How to run an application when the cell phone is power on
I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks
It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).
Tags: BlackBerry Developers
Similar Questions
-
How to run vi continuous when the VISA read timeout happens
Hello
I'm using LabView 2010 through a series of Agilent 6000 Oscilloscope. The Oscilloscope reads data from another experimental machine which will occasionally fail due to failure of the sample. When the machine breaks down, it ceases to send signals to the oscilloscope and leads to the error timeout of read VISA and the vi It is over. Is it possible that I can run the vi permanently when the error occurs? For example, when the error occurs, it stores the error in the thread of the error. When the vi read the error code of the wire, it sends a command to stop my experimental machine then stop the vi.
So far, it stops simply during the execution of the visa, playback function. In that case, why do we mistake in and out? Vi stop just when the error occurs.
Thank you
Laurent
-
How to run my application in the background?
Hi all
I designed a UI screen to play a song.
And on click of a button, I want the opportunity to go to my application in the background. Such as screen not updated, but the song continues to play.
Thank you
Mudassir
tried the method requestBackground to put your application in the background?
-
How to run repair downloads when the local disk (c) is bad, system32, rundll
I am home with one leg broken, broken arm, a broken jaw and having my left shoulder replaced, my question, can I me pls someone, anyone, to come and go in my store and get my sled 5lb.hand, I have six kids and they will get no money, in any case, my snowmobile accident, me in front of this infernal thing two months ago. So you can surmise I don't know anything about computers, but I managed to eek exist on this subject, now all I get is not a valid windows, system32, rundll rasapi32 image, I tried to download stuff to repair, but everything on the local drive (c :)) how that will help its just put more wood on the fire I can say) , and I can't get one, that is running. signed, broke and in maine.thanks. PS.it all started after I lost the sound on my speakers.
Hello
· Are you able to boot to the desktop normally?
If you are not able to boot to the desktop then, I suggest to do a restore of the system from the recovery console and check if you're able to start on the system or not.
How do I recover from a corrupted registry that prevents Windows XP startup
-
How to add more application under the new tab shortcuts when we right click on the desktop.
How to add more application under the new tab shortcuts when we right click on the desktop.
Hello
I suggest you to post your questions in the forums 'Development of the User Interface for Windows Desktop' for better assistance.
Here is the link: http://social.msdn.microsoft.com/Forums/en-US/windowsuidevelopment/threads
-
problems with wireless Vista "local only".
How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?Hello
Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer. Since he does not have details of the database of network devices, communicate with him.
- You are able to access the Internet?
Try the steps mentioned below and check:
Method 1:
Step 1: Enable or disable a network adapter and then check:
http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter
Step 2: Run Network Diagnostic tool and check:
Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Method 2: Wi - Fi and in Windows network connection issues:
Reference links:
Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041
Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx
Hope it works.
-
I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.
I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE
Sorry, the MSE tool is to set the MSE when its broken.
UAC controller Tool v1.0 can be used to control the
The UAC settings.However, I suggest you restart the PC and after BIOS hold the F8 key
and when the Windows Startup Menu appears, select Mode safe mode with networking.Now, you will enter Safe Mode. On the page to connect, you will see the
Standard Windows administrator click it to open a windows session, press and hold
in mind, the password can be blank.Once you have done that make a new account administrator and giv it a name.
Restart the PC. That you did this newspaper using the new account.
Once you have done that decide what to keep with your current administrator
account once you've done it restart the PC, BIOS hold down the F8 key and
Select Mode safe mode with network and enter dependencies the Standard Windows administrator.Go to control panel-> user accounts control and security for the family-> user accounts, then
Select manage another account. In the list, select the administrator account
your select and then delete the account, then it will ask you if you want to keep
files etc, it's your own decision. Itknowledge24.com -
How to run an Application from Firefox?
Hello
I want to run an application from my Firefox browser, for example I want to run Notepad.exe from Firefox. I wrote the following program and it opens Notepad from Microsoft Internet Explorer successfully, but when I try to open the same page of Firefox, nothing happens. Firefox only opens it. Is there some sort of opening the Applications in Firefox? Kindly tell me how to open an Application of the Firefox browser.<script type="text/javascript" language="javascript"> function RunFile() { WshShell.Run("C:\Windows\System32\KinectClothing2.exe", 1, false); } </script>
Maybe the extension "external applications 2 buttons" at https://addons.mozilla.org/en-US/firefox/addon/external-application-button/ which is based on the extension of origin began by Torisugari over ten years ago.
-
How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.
Hi PAtwoodwu,
1. what program are you trying to install?
2. did you of recent changes on the computer?
3 does happen with all programs?
Check and make sure that the Windows service install is running on the computer.
(a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.
(b) right click on the Windows Installer service and then click Properties.
(c) if the box Startup type is set to Disabled, change it to Manual.
(d) click on OK to close the Properties window.
(e) right click on the Windows Installer service and then click Start. The service should start without errors.
(f) click on the file menu, and then click exit.
-
How to add multiple lines when the button is clicked
How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer
/ public final class screen extends MyScreen
{
/**
* Creates a new object of MyScreen
*/
ObjectChoiceField obj1 obj2, obj3, obj4.
Table of String() = {'101 ', ' 102'};
String of shadow [] = {"Shade1", "Shade2"};
Rolls of string [] = {'101 ', ' 102'};
String cutting [] = {"100-150", "150-200"};
Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
LabelField lbl1 lbl2, lbl3, lbl4;
GFM LinedGridFieldManager;
HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
VerticalFieldManager vfmMain;
public MyScreen()
{
Set the displayed title of the screen
hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
LBL1 = new LabelField("");
LBL2 = new LabelField("");
lbl3 = new LabelField("");
lbl4 = new LabelField("");
ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
hfm1.setMargin (20, 0, 10, 0);
hfm1. Add (new LabelField ("Chart"));
hfm1. Add (obj1);
hfm1. Add (new LabelField ("Shade"));
hfm1. Add (obj2);
hfm2. Add (new LabelField ("Rolls"));
hfm2. Add (Obj3);
hfm2. Add (new LabelField ("Cuts"));
hfm2. Add (Obj4);
HFM. Add (btnAdd);
GFM. Add (new LabelField ("Chart"));
GFM. Add (new LabelField ("Shade"));
GFM. Add (new LabelField ("Rolls"));
GFM. Add (new LabelField ("Cuts"));
vfmMain.add (hfm1);
vfmMain.add (hfm2);
vfmMain.add (hfm3);
vfmMain.add (hfm);
vfmMain.add (new SeparatorField());
vfmMain.add (gfm);
Add (vfmMain);
btnAdd.setChangeListener (new FieldChangeListener()
{
' Public Sub fieldChanged (field field, int context) {}
TODO self-generating method stub
selectedindex1 = chart [obj1.getSelectedIndex ()];
selectedindex2 = shade [obj2.getSelectedIndex ()];
selectedindex3 = rolls [obj3.getSelectedIndex ()];
selectedindex4 = cuts [obj4.getSelectedIndex ()];
While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
{
LBL1. SetText (selectedindex1);
LBL2. SetText (selectedindex2);
lbl3. SetText (selectedindex3);
lbl4. SetText (selectedindex4);
GFM. Add (LBL1);
GFM. Add (LBL2);
GFM. Add (lbl3);
GFM. Add (lbl4);
}
}
});
}
}Hi Piya,
I run your code, and according to your logic that it works correctly.
It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:
selectedindex1 = chart [obj1.getSelectedIndex ()];
selectedindex2 = shade [obj2.getSelectedIndex ()];
selectedindex3 = rolls [obj3.getSelectedIndex ()];
selectedindex4 = cuts [obj4.getSelectedIndex ()];Lbl1 LabelField = new LabelField("");
Lbl2 LabelField = new LabelField("");
LabelField lbl3 = new LabelField("");
LabelField lbl4 = new LabelField("");
If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
{
LBL1. SetText (selectedindex1);
LBL2. SetText (selectedindex2);
lbl3. SetText (selectedindex3);
lbl4. SetText (selectedindex4);
GFM. Add (LBL1);
GFM. Add (LBL2);
GFM. Add (lbl3);
GFM. Add (lbl4);
} -
How to freeze my application until the dialog box is closed?
Hi everyone, I wonder how to freeze my application until the dialog box is closed.
Please look at my code first:
inputDialog=new InputReadMessageNumberDialog(selectedGroup.getName(),msg,numPost,choices,values); UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { inputDialog.show(); if(inputDialog.doModal()==Dialog.OK){ System.out.println("FROM: " + inputDialog.getFrom()+" TO:"+inputDialog.getTo()); } } });
As I throw the runtime exception, then I tried to do this:
inputDialog=new InputReadMessageNumberDialog(selectedGroup.getName(),msg,numPost,choices,values); UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { inputDialog.show(); } });while(true){ synchronized(this){ if(inputDialog.isClosed) break; else wait(500); }}if(inputDialog.doModal()==Dialog.OK){ System.out.println("FROM: " + inputDialog.getFrom()+" TO:"+inputDialog.getTo()); }
She also throws an exception too. Now I don't know how to solve this problem.
Any ideas?
Thank you!
Steve
While I have deep religious convictions against the complicity of an author of the modal dialog box,
I can say that this code seems to work and these dialog box classes are easy to use. If you
Look at the API these altneratives will be pretty obvious.
but there are two usages mixed with a be commented (both
Work as much as I KNOW).
String [] ch = new String() {"ACCEPT", "REJECT"};
int [] vx is new int [] {Dialog.YES, Dialog.NO};.
D = new dialog box dialog (m_tc, ch, vx, vx [0], new Bitmap (1,1));
D = new dialog box dialog box (Dialog.D_YES_NO, m_tc, Dialog.NO, Bitmap (1,1), 0) new;
F = d.getFont (police);
d.setFont (f.derive (Font.PLAIN, f.getHeight () - 1));
int x = d.doModal ();This will block your thread until there is something to "xx."
However, I must reiterate that you evaluate the options before deciding that you need
to lock all the other options. This is especially true in this environment where things
might take some time and resources are limited.
If you want to hang your entire application, no doubt you
can define a volatile indicator around the doModal call and have other threads check it.
-
How do you put applications on the windows desktop as a shortcut form?
How do you put applications on the windows desktop as a shortcut form?
You can not put shortcuts to applications from the store to the desktop. Press the Windows key when it is on the desktop to quickly return to the start page.
-
If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...
If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.
-
original title: subject zootycoon
my computer can not be run Zoo Tycoon, when the running game does not appear anything, help me! my computer is Win7Hello
1. what version of Zoo tycoon you play?
2. is it works much earlier?
I suggest to run the game as administrator and check.
I suggest you to follow the steps from the links and check out.
Improve the performance of your computer game
http://support.Microsoft.com/kb/815069
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
-
Mr President
Jdev worm is 12.2.1
How to add two lines when the second row is not visible, but also gets the first data line too?
I want to add two lines like below picture, but want the second to remain invisible.
I asked this question but my way of asking was wrong, that's why for me once again.
Concerning
Try to follow these steps:
1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".
2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)
3. in your bookmark create button to create only one line NOT 2 rows.
4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation
5 - Open the generated class to EntityImpl and go to the doDML method and write this code
protected void doDML(int operation, TransactionEvent e) { if(operation == DML_INSERT) { SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction()); oracle.jbo.domain.Number seqValue = seq.getSequenceNumber(); setJoinColumn(seqValue); insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn()); } if(operation == DML_UPDATE) { updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn()); } super.doDML(operation, e); }
private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn) { PreparedStatement stat = null; try { String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } } private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn) { PreparedStatement stat = null; try { String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } }
Maybe you are looking for
-
Can I create a recovery bootable USB through disk utility?
My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD dr
-
Bluetooth password do not work in 100 tablets.
I have a new Tablet AT100 and passwords in the manual do not work (1234 / 0000).Can anyone help?
-
WANT DV7-7212nr: cannot upgrade to Windows 7 WANT DV7-7212nr
Hi, I have Windows 7 installation problems. I went into the Bios and enable boot Legacy also has the Dvd boot first rom. Then I started the software of windows 7. I deleted all partitions and left only 1 (primary). When creating the new partition ano
-
cannot NMCS emails Windows live 2011 because incorrect spelling server id. How can I fix it?
-
Replacing the screen blackBerry Z30 Z30 (Canada)
Hi I have a Blackberry z30 model RFY111LW number. I also need a replacement for the screen, but I I don't know what we need? I'm of the Canada. It is what is on the side of the box BlackBerry z30 STA100-5 Retail in North America-black 10.3.1 bundle