How to run disk utility see

Similar Questions

• Don't run disk utility

  Mac Pro Desk top end of 2013,

  Processor: 3.7 GHz Quad-core intel Xeon E5

  Memory: 12 GB 1866 MHz DDR3 ECC

  Boot disk: Macintosh HD

  Graphics AMD over-pants D300 2048 MB

  Operating system is the Version OS X El Captan 10.11.4

  I was working with Pages where there was a power outage at the community level. A moment later, power came. Restarted the computer, everything (files, photos, etc.) came on the screen except Pages. Pages would throw not (the spinning Beachball of Death). Then, another failure. A few minutes later, the power came. This time when I turned on and booted, open Pages with the same file I was working in the same exact place just before the first failure. Now, my Time Machine disk icon does not appear on the screen. Disc utilities don't throw (the ball of rotation range). I forced quit and restarted. Still no disk utility. I have a boot disk, so I can't run a repair disk 'outside '. Where or what I'm doing here.

  Repair of the road to El Capitan.

  1. Restart the computer. After that the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select him back (in general, Macintosh HD) entry of the volume in the list aside.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

• How to run the utility chkdsk to check the corrupt file or directory

  Alert security, stated the following: WMPSHARE.exe - the directory or the file is corrupt (X): Reader \pictures\free_agent (f_ _ _ _ _ _ e\documents\SA_Football_win [1] X) \STAT ATTAQUE Football Demo\Microsoft.VC80.MFC is damaged and unreadable. Run chkdsk.utility. ? In the search box I typed the found disk (1) check link - Scheduler of tasks went to the (X) drive looked up f___e\documents\ [1]------STAT ATTACKFootball Demo\Microsoft.VC80.MFC tried to use the CHKDSK program to no success, prior to Windows does not. in desperation I tried Systen restore not restore to an earlier version, indicating that this file was not located. at the same time (2) windows have been updated are contiguous to run which would have an effect on the problem? at this point, my depression is starting to run.  Please don't advise me to reformat to 'condition of factory oriiginal' ronfirefox PS in the future could you have Mr. Fix IT solve this problem for me I would be very happy.

  Hello

  You can follow below link that can help you to solve your problem:

  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Warning of Chkdsk.

  Important: If all data on the hard disk may be lost when running chkdsk, as the chkdsk attempts to repair that affected sector.

• Corrupt file Windows - how to run CHKDISK utility?

  I got messages saying corrupt file - WINDOWS - file or directory c:\documents and settings\allusers\application data\norton\-}oc55co96-of1d-4f28-aaa2-85ef5911267e7}n360_5.1.0.29\definitions\bashdefs is damaged and unreadable, please run the CHKDISK utility.   I don't know how to do in the face of what can someone help me?

  Open a run window (Windows Logo key + R), type chkdsk /r and press ENTER. Let him run the next time that you restart the computer or restart it now.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How can I run chdsk utility?

  I don't know how to run chdsk utility.  I get this message, and he said: it is in the c drive and it connected with aol?

  I get this message, and he said: it is in the c drive and it connected with aol?

  That doesn't sound right. Please let us know the EXACT message.

  Also, what is the make, model and model number of your PC? You have a genuine Windows XP installation CD?

• I can not run Disk Defragmenter

  I want to start Disk Defragmenter, but I always get "view and follow the download" screen pop up and nothing run!. Why is this? Help, please.

  Hello

  See if this helps you:

  "How to run Disk Defragmenter from the Vista command prompt"

  http://www.Vistax64.com/tutorials/81786-Disk-Defragmenter-command-prompt.html

  ________________________________

  Information on defragmentation;

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

  Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

  How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

  Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

  (141083)

• How to run the chkdsk utility

  I need to know how to run a chkdsk utility laptop always tells me that I have a corupt file and to run, but I can't understand how do

  There is a link in the post above say you how to operate!

  Your computer does not seem to allow links to work, I'll post it for you:

  1. Click Startand then click run.
  2. In Open, type cmd and then press ENTER.
  1. Use one of the following procedures:
  • To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.
  • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk/f and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk/r, and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Free Support Tools

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Drive external hard Mac has shown in the past but does not now show in disk utility. How can I get it back?

  I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.

  I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.

  I hope someone can help.

  Hi willy of San Jacinto.

  I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.

  Read this article on troubleshooting USB devices:

  OS X El Capitan: If a USB device does not work

  If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.

  Thank you for using communities of Apple Support, cheers!

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Disk utility seems different in El Capitan - how to format a Seagate HDD to my MacBookPro which now operates under El Capitan?

  Disk utility seems different in El Capitan - how to format a Seagate HDD to my MacBookPro which now operates under El Capitan?

  There is a sharing on the top button. Select the Seagate to reformat.

• How can I display the partitions hidden in the new disk utility?

  Yosemite (10.10) and previous versions of disk utility, I was able to activate the debug mode display the partitions hidden recovery via a Terminal command.  However, in El Capitan (10.11) the terminal command does nothing.  So, how display/display the partitions hidden in El Capitan?

  I am using a disc external HARD for a diagnostic tool and I don't want the scores of recovery on the outside so that I have save space.

  in Terminal type

  diskutil list

  This command is always the same in ElCapitan.