Whenever I start up firefox any version, the program asks to reinstall each addon installed, or tells me they are incompatible.

Similar Questions

• Cannot install Adobe 9.3 (or any version) - the program will download but will not install

  Adobe Reder 9.3 Installer Info

  Error 1935.  An error occurred during the installation of assembly component

  (98CB24AD-52FB-DB5F-AO1F-C8B3B9A1E18E). HRESULT: 0X8007054F

  Am currently using Vista Home Premium - tried to @ microsoft online help but cannot go beyond Administrator error, also, will not accept the number of product (from the computer itself) - also tried the Adobe help page which was pretty much useless...

  This error usually indicates a problem with the .NET Framework (one of them at least).  Because the 2.0 and 3.0 are part of the Vista operating system they cannot be uninstalled and reinstalled without any Vista at the same time.  But sometimes CFS can fix problems of frame (as can a chkdsk if a framework file is located in a corrupted sector or block).

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then try again and see if you get the same error.  This time right click on the system icon and then click on run as administrator (sometimes it helps and it can't hurt).

  If it persists, try the following:

  1. Open an administrator command prompt: start > all programs > Accessories > right click on command prompt and select "run as Administrator".
  2. In the command prompt, type the following command:
     true fsutil resource setautoreset C:\
     This assumes that C: is the drive where Vista is installed. If it is installed on another drive as D:, please change the appropriate drive letter.
  3. Restart the system.
  4. Installation of Acrobat or Adobe Reader again.

  I hope that one of these solutions works. Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installed Sonic RecordNow DELETE. Ste 7.0, but the program says that my readers arwe set to 'off '. They are not. What's wrong?

  Program installed but starts it gives the error that my readers are set to disabled. (DUH!) My drives are NOT set to off. I know that the program is not compatible with Win 7 (element DLA not install), but it is not necessary to start the program.

  So, what's the problem?

  Duplicate thread:

  I have a problem with RecordNow 7.0.

  When I run the program, I get a message that says that my drives are set to disabled. they are not. I had this problem before and resolved, I think, by installing the latest PX engine update. This time, however, that has not worked. Any ideas?

  Hello

  Given that the program is not compatible with the windows operating system 7 install the program in compatibility mode.

  Most programs written for Windows Vista also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.

  To run the troubleshooting program compatibility Troubleshooter

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome

• Power went off looking at the TV Media Center. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.

  Original title: Media Center 2005 Edition

  I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off.   Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.  The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen.  I can click the X (close Box) and the program closes.   I expect there are only one or two corrupt files that need to be cleaned or replaced.

  HP support is to use recovery discs to clear the system and return it to the original configuration.   Given all the software, data and updates, I have to restore, I don't want to go down this road.

  I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons.  I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing.

  I go back to the original driver TV tuner and then updated to the more recent but not joy.  I think that the problem is with a program or file Media Center.  Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black.

  I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution.

  Hi, Rudy386MS,

  Sorry for the late reply.  Do you have the problem solved?

  If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair.  The alternative is a complete recovery of Windows.

  Open the control panel and select Media Center

  Click on uninstall

  Select the repair option

  Click next

  Click Finish when you are prompted

  See if that helps.  If not, then the recovery process will be needed

  Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key.  According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition.

  There is a Recovery Manager in the folder all the HP programs which includes Disc Creator.  You can create your own recovery discs.  I suggest using DVD instead of CD - R.  They allow more memory space.

• Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.

  Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.  This happened for several months, but I just ignored him.  Don't know if it's related, but a user cannot disconnect without pressing the Windows key and the "L" key at the same time.

  Tonight I ran a registry repair program, and it fixed a lot of errors.  But, always, the message came after a reboot.  I don't know what it is, what it does or how to remedy the situation. Can anyone help?

  Thank you!

  You may have damaged even more by running a registry cleaner for Windows. The best registry cleaners are snake oil, and at worst they will damage MS Office and sometimes Windows itself. Details:

  http://aumha.NET/viewtopic.php?t=28099

  For the problem, Googling for this file appears your post. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". »

  Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". "for my external drives.  I use these daily backup USB drives. It seems that the backup will run, if I acknowledge this message by clicking OK. If this is not the case - it won't. Why is that happening and how can I solve this problem?

  You can repair the associations used to readers.  One of my fellow MVPS, Shawn (no relationship lol) has default binding settings in his site here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Just scroll down to find the link of 'reader', click it, and launches the link.  You can do the same thing with "folder" and "directory" to be thorough.

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  No, it's a scam, ignore the call.

  Just hang up, they are trying to steal your information or to install a virus on your PC.

• I try to open a work at home and the program asks us when starting:

  I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

  I try to open a work at home and the program asks us when starting: "you are not an administrator on this computer. Please add your id to the local administrator group on this computer. "How to do this while my account is already an admin?

  Instead - right-click on anything whatsoever that you try to open and choose 'Run as administrator'.  Best?

• Firfox does not remember my saved passwords, passwords do not forget in the Security tab is checked if one is an internet Explorer, they are

  Firfox does not remember my saved passwords, passwords do not forget in the Security tab is checked if one is an internet Explorer, they are

  • Websites to remember you and automatically log you in are stored in a cookie.
  • You need a cookie exception allow (Tools > Options > privacy > Cookies: Exceptions) to keep this cookie, especially for secure Web sites and if we let the cookies expire when Firefox closes
  • Make sure that you do not remove the navigation, search and download history on Firefox to clear 'Cookies' and 'Site preferences.

  Compensation of the "Site Preferences" clears all cookies, images, pop-ups, installing the software and password exceptions.

  • http://KB.mozillazine.org/Password_Manager
  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• I have a new computer with Windows 10 and will use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program for Adpbe and when I install it so I put my serial number and get the answer, it is not a number valid serial. What it takes

  I have a new computer with Windows 10 and I use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program from Adobe, and when I install it then I put my serial number and get the response "is not a number valid serial. What should do? I have an account at Adobe with all my serial number

  Hi rolfb13339293,

  I would like to inform you that acrobat 9 is not compatible with windows 10.

  You can check system requirements here: Adobe Acrobat required configuration

  The latest version is Acrobat DC.

  Please let us know if you need additional assistance.

  Concerning

  Sarojini

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• When I download emails that I get the integration of the structure of the program is corrupted reinstall the program.

  error

  When I dowenload emails I get the integration of the structure of the program is corrupted reinstall the program

  I fixed it thank you now for your help...

  YW