How to restrict access to users?

Similar Questions

• How to restrict access to a single user for a proxy in OSB service

  How to restrict access to a single user for a proxy in OSB service

  A. go to the Proxy Service and click on the Security tab

  B. click on Transport Acess political of control to be edited.

  C. click Add to the terms to restrict users.

  D. in the main list, select the category from the user

  E. give the user name to which you want to give access.

• How to restrict access to certain pages of a user group

  I want to restrict access to certain pages in my application to a set of users only. How can I achieve this.

  use the authorization scheme for permission to the users group"

  See also follows her

  Schema authorization using the APEX authentication scheme

  security - authorization roles and user in Oracle Apex? -Stack overflow

  How to create the schema for permission for the users group.

  Leave.

• How to restrict access to the service web application deployed on weblogic for user group only

  I built the web service application in jdevelopler 11.1.1.7. Their security policy applied in the web service of the default Oracle policy which is (policy: Wssp1.2 - 2007-Https-UsernameToken - Plain.xml)

  Now all want to access the web service application must provide the name of user and password in the header section of the SOAP request to meet the requirement of the policy.

  the following steps I'm trying to restrict access to the application of web service with a specific group of users among users of weblogic:

  Connect to the weblogic administration console

  Create user or group of users

  Click on the links of deployments

  Select your web service

  Click the Security tab

  Click the sub-tab political

  Choose your authorization provider in the menu drop-down (looks like by default)

  Choose Add Conditions-> Group-> Type in the name of the Group

  Finishing

  But access is always available for all weblogic users (IE users not in the group specified in the above security configuration). How can I restrict access to only authorized group? Any thing lacking in my approach?

  There is nothing wrong with the steps mentioned in the question. In addition, you must do the following

  At the time of the application deployment with regard to the security part, there is a list in the title of the question (which security template you want to use with this application?)

  You must select (Advanced: use a custom template that you have configured on the page of configuration of the Kingdom) a configuration mentioned in the question will be work

• How to restrict access to the drive of Wndows xp sp3?

  I have 3 user account on my computer, it is has the administrator rights and the other is a standard user account.

  I want to restrict access to all readers for the standard player.
  I used gpedit.msc to enable the administrative model, but it also limits the account admin and me to access the road
  OS: windows XP SP3
  Please advice
  Hi Utkarsh.Ranjan,
   
  If you want to restrict access to a drive by using the Group Policy Editor, you can not apply for a particular user account. This will change for the user accounts.
   
  You can't restrict access to the complete transmission. However, you can resrtict access to folders and files inside a car to a particular user.
   
  Refer to the section "set, view, change, or remove special permissions for files and folders" in the following article and follow the steps to remove the authorization of the user access to the file/folder.
  How to set, view, change, or remove special permissions for files and folders in Windows XP

• How to restrict access to a program?

  Original title: restrict write access to a program

  is it possible to prevent iTunes to change my hard drive? I just got a new iPhone 5 as a gift, and when I tried to put my music on the phone, I had problems, which culminated with iTunes in deciding to delete my collection of mp3 from my computer. She also somehow FUBARed a DVD - RW I had saved my collection on when I made the mistake of trying to copy them to the phone from the backup DVD (must have burned a DVD-R).

  Is it possible to limit the access of iTune hard disk read-only until I learn how to prevent FUBARing my music collection? Really, I hate having to get out of my backups. I am seriously thinking the iPhone back and get something less restictive does insist on managing my music for some reason any.

  I use Windows 7 Professional and even though I know how to restrict a user access to some files with NTFS permissions, not sure how limiting access for a PROGRAM.

  Hello

  All programs will not automatically modify or access the files, unless the program is asked to go to the location, you may have set some options in the iTunes software. Given that the Apple support would be better suited to help you with this problem. Refer to this link and ask the question

  https://discussions.Apple.com/index.jspa

  It will be useful.

• How to restrict access to the system.

  Hello
  
  I thought it is possible to restrict access to the system during the processing of payroll is. The GI company is currently working to, so is distributed departments in a different location across the country during the payroll run payroll users are still transaction, insert/update of the data in the entry of the item, monthly data on the pay to play.
  
  It is technically possible to restrict access to the system or component during the race entry window? no idea to proceed accordingly?
  
  Thank you
  
  Published by: user10893201 on March 3, 2010 07:27

  Hi user;

  Please check:

  Security profile is not limiting access to payroll employees [ID 344649.1]
  How install bank account maintenance and security of access to the account in Release 12 [403975.1 ID]
  Restrict access to security of payroll is not working correctly on the safety profile of set [244652.1 ID]

  Also, check search below:
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=restrict+access+&objid=f475&DateRange=all&userid=&NumResults=15

  It may be useful

  Respect of
  HELIOS

• How to restrict access in EDITION of APEX Applications in the same workspace

  Hello
  
  I have a workspace that consist of several say application APPL1, APPL2, APPL3,... etc...
  This workspace has access to several... say developers Developer1, Developer 2, etc...
  
  How can we restrict access in EDITION of Applications for a particular user.
  
  for exp.
  
  Developer1 should be able to access/change only the APPL1 & the APPL2. He should not be able to modify APPL3.
  same way... * Developer 2 * should be able to access/change only APPL3. He should not have editing access to APPL1 & APPL2.
  
  
  Thank you
  Deepak

  Hello

  I think that's not possible. At least I don't have to see how it could be done.

  This is why there are work spaces. You must create a workspace clean to all applications for example.
  Then of course there was maybe still problem with the analysis of access privileges to the schema if for example all 3 applications use the same scheme of analysis.
  You must assign same pattern to all areas of work, and then all of the developers of the workspace that you can change database schema objects.

  BR, Jari

• Guest account, how to restrict access by time-of-day

  Hello

  I am a beginner with Wifi/WCS and have a question about how to limit access to guest accounts.

  When you create a new guest account, you set the start and end time + end date.

  Is it possible that I can force the account be active _only_ between 8-5 h (hours)?

  Right now, I can only set start time, end time + end date... This means that the guest account can be used 24/7 until the end date.

  WCS documentation does not mention something like that. And google gives no help.

  Thank you

  Others have asked in the past for years and there is still no way to control which WLC or WCS.  You can control which of your L3, but you'd have to confgiure for the whole subnet.

  .

  http://www.Cisco.com/en/us/products/sw/secursw/ps1018/products_tech_note09186a00800a5b9a.shtml

• How to restrict access with usernames and passwords?

  I'm an intern in a manufacturing company who hired me to do a series of tutorials using Captivate.  The goal is to have a handful of employees (scattered throughout the world) to be able to go to the company Web site and take the tutorials & quizzes that I do.  I played with the advanced options vary a bit to get a feel for them, but I'm not finding what I need.  The employee that the company chooses to take these courses online should be able to sign in with a username and a password for a page that contains the courses listed there.

  Should I get our server/Web site managers to code all this, or is it easier (and it would make more sense) to make a presentation of Captivate referring to a list of the specific company e-mail address and allows them only these email address to have a user name and password created for her.  From this point, once the user connects, they see hyperlinks to the online course, they need to take.

  Any input on this would be very useful and thanks in advance!

  Close enough...

  And LMS is not the ONLY way to follow the scores and information, it is just the most common these days.

  Captivate allows alternatives, as for an acrobat.com account as you point out, or you can create a custom report page:

  http://help.Adobe.com/en_US/Captivate/CP/using/WS5b3ccc516d4fbf351e63e3d119e958285f-8000.h tml #WS365a66ad37c9f510-67fa130d1265cad66a2-7fff

  However, these methods do not provide for any security from the start.

  If your TI people are ready to set up a folder protected by password on your Web server and you configure your lessons to Captivate him make the acrobat.com account or a custom report page, perhaps you could accomplish what you need fairly easily (low cost). However, this approach can specifically permits not to track people. If you have a site with one generic login (i.e. the user: password), you can just about anyone with this user/pass. If you want each user to have their own username and password, which becomes much more complex. Can your IT configuration guy such a login page that syncs with a centralized database users (e.g. Active Directory)?

  So how do follow you that user through Captivate so the results of the lesson are recorded for the related user on your personalized page?

  It starts to get complicated, so an LMS may be easier:

  Moodle is a very popular, free LMS.

  http://Moodle.org

  Installation can be something internally (find a server, find people to install), but there are people out there who offer to host it for you.

  Here are some more:

  http://www.openelms.org/

  http://sakaiproject.org/

  There are also a variety of LMS commercial products out there, costs vary widely.

  This is what we use: http://www.inquisiqR3.com (link prices are on this page)

  Otherwise, here is a list of good references where you can choose a variety of filtering criteria.

  http://www.Capterra.com/learning-management-system-software

  Hope that helps!
  Erik

• How to restrict access for all? Single user mode...

  I do export/import Windows for Oracle schema objects. How to ensure that when I export in the database of migration no one else doesn't change the data. Is there a single user mode so that I can be sure the only connection when exporting?
  Oracle 10g R2 on Windows Server.
  Thank you
  Smith

  Perhaps you are not familiar with the concept of multi version consistent reading.

  No one can see that that is not validated and reading can never be blocked.

  If you want a system where no one can see things kill their sessions and make a START RESTRICTING.

• How to restrict access to the particular presentation table in a given area?

  My current configuration in the presentation layer is:

  Business generic sale-> field

  -Sales-> presentation Table measures

  -TotalSalesofGoods ->field

  -The costs of the measures -> presentation Table

  -CostOfGoods ->field

  -Customer Dimensions -> presentation Table

  -Items-> field

  I have two built roles, 'ShouldSeeGenericSalesSubjectArea' and 'ShouldSeeCostFields '.

  • Permissions
    • "Domain generic sales."
      • User authenticated-> no access
      • ShouldSeeGenericSalesSubjectArea-> read
      • ShouldSeeCostFields-> default
    • "Measures of sales."
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default
    • "Measures of costs".
      • User authenticated-> no access
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> read
    • "Dimensions of the client".
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default
    • All fields have permissions to:
      • User authenticated-read >
      • ShouldSeeGenericSalesSubjectArea-> default
      • ShouldSeeCostFields-> default

  Given two users:

  • UserA
    • The user has following roles:
      • ShouldSeeGenericSalesSubjectArea
      • ShouldSeeCostFields
    • The user can see everything except the table of fees
  • UserB
    • The user has following roles:
      • ShouldSeeGenericSalesSubjectArea
    • The user can see everything except the table of fees
  • My ultimate goal is:
    • "ShouldSeeGenericSalesSubjectArea" allows access to see the "generic sales subject area", but does not measure cost
    • "ShouldSeeCostFields' allows you to see the presentation layer of"measures of cost. "
    • Example:
      • UserA from above should see everything (including the "cost measures").
      • UserB above should see everything, except 'measures of cost. "

  I tried several different combinations of levels of authorization without result. From my understanding, Oracle security works by taking the path of any restriction. I do something wrong with my permissions on the presentation layer of "measures of cost? Please let me know if there is anything I can clarify or if you need more information.

  I was able to make it work by giving access to role of cost at the level of the subject area. Then each material is no access on the cost, but access if had the other role.

• How to restrict access to the workstations on the Security Server

  Hello

  I wonder if it is possible to limit access to desktop view to some groups, if the connection is from a security server. To explain it a bit further

  * We have users who access it offices internally to a thin/Zeroclient. They comes to connect to their office pool.

  * Other users have a thick client with client view installed.

  * Others have a laptop and cann access their workstations to "everywhere" with client access or view html

  Only users in the latter group should be able to connect on a security server. Right now anyone who knows the URL of the Security Server can access as long as it has right to your desktop.

  I'm sure that this is possible, but I don't know how...

  Another option is to use the external radius authentication. In this way, that you don't have to have separate categories.

• How can I access my user account if I receive the message, the service user profile Service has no connection. User brightness cannot be loaded.

  We have access to our user account for children, but ours is the administrative account.  We tried to access through their account, but it's not accept any administrative password possible to alow access.

  Here is the tutorial that everyone will offer you when you have this problem to logon:

  http://support.Microsoft.com/kb/947215

  I have a little more to add...

  The user profile Service has not the user of the connection failed to load profile

  See if the suite you can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do system restore by using the link given above.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• How to restrict access to the network for customers in the lobby.

  Hello

  How is - this preferable to limit the access of the data ports in the lobby of the company for Internet access only? Although the hosts are not on the field, is it safe to allow them to reach the port of data?

  I suggest setting up a vlan separate for these ports and usig dot1q on trunk this vlan to a DMZ interface dedicated or the subinterface on your firewall with an ACL that only allows access to the internet. That should do the trick.