How to select text and be able to change the font without the text highlight color effect reverse?

Similar Questions

• How to select text in CD player?

  How to select text, then copy the text in MS Word?

  Hi Edwin,.

  Make a right click anywhere on the page and choose the 'selection' tool, then you can drag it over the text and then right-click in the selection and choose 'Copy' and then switch application to MS word and paste there.

  If you are unable to select and copy text, either it's a scanned pdf document or it has implemented security restrictions.

  Kind regards
  Rahul

• How to select, copy and paste (with translation into English) a Spanish PDF document, for example, Google Translate?

  I have a 64-bit Windows 8.1 PC and use Internet Explorer 11 or Windows Chrome. Can someone talk to me through selection, copy and paste a PDF document in general? As well as my occasional to translate Spanish Pdf document need, I also like to know how to select, copy and paste into Notepad or WordPad, an e-mail or a document. I tried everything I can think but cannot make it work.

  Just FYI: If you have PDF documents online (which contain 'real text' of course), you can also use Google Translate to translate the entire document.  Click 'translate a document' under the entry field.

• How can I add a right click Menu mouse to click 'CANCEL' * and * "REDO" button to change the text in Firefox?

  How can I add a Menu with the right mouse button to display a "UNDO" AND "REDO" button to change the text back in Firefox without losing or forgetting the changes as I can under Google Chrome? -OMG I told dinnt - SORRY!

  Glad you stuck with this issue cuz I pulled a real boner trying to fix. I was totally distraught on the main menu of * two * UNDO and REDO. If you remember that I tried to install the menu shortcut for UNDO them and REDO and totally rejected the idea that they might be under Edit on the crazy Main Menu which of course, they have been and worked like a charm. THANKS again man, you are a true hero!

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• How to select files in a directory by typing the first letter of the name as in 95 - > XP

  How to select files in a directry by typing the first letter of the name as in XP

  Something has changed on my copy of Vista 64 bit Home Premium edition, and now when I try to type the first letter of a name of file to access it, rather Vista puts in the search box in the upper right corner of the window.

  It's counterproductive and annoying _ out of me. I want to jump for filenames beginning with that letter, not clear the screen and show the stuff that is not in the current directory. Especially since I regularly work with earlier versions of windows.

  How should I do so that I can type in the names of files in Explorer and jump to files beginning with this letter as in all previous versions of Windows since at least win95?

  Go to start / Control Panel / folder Options / view and scroll down where it presents two options when entering in the list view.  Check the box to select the item type in the view.  This is part of what you want.

  If you type a letter, it will go to the files/folders starting with this letter (and not the search box); However, I just tried it myself and it seems to work only for the first letter.  If you type in a second letter, he will then the files/folders starting with THIS letter instead of files that begin with the first letter typed and then refining to files beginning with the two first letters typed and so on.  I can't make it work any better than this - unless I type really fast (and it seems to work as it should most of the time).  And I want really fast.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I downloaded an attachment in Notepad and you want to change the word. How can I do this?

  I downloaded an attachment in Notepad and you want to change the word.  How can I do this?

  Right click on the saved file.
  Select: Open with on the shortcut menu.
  Click: Choose [default] program.
  Select: Word.
  Check: Always use the selected program to open this type of file.
  Click OK.
   

• My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I do my wo

  My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?

  I use Lightroom 6.4 on a Pc with Windows 10.

  Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.

  If this does not work, please post a screenshot of the problem.

• How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of chan

  How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.

  Three things I can think of:

  Your document must be in RGB mode.

  Layer blending mode should be set to Normal

  Masks are grayscale. If you select the mask, you cannot apply a color.

  Always check your tab at the top to see if what you choose is RGB or grayscale.

  Gene

• How can I copy and paste a page in the same DC Adobe .pdf?

  How can I copy and paste a page in the same DC Adobe .pdf?

  Open the Page thumbnails. You can select the pages and then drag the pages. When you hold down the CTRL key you can copy pages.

• When the signer will sign on the doc that I want to fill the date today, and he should be able to change the date

  Hello world.

  I joined salesforce with echosign.

  I need a help, whenever signatory 2 goes to sign on the doc I want to fill the date today and the signatory 2 should be able to change the date preceding the date of signature. 

  Hello

  So firstly follow the post on the forum to create a formula in salesforce field that creates the date as a string and this merge field in an agreement echosign.

  For example, configure the following field to receive the sfdc date string:
  {{todayeditable_es_:signer1}}

  of course to call the field all you want and also assign the right if not signer signatory 1.

  You can then add a calculated field that compares the date in the field of the todayedtiable against today's date

  {{datecheck_es_:signer1:calc(if(date([today]) > now(), "today larger than today", "continue to next step"))}}

  so, for example today's date is February 12, 2015
  the date entered in the todayeditable field is
  12/02/2015
  the audit date field will say "contine" (or whatever text put you between quotation marks)
  If the date entered has been
  13/02/2015
  datecheck displays "today higher than today.

• How can I make and delete a snapshot of the command line in ESXi 4?

  How can I make and delete a snapshot of the command line in ESXi 4?  ghettoVCB4i does, but I need unusual behaviour for two virtual machines.  I need to be able to save only one of the two virtual drives, not both.  So I can't use this script here.  I need to write a script that will:

  1 copy off the .vmx

  2 make a snapshot of a virtual computer running

  3 use the vmkfstools command to clone the vmdk in the backup location

  4 remove the snapshot.

  The snapshot is the part that I do not know how.  I do not see a flash drive in vmkfstools and I do not understand the snapshot code in ghettoVCB4i.

  Thank you!

  vmkfstools is a tool for working with VMDK, has nothing to do with stereotypes. In the Busybox unsupported console, the only tool that you can use for some of the management of the virtual computer is vim-cmd , which is about a wrapper for VMware vimsh, take a look at our site for more information: http://engr.ucsb.edu/~duonglt/vmware/#vmware_vimsh

  Basically, you're going to do something like the following:

  vim-cmd "vmsvc/snapshot.create XXXX FIRST_SNAPSHOT MY_FIRST_SNAPSHOT_1"
  

  where XXXX is VmId to the virtual machine that is retrieved from vmsvc/getallvms, then you are going to deliver the snapshot.remove

  Here are some other useful commands dealing with snapshots:

  Vim - cmd vmsvc/snapshot.removeall \[VmId]

  [[[vim - cmd vmsvc/snapshot.remove \[VmId\] \[removeChildren\] \[snapshotLevel\] \[snapshotIndex\]

  Vim - cmd vmsvc/snapshot.get \[VmId\]

  ghettoVCB4i uses vimsh to do these things as well.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Not able to change the password by using the query. Select APPS.fnd_web_sec

  Not able to change the password by using the query.
  Select APPS.fnd_web_sec.change_password ('username', 'password') 'RES' double;
  
  Can someone tell why and what privileges and subsidies have flexibility to the user non-apps while it can change the password using fnd_web_sec.change_password.
  
  
  
  Concerning

  the information above does not solve my problem, I get the message

  Because you do not have permission on all objects that are referenced by the API (see below).

  Select FND_WEB_SEC. CHANGE_PASSWORD ('MARSHAD', 'mohammad @123') "RES" of the double

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 25

  ORA-06512: at the 'APPS '. FND_CORE_LOG', line 432

  ORA-06512: at the 'APPS '. FND_PROFILE', line 110

  ORA-06512: at the 'APPS '. FND_SSO_MANAGER", line 227

  ORA-06512: at the 'APPS '. FND_WEB_SEC', line 1425

  ORA-06512: at line 1...

  can you please list me what are the grants and other Jules Destrooper I should give to a user so that he can change password.

  I don't have the list of objects and you should get yourself by consulting the site code and eTRM API.

  by changing the DDT in the user non-apps after the grant, will, it may be able to change the password.please tell this syntax is correct or not.
  Select applications. FND_WEB_SEC. CHANGE_PASSWORD ('user', 'pwd') "RES" of the double

  What is the point of using 'FND_WEB_SEC. CHANGE_PASSWORD' and not FNDCPASS or FND_USER_PKG API?

  Thank you
  Hussein

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.