Similar Questions

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Is it possible to save a layout of the custom toolbar?

  Is it possible to save a layout of the custom toolbar?

  Print the help to the page layout, I can pretty well do memory...

  Once you have freshly generated the page layout you want

  1. Open your profile folder by typing about: support int the address bar (or help > troubleshooting information...)
  2. Click Open containing folder
  3. Use file > exit or "Firefox" button > Exit to exit Firefox (not the ' X' top-right that just closed the window)
  4. in your profile f older localstore.rdf select and copy ('Ctrl + C') then in short tights to make a copy, repeat the steps to create at least a copy, the original and the "localstore - Copy.rdf" and the "localstore - copy (2) RDF" will all be the same, about 4 KB to begin with. (not 18KO not 76 KB)
  5. Replace Firefox.

  Freshly generated means rename or delete the localstore.rdf original while Firefox is down, restart Firefox and customize your toolbars as you want.

  If you have a problem with a corrupt localstore.rdf put Firefox down and in your profile directory, delete or rename the localstore.rd then rename a copy of localstore.rdf

  Reference: http://kb.mozillazine.org/Corrupt_localstore.rdf see references to the backup copy, you must, of course, take periodic backups of all your personal data, and for Firefox, which includes your profile.

• How can I disable protection of the customer

  How can I disable protection of the customer

  Hi pitellu,

  ·        What antivirus do?

  ·        Is it avant-garde or Microsoft Security Essentials?

  You could disable by using the parameter unless there is that a policy applies by administrator preventing turn he took.

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

  Thank you and best regards,

  Imran M - Microsoft Support

• How to save an image in the body of an email?

  How to save an image in the body of an email? All I get is exemplary, not save as.

  How to save an image in the body of an email? All I get is exemplary, not save as.

  ===========================================
  Take a look at the following articles:

  Open or save an attachment in Windows Mail
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-or-save-an-attachment-in-Windows-Mail

  Parts attached email Windows Live Mail - open and save
  http://www.webdevelopersnotes.com/tips/windows_live_mail/windows_live_mail_attachments_open_save.php

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.

• How to save external files in the logical project?

  Didn't know how to phrase the question. Here's the question. Ex: someone sent me an audio file to add to my project of logic and I have it drag my desktop and everything is all fine and good. I save the project, and then proceed to remove the audio file from my office. I then go back to open my logical project and it says that it cannot find the file. In Garageband, once I recorded an audio file project, it is always there even if I deleted it from my office. But in the logic, it does not do this. Is it sort of permanently save/integrate a file in a project of logic, so that I can remove from my desk and there not try to pick him up every time at the opening?

  

  Hello

  You must have the logic to copy the files:

  For new projects, use file > save and make sure that "Copy the following files to your project" is enabled for audio files.

  

  For existing projects, or file > save as, then check the same box

  or

  File > project settings > active

  

  TDC

• Re: How to transfer movie recorded on the decoder?

  My laptop is a Toshiba dv6-1375. I have Cox cable TV with a SA Explorer 8240 DVR provided Cox.

  How can I transfer recorded content from the video recorder DVR HD my laptop? I know how to connect the cable DVR to my standalone DVD burner - using standard cables 'red-white-yellow' and can save to it.

  But I would like to connect the DVR _directly_ cable to my laptop and therefore to transfer the data backed up to it. I guess I could connect the audio cable to the microphone of my laptop, but how can I connect _video_ leave the VCR DVR to my laptop?

  Thank you.

  The f

  Hey,.

  To be honest, I never heard of Toshiba notebook dv6-1375. Such a model is not known to me

  In any case, I think that this transfer is possible only when your computer has a video in the port and most laptop computers have only one video signal.

• How to save data quickly to the high sampling frequency

  Hi all

  I use a structure of producers and customers to measure and record the data. The sampling rate must be as high as 10 kHz. Given that so much data, it takes a long time before the data is saved. At first, I saved the data in an excel sheet. Then I tried to save it in binary, but it still takes a while to complete save. How can I make the time savings a short circuit?

  Thank you

  The best

  First we will make some corrections to your DAQmx code.  Since you are using continuous sampling, do NOT connect the samples per channel.  Which is actually limiting your buffer.  And there is really no need to define your buffer size either.  It is default to very big, so this isn't a problem as long as you read your data quite often.

  Now your data connection... You simply create a very wide range while acquiring data.  Then, you save the data.  It's actually not through the advantage of using the producer and the consumer.  You should save your data in the loop of the consumer.  It will be elinate need a lot of memory and you save the data to the file while you are buying.

  But, in this case, I say that the producer and the consumer is not even necessary.  Use the DAQmx Configure registration VI.  With this VI, you can tell DAQmx to disseminate all data directly in a PDM file.  You don't have to do anything.  It is by far the best way to save on your DAQ data.

  

• How long can I record with the soundrecorder?

  I need to record some interviews which will have more than one hour each. The easiest way for me would be to take my laptop and write it down. My question: if I use the normal soundrecorder, how long can I record? Is it possible to save over an hour? Thank you!

  I would expect that you could take an occasional break in such
  a long interview... to create several files might not be a bad
  idea... but I think it will continue to record until you use
  all your free space.

  The following article can offer a few ideas:

  Windows Vista sound recorder
  http://www.JakeLudington.com/windows_vista/20060524_windows_vista_sound_recorder.html

• How to save a bitmap on the device?

  Hello

  I have a bitmap image, which I have created a few bytes I get from server. Now, I want to save this file on my device. How can I achieve this?

  Thanks in advance

  That's how I saved my image on the device

  FileConnection fconn = (FileConnection)Connector.open("file:///store/home/user/screenCapture/image01.bmp",Connector.READ_WRITE);

  if(!fconn.) Exists())

  fconn. Create();

  OutputStream out = fconn.openOutputStream ();

  Bitmap image = Bitmap.createBitmapFromBytes(tempJpegBuffer,0,tempJpegBuffer.length,1);

  if(image == null)

  System.out.println ("null image");

  else {}

  out. Write (ReceiveThread.tempJpegBuffer);

  out. Close();

  }

  fconn. Close();

  } catch (Exception e) {}

  System.out.println ("Exception:" + try ());

  e.getMessage ();

  }

  and display the image recorded as by peter has mentioned above

  :-)

• BlackBerry Smartphones Email attachments - how to save an attachment to the device memory or media card?

  I have a BlackBerry 8310 Curve, which we got up to speed up our translation services.  the thing is that we have received a document attached, and we could not know how to SAVE the attachment to either the memory card or peripheral support, which would then allow us to transfer it directly to the laptop to work on.

  The temporary solution we found was to convey the message to a different email address and download it to your computer. For some reason any later we could not attach the document to email the map of media either, so we had to email from the laptop to the blackberry, and then forward it to the client.

  So, my questions are:

  How to save an attachment to an e-mail message OR the card memory or device support?

  How can I attach a document to an email when ATTACH it to does not display the file in the folder? (of course I've already put it there)

  and as a side note

  Why I could open the email attachment I had forwarded to the blackberry, but I could not open the original document (the two word .doc) sent customer e-mail.

  Here are the details of my laptop: Win XP Home edition, Service Pack 3

  lordsnotball wrote:

  I have a BlackBerry 8310 Curve, which we got up to speed up our translation services.  the thing is that we have received a document attached, and we could not know how to SAVE the attachment to either the memory card or peripheral support, which would then allow us to transfer it directly to the laptop to work on.

  The temporary solution we found was to convey the message to a different email address and download it to your computer. For some reason any later we could not attach the document to email the map of media either, so we had to email from the laptop to the blackberry, and then forward it to the client.

  So, my questions are:

  How to save an attachment to an e-mail message OR the card memory or device support?

  How can I attach a document to an email when ATTACH it to does not display the file in the folder? (of course I've already put it there)

  and as a side note

  Why I could open the email attachment I had forwarded to the blackberry, but I could not open the original document (the two word .doc) sent customer e-mail.

  Here are the details of my laptop: Win XP Home edition, Service Pack 3

  Unfortunialy up to what your phone is updated with OS 4.5 the only way is to do it as you have in the past or I'm sure there are some programs that you can buy until you do not upgrade.

• How to save a file in the Dreamweaver CC folder on my hard drive?

  Hello

  I bought Dreamweaver CC.  I'm putting a flash button in Dreamweaver that will appeal to another web site.

  The problem that I am running is when I try to save the 'flash' button in the folder on my computer of Dreamweaver.

  I get a message saying "Contact your administrator" because it won't save to this place.

  I know that I need to save it in the Dreamweaver folder so there the same way, so the flash with a link button does not work.

  How to save a file I want to put into a Dreamweaver page in my Dreamweaver CC file?  I get that

  Contact your message from the administrator.

  Help, please

  John

  Teacher of students wrote:

  How to save a file I want to put into a Dreamweaver page in my Dreamweaver CC file?

  John

  Honestly, you do not have.

  DW is intended to be used with a "Local Root folder" for each site that you create with it. You should never have a reason to record in the program of DW records. Take a minute to review the creation of a Site definition in DW...

  http://TV.Adobe.com/watch/learn-Dreamweaver-CS5/GS01-defining-a-new-site/

• Test the microphone works, but I can't save with recorder to the computer.

  I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try these steps and check:

  a. Click Start, open Control Panel.

  b. click sounds, click the recording tab.

  c. click microphone, and then click Properties.

  d. under the controller information, check if the correct sound card is selected.

  e. click on the advance tab, under exclusive mode uncheck both boxes.

  f. click on apply, then ok.

  Check if it helps.

  Method 2:

  Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• How to display specific records on the form of the ADF

  Dear experts,

  I need to create a form of adf Wizard.

  -If the user is new, this form will show action createInsert.

  -If the user is not new (already have saved data), then this screen displays data based on the user login id.

  I can do the application module class createInsert part but not the specific data display part.

  You have a suggestion how to display specific records based on user login id, and how to filter the old and the new user?

  

  Kind regards

  Ricky

  You can use a router in a workflow as I've shown here https://tompeez.wordpress.com/2012/12/01/jdeveloper-11-1-1-5-0-use-router-to-create-new-row-or-edit-existing/

  Timo