How to save stationglobals the disk in Labview
Hi, can anyone suggest me how to save the values of stationglobal the disk when my vi is running? I update the stationglobal property set API TS call in my vi. But when I left the TestStand and open again the old values of stationglobal are still there and not news. What should I do to update the values of stationglobal? If anyone has any sample vi please provide me.
Thanks in advance,
Nadie
Try this. You don't mention the version of LabVIEW, you use so I recorded to 8.0.
Tags: NI Software
Similar Questions
-
How to save encodedImage the disk?
Hi, how can I save an image specified by me on the path of disk?
PNGEncodedImage _pngEncodedImage = PNGEncodedImage.encode (_bitmap);
I need to save some _pngEncodedImage on the disk.
Kind regards
This isn't what I suggested... Normally to save it to the SD card using the code like this
FileConnection fc = (FileConnection)Connector.open(System.getProperty("fileconn.dir.memorycard.photos"+"TestImage.png",Connector.READ_WRITE);if(!fc.exists()) fc.create();OutputStream oStream =fc.openOutputStream();oStream.write(yourPNGEncodedImage.getData());oStream.flush();oStream.close(); fc.close();
Then, when you run the application, in the Simulator, simulation-> change SD Card... Choose a direstory on your pc after recording, screenshot is done with your application, look for the image in the configured folder...
See you soon...
EDIT: OH! Is in edit mode.
-
I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?
original title: reinstall Windows VistaI was getting a new hard drive to my HP laptop. Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?
Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.
-
How can I recover the disk space on esx
yesterday, I removed two my esxi machine vm - I remove disk thinkng it could free up space disc instead of 'delete inventory '.
my box of esx has about 334 GB in its datastore1
I don't have a virtual machine in esx box and that vm's only 143 GB on its two disks, however my datastore1 only show it is has about 80 b of space left.
1. I did something wrong is eliminating the VM boxes that do not free until their allotted disk space?
2. How can I recover the disk space I know is free so that I can port on another machine on esx box?
Thanks in advance.
Hello.
Try to use the browser to store data on your data store 1 and see what files are actually there. Sometimes things get left behind and need to be cleaned manually.
Good luck!
-
How can I install the disks 2 and 3 Please help
How can I install the disks 2 and 3 of my new adobe Elements 10 - after the first disc I couldn't out disc and then I hit ok and it went away installation mode
This is because the dialog is simply a reminder to insert disc two. When you have finished installing disc one then please insert disc two if you want to install the content on this disc. You can find more details about what is included on the disks to install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.
-
I bought two modules of memory to upgrade my HP s5250t model, but the disk drive is in the way. How can I move it so I can access that 4th slot?
ohgioia2 wrote: I bought two modules of memory to upgrade my HP s5250t model, but the disk drive is in the way. How can I move it so I can access that 4th slot?
Hello ohgioia2, here is a link that contains information. I don't know if that's enough to get the last memory module.
I don't think you would need to completely remove the DVD disc, but just push forward enough to access the memory.
-
How to see if the disks are low spinned
Maybe a stupid question, but how you can see that the disc is spinned down?
On my Duet of readnas you can see it on the disc flashing led, but the RN104 has according to the manual.
Did some research on Google before asking here, someone said that you can see in the newspapers, but he can't see in the newspapers in the façade.
I am Dutch and do not want to waste energy and check if the disk to spin down fucntion works.
BTW os6.4.2
EdjeDek wrote:
Maybe a stupid question, but how you can see that the disc is spinned down?
Download logs (zip file) and then look in spindown.log -
How can I get the Disk Defragmenter to work?
Disk Defragmenter won't start for defragmentation, what I do?
Hello
You should ask this question in the answers – Windows Forums for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows--------------------------------------
Defrag problems are often related to the corruption of disk.
Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlGOLD:
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html----------------------------------------------------
For even better and more efficient to check:
At the Recovery Console prompt (if you have one) or from a Windows 7
disc - if you do not have a Windows 7 disc you can borrow a friend (it must be the same 32
or 64-bit, and they are not protected against copying) or make a. Also your system manufacturer will sell the
physical disks cheap since you already own windows.Chkdsk /f /r
RESET
After k and before space / f and before.
sfc/scannow
RESET
Space after c and before.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7----------------------------------------------------------------
If CheckDisk is unable to fill as above:
If ChkDsk does not start in Windows 7 or Vista
http://www.WinVistaClub.com/T50.htmlHow to difficulty Chkdsk will not run at startup in Vista (Windows 7 is the same)
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html------------------------------------------------------------------
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.If you need to repair disks - these help repair Windows not re-install.
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html=====================================
If there are still problems of disc:
Manufacturer diagnostic utilities - run one to your hard drive
http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.htmlCorrected list dated 06/09/2010
Fujitsu hard drives: utility of diagnosis here
http://www.Fujitsu.com/EMEA/products/HDD/Hitachi hard drives: utility of diagnosis here
http://www.HitachiGST.com/support/downloads/IBM hard drives: use Hitachi utility *.
Toshiba hard drives: use Hitachi or Maxtor utilities
Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
http://www.Seagate.com/www/en-us/support/Quantum hard drives: use the Maxtor utilities
Seagate hard drives: here Diagnostic utilities
http://www.Seagate.com/www/en-us/support/downloadsConner hard drives: use the Seagate utilities
Hard drives Samsung: utility of diagnosis here
http://www.Samsung.com/global/business/HDD/Hard drives Western Digital: utility of diagnosis here
http://support.wdc.com/product/download.asp?lang=enTrial versions of one of these 'might' help.
SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/===========================================
New settings command-line command for Defrag.exe in Windows 7
http://www.Winhelponline.com/blog/new-defrag-cmd-line-parameters-Windows-7/Defrag options in Windows 7
http://www.thewindowsclub.com/defrag-options-in-Windows-7Defragmentation of the command-line for more control
http://TechNet.Microsoft.com/en-us/magazine/ff458356.aspx===========================================
Here are excellent free 3rd defragmenters party which I use.
Auslogics Disk Defrag - FREE - works easily and does a great job
http://www.Auslogics.com/en/software/disk-defragVery powerful - FREE - MyDefrag
http://www.MyDefrag.com/Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
This compact and portable Windows application supports NTFS and FAT32 file systems.
http://www.Piriform.com/DefragglerAlso check this and other "related links" here:
How to use Windows 7 Disk Defragmenter
http://www.SevenForums.com/tutorials/11733-Disk-Defragmenter-open-use.htmlHow to enable or disable the Windows 7 Disk Defragmenter schedule
http://www.SevenForums.com/tutorials/3292-Disk-Defragmenter-schedule-turn-off.htmlI hope this helps.
-
How do I run the exe of labview with command line
I would like to launch an exe of labview with a command line.
I would like to get advice how to launch the exe of Labview with give values to the control settings?
You can view the example where x, there are controls
There is a more detailed guide here, I reference below:
1. first of all, you can enable it in settings:
1. open the properties for a version of the application specification
2. navigate to the Advanced category
3. check the pass all arguments on-demand command line
To pass the arguments to command line to request and access in your code follow the same steps as for LabVIEW 7.x.
-
On my old computer with Windows XP, I downloaded different files on the floppy drive. Each of the disks have been formatted before that I downloaded. With my new system which is Vista, I had to put an external floppy drive to read my files, but when I put the disc, it tells me they need to be formatted. I tried the disks in my computer at work (which has XP) and he tells me the same thing. How can I get information on these disks without reformatting? Or why is it telling me that formatted disks before have format again?
This error message indicates that the drive is damaged and the data on it can no longer be read. If this is happening in two different disk drives then it most likley means that disks have failed.
-
How to save only the selected line
Hi all
I have a page master / detail with two regions advanced table.
Region of the main table has a transient 'SelectFlag' attribute to display the detail records.
When I make a few changes to a master record and save it is save all records on the page.
I want to save only the selected record.
How to get there?
Help, please. :)You need to loop through the rows using RowSetIterator.
Reference http://oracleanil.blogspot.com/2010/05/delete-exercise-delete-row-from-table.html
-Anand
-
How to save all the files associated with a Web site?
I'm an administrator (but not the creator) of a Web site that I am responsible for the update. I don't have the documentation that I need to do some of my tasks. So I thought that I could find enough simply to save the site from Firefox.
The last time that I have this (several versions of Firefox there is), there is a command "save under" which would save the main HTML file in your selected folder AND save all the subsidiary referenced files in a single subfolder, so built a local version of the site.
When I tried this today in v20.0.1, the two options "Save As" only created a single file of the current page with all the original references links on the left.
Is there another way to 'dumping' of the entire application on my hard drive?I initially save as "Web Page, complete"? , but the hrefs all mentioned on the real web site, not to any local versions.
I also tried the Scrapbook addon. It does not seem to do what I want, but I can't find where it stored all the files. I'll be back with the author of the album.
PS. Why can't I find setting controls in shape when you enter a question?
-
Please help I don't have the money to have someone come out and look for me.
Welcome to the Microsoft Answers community.
System Restore and the temporary files can be placed on your hard drive, but can easily be recovered.
Try the utility Disk Cleanup to delete files and system restore points that you can safely remove.
You can start disk cleanup, by doing one of the following:
- Click Startand then click run. In the Open box, type cleanmgr, and then click OK.
-or-
- Click Start, point to programs, point to Accessories, point to System Toolsand then click on Disk Cleanup.
-or-
- In Windows Explorer or my computer, right-click the disk in which you want to free up space, click Properties, click the general tab and then click on Disk Cleanup.
Remove files stored on your hard drive
To remove files stored on your hard disk that you no longer use, follow these steps:
- Click Startand then click my computer.
- Right-click the disk in which you want to free up space, and then click Properties.
- Click the general tab, and then click Disk Cleanup.
- Click the Disk Cleanup tab (if it is not already selected), click to select the check boxes beside the files that you want to remove, and then click OK.
- Click Yes to continue it with this action, and then click OK.
Remove Windows components
To remove Windows components that you don't use, follow these steps:
- Click Startand then click my computer.
- Right-click the disk in which you want to free up space, and then click Properties.
- Click the general tab, and then click Disk Cleanup.
- Click the Other Options tab, and then under Windows components, click clean.
The Windows Components Wizard starts.
- In the components list, clear the check box next to the component you want to remove.
- A checkbox grayed out next to a component indicates that only some of its subcomponents are installed.
If you want to remove a subcomponent, click Details, clear the check box next to the subcomponents that you want to remove, and then click OK.
- A checkbox grayed out next to a component indicates that only some of its subcomponents are installed.
- Click Next.
- At the end of page Windows Components Wizard, click Finish.
- Click OK, click Yes to proceed with this action, and then click OK.
Remove installed programs
To remove programs that you no longer use, follow these steps:
- Click Startand then click my computer.
- Right-click the disk in which you want to free up space, and then click Properties.
- Click the general tab, and then click Disk Cleanup.
- Click the Other Options tab, and then under installed programs, click clean.
The dialog box Add / Remove Programs is displayed.
- In the currently installed programs list, click the program that you want to remove and then click Remove (or Change/Remove).
- If you are prompted to confirm the removal of the program, click Yes.
- Repeat step 5 and 6 to delete other programs you use is no longer and then click close.
- Click OK, click Yes to proceed with this action, and then click OK.
Delete restore Points
To delete all points except the most recent restore restore point, follow these steps:
- Click Startand then click my computer.
- Right-click the disk in which you want to free up space, and then click Properties.
- Click the general tab, and then click Disk Cleanup.
- Click the Other Options tab, and then under System Restore, click clean.
- Click Yes to remove all but the last restore point.
- Click OK, click Yes to proceed with this action, and then click OK.
I hope this helps!
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. - Click Startand then click run. In the Open box, type cleanmgr, and then click OK.
-
How can I get the Disk Defragmenter to work under Vista?
Disk Cleanup cannot get Disk Defragmenter to work.
Hello
I wasn't a big fan of the disk in vista Defragmenter
Download a little program called auslogic disk defrag and its FREE and works very well!
http://www.filehippo.com/search?q=Auslogics
Concerning
GT4U
-
Satellite L300 - how to save on the E: drive?
Hello
My sister seems to have problems with his hard drive, he said that it is almost full (vista drive (c :))) a message keeps coming up)
I was wondering just how she can start using the E: drive. Is it possible to change the settings on the computer so that everything is saved on disk E
I don't know much about computers but would really helpIt is Toshiba Satellite L300 and Windows Vista 32 bit
Thanks maz
Hey Buddy,
You can use drive E all the time... ;-)
The point is that most programs will be installed on the C drive, so you should choose drive E, if you want to install.
In my opinion the best option is if you save all important files and private on second drive E. I mean these files like photos, videos, music, documents, etc. He just copy and post it on the E drive, everything that s! :)
Maybe you are looking for
-
How to make a digital recorder for imac, 2007 transfer, ElCapitan. USB, Recorder does not recognize.
-
Trying to leave my site of the Fund, I get an error message:
"A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. Script: http://www.aftrasagfcu.org/toolkit/presentation/shell/aftrasag/assets/default.js:265. » Is thi
-
Hi all My lenovo y5070 has a intel i7 4720hq clocked at 2.6 ghz with the mode up to 3.6 ghz (this is what its supposed to be). I noticed (using Task Manager) the fact that the processor will only up to 3.3 ghz under full load. I need to mention that
-
original title: volume issues I recently rebooted my computer and the volume device does not work, how can I add volume device to turn my volume to work?
-
None of RNS, te0 &; te1 clock source work except OnbordClock for cDAQ9174?
acquisition system used: cDAQ-9174, NI9206, Labview2009, OR-DAQmx 9.2, MAX 4.7.1 Referring to the "specifying different sample rates for CompactDAQ Modules multiple", following time engines could be used for cDAQ9174 (AI, te0 & te1) / cDAQ1/I/SampleC