop some programs in Subvi execution by pressing the button in the mainVI. How to connect the button in the mainVI with a Subvi round? (1) son? It does work if I connect the button with the cy
-
Play games.