How to send the first video again through dynamic links

Similar Questions

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• How to activate the S-video port on a satellite M30X 154?

  Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?

  If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.

  When I connect the cable to the laptop, nothing happens!
  Help

  Hello

  Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.

  But on mine, I have a NVidia Control Panel, where I can configure dualview,
  normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).

  When a TV is plugged and not recognized, I can apply recognition there.
  Relative to the opening of the Panel, the TV is also available.

  Maybe I could help you.
  If this isn't the case, note that the settings of windows your TV is not available.
  Try to go to the User Interface of your graphics card...

  Matz

• How to send the request to set the id as a parameter in the second competitor program that uses the host program.

  Hello

  I created a set request of 2 concurrent programs. And when I start the game of demand, I need to spend the game id ask competitor second program as parameter. I tried adding the parameter to the second concurrent program using the sql statement and the query such as "select fnd_global.conc_priority_request from" dual But when I submit the application together, by the way-1 as a default setting.

  Can one please let me know how can I move the set request id as parameter to the second program in my game application.

  Thank you.

  Hi my requirement is to send the first programs simultaneous logfile as an attachment in the email when the second program runs. Then for the second program I use a unix script. I used REQID = $4, which will be the ongoing execution of the programs require id and I'm this passage in the following sql query:

  SELECT SUBSTR (fr.logfile_name, INSTR (fr.logfile_name, "/",-1) + 1) filename

  OF LIF, fnd_concurrent_requests en fnd_conc_req_summary_v

  WHERE frv.request_id = fr.request_id

  AND frv.program_short_name LIKE '... »

  AND frv.priority_request_id in (select priority_request_id from fnd_conc_req_summary_v

  where request_id = $REQID);

  This query will be the name of the log file and using the unix command I send you emails.

  Thank you.

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Satellite Pro M50 with Vista: how to get the S-video on the job?

  Hi all

  I have a vista equipped Satellite Pro M50. Does anyone know how to get the S-video on the job? I can't understand.

  Inadvance, see you soon

  Phil

  Did you look in the user manual?
  This doc is always pre-installed on laptop and provides useful information. Also how to connect a TV and use simple notebooks ports.

  A hint; You must use an s-video cable to connect the laptop to the TV.
  Then use the FN + F5 key combination to switch between display devices.
  Sometimes the special s-video option must be enabled on the TV.

  I would recommend consulting the manual of the TV also.

  Good bye

• How to disable the opening video on Microsoft Combat Flight Simulator3

  Can someone tell me how to disable the opening video on Microsoft Combat Flight Simulator3?

  Thanks, BossDweebe. I just realized that all I have to do at the start of the opening video is to press the esc key and it takes directly to the game options.

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• Columns of folder: by default, how can return the first column 'Name' without having to move it manually every time?

  Something's happened awhile and when I create a folder which appears the first column is the column 'Date modified '. By default, how can return the first column 'Name' without having to move it manually every time?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_4

  http://Windows.Microsoft.com/en-us/Windows-Vista/folders-frequently-asked-questions

  It will be useful.

• How to set the first character as selections in the EditField.

  Hi friends,

  I am a third-party application that I have to set the first character as capital.

  so please help me how to set the first tank as capital.

  Take a look at AutoTextEditField - maybe you can use this to do it automatically...

• How to send the Web page or an e-mail link

  I have a Surface Pro and can't find how to send a page or an e-mail link that I can in any browser.

  @Robert alt + F should open the file menu if IE is enlarged, with windows, Menu bar is active or not.

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• How to find the first Sunday and the second Saturday of each month

  Hi all

  How to find the first Sunday and the second Saturday of each month

  Thank you

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  994122 wrote:

  Hello

  I need to pass the months parameter how to do this? like Jan, Feb etc... (one of those)

  Do you have a procedure?

  Should you output only for the months you passed in the parameter?

  The easiest way is to set the parameter as date. When you go such as p_date as DATE ' 2014-10-01', then you can

  PROCEDURE two_dates)

  p_date IN DATE

  p_first_sunday DATE

  p_second_saturday DATE

  )

  IS

  BEGIN

  p_first_sunday: = NEXT_DAY (TRUNC (p_date, 'MM') - 1, TO_CHAR (DATE ' 2014-10-12', 'DAY'));

  p_second_saturday: = NEXT_DAY (TRUNC (p_date, 'MM') - 1, TO_CHAR (DATE ' 2014-10-11', 'DAY')) + 7;

  END two_dates;

  Or you describe what you need.

• How to send the email from the content server?

  How to send the email from the content server? Is this enough to configure the SMTP server with the content server oracle? I want to send a mail generated both system admin system and author of the content when a content is expired. Please suggest how to enable e-mail functionality. Please suggest how the mail will be sent both SYSADMIN and author.

  Thank you

  In particular, this can be achieved by configuring - see EnableExpirationNotifier

• How to send the student card to activate my acrobat from Adobe pro ED program?

  How to send the student card to activate my acrobat from Adobe pro ED program? It is uncomfortable!

  Redemption Code https://creative.adobe.com/educard

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• If I want to change something in my videos, should I make the entire video again?

  If I want to change something in my videos, should I make the entire video again?

  Hello

  Yes, when you change something on a video, then you must make one more time because the change is applied to the entire clip.

  If you have several clips on a timeline and and you make changes on a particular item, then just re - make this clip, all other elements will not be changed.

  Kind regards

  Navdeep Pandey