How to separate the data from the reports

Similar Questions

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox

  How can I get data from each associated XMLnode in movieclips separated when you click a line in the combobox?

  A sample of XML is like this:

  <>planter

  < Lauvtre >

  < Botanisk_navn > Acer campestre < / Botanisk_navn >

  < Norsk_navn > Naverlonn < / Norsk_navn >

  Gronn < Farge > < / fan >

  H4 < Herdighet > < / Herdighet >

  < Hoyde > 10-15 m < / Hoyde >

  < / Lauvtre >

  I have a combobox where it shows the botanical name and the Norwegian name. But the rest of the info in movieclips seem separate.

  Someone has an idea how to do this? Can I use the trace function maybe? Here is my AS3 code so far:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void

  {

  your. Text = list.selectedItem.data;

  TB. Text = list.selectedItem.label;

  }

  var xml;

  function onLoaded(e:Event):void

  {

  XML = new XML (e.target.data);

  var it: XMLList = xml. Planter.Lauvtre;

  for (var i: uint = 0; i < il.length (); i ++)

  {

  list.addItem ({data: it.}) Farge.Text ([i]) + "\n"+ it.» Herdighet.Text ([i]) + "\n" + it. Hoyde.text ([i]),

  label: it. Botanisk_navn. Text() [i] + "\n"+ it.» Norsk_navn. Text() [i]});

  }

  }

  Loader.Load (new URLRequest ("lauvtre.xml"));

  Thank you!

  Rheus.

  I don't know what you're trying to do.  but, if you want to fill one combobox with the botanical names and when one is chosen, the other use of logins:

  var loader: URLLoader = new URLLoader();

  loader.addEventListener (Event.COMPLETE, onLoaded);

  list.addEventListener (Event.CHANGE, itemChange);

  function itemChange(e:Event):void {}

  var selectedObj:Object = a [list.selectedIndex]

  trace (selectedObj ['fan'], selectedObj ['Botanisk'], etc);

  }

  var xml;

  var a: Array = [];

  function onLoaded(e:Event):void {}

  XML = new XML (e.target.data);

  var it: XMLList = xml. Lauvtre;

  for (var i: uint = 0; i

  list.addItem({label:il[i].child('Botanisk_navn').toString()});)

  a [i] = {'Fan': it [i].child('Farge').toString (), 'Herdighet': it [i].child('Herdighet').toString (), "Hoyde": he [i].child('Hoyde').toString (), 'Botanisk':il[i].child('Botanisk_navn').toString(),'Norsk_navn':il[i].child('Norsk_navn').toString()};}

  }

  }

  Loader.Load (new URLRequest ("test.xml"));

• How to generate the report on rules

  How to generate the report on rules with id recipient and with a few keyoword in a rule.

  The rule management dashboard has an integrated 'report rules', you can configure properties and input parameters.

  For rule management dashboard, click homes > Administration > rules. In the upper right, next to the date and time, click reports.

  You can also find these helpful videos: http://edocs.quest.com/foglight/5610/Foglight_Reports_videos.php

  Hope this helps,

  Shay

• How to create the report of this style?

  Hello
  
  I have a problem when creat a report using obiee, this is a monthly report, the layout like calendar,.
  
  There is a quick baseed on the month, if I choose 201109, the report will be poster of daily sales and the number of customers in September.
  
  Every day have the sale and every day must be listed, first line display name of 7 days, second row shows sales and number of customer information,
  
  third row display name of 7 days, and all the following steps.
  
  1 sep | 2 sep | 3 sep | 4 sep | 5 sep | 6 sep | 7 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  8 sep | 9 sep | 10 sep | 11 sep | 12 sep | 13 sep | 14 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  15 sep | 16 sep | 17 sep | 18 sep | 19 sep | 20 sep | 21 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  22 sep | 23 sep | 24 sep | 25 sep | 26 sep | 27 sep | 28 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  29 sep | 30 sep
  Sales: sales 10: 10
  No: 10 no: 10
  
  Thank you! waiting for your response.

  So you're a user same as below:
  How to view the report by using the style of calendar in obiee

  Follow my instructions. Also, give a look at this http://bischool.wordpress.com/2010/10/22/calendar-view-in-obiee-and-applications/

  You can have dates instead of the name of the day, but you must ensure that your definition is very clear in your time dimension i.e. each week week 7 days. You table looks like his week to jump and you have each month as 30.31 or 28 days...

  Come and play and you're done... hope its helpful

• How to view the report by using the style of calendar in obiee

  Hello
  Can someone tell me how to view the report as the calendar?
  When I choose chrystelle, it displays 31 days. 7 column, from Sunday to Saturday, and each cell displays the detailed information, such as sales from today!
  Thank you!

  Hello

  Please foloww the below blog...

  http://bischool.WordPress.com/2010/10/22/calendar-view-in-OBIEE-and-applications/

  Thank you
  Vincent

• I transferred all my info to my new 6 s.  How to clear all data from old 4S?

  I transferred all my info to my new 6 s.  How to clear all data from old 4S?

  Follow the contours of the steps in this Apple Support page:

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• How do I export data from one day to backup disk.

  Hi all
  
  Here we have a requirement like, we need to download the data from one day to the external drive and we must compire the exported data and the data in the table.
  I googled and I have discovered that using expdp command we can export the table content, but my Question is how do I export data from one day. My table having 2 years of data and I need download the data of only one day.
  
  expdp scott/tiger@db10g tables = EMP, DEPT = TEST_DIR dumpfile = EMP_DEPT.dmp expdpEMP_DEPT.log = logfile directory
  
  Can someone tell me how to download data from one day to the table & compare data exported with the data in the table. (I know both exported and data of the table data will be the same that we are downloading data of the actual table, but for tests, I need to know how to compare).
  
  
  Thank you
  Sree

  However, I do not understand the scenario but here is a way to compare:
  (1) change the name of the table newly created in another name
  (2) import the exported file once again

  you will have the same data in both tables

• How we can encapsulate data from the report

  Hello
  I use shape with report
  
  in the report, there are five columns
  
  first name
  family name
  address
  student card
  class
  
  address is too long, how can I wrap this up so that the report attractive
  
  
  Thank you
  Nisha

  Change your column and type the following line in the css of the column style:

  Display: block; width: 200px; overflow: hidden

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• How to plan the report filtered by dynamic date based on the date, the Agent is running

  Hello

  I have a question about account using OBIEE agent.

  If I run an agent today to deliver A report, can I me A report based on the date of last Monday or any dynamic dates?

  For example, say is today, December 18, 2013, and my agent is run according to how I put the calendar. Now the content of the delivery report one being delivered. Now A report has a date column, normally this column is filtered by the current date. But if it comes through the agents to different users, the data should be the previous Monday, so in this case, 9 December 2013. When this agent is run once again, declared December 27, 2013, then the report must be filtered by December 16, 2013, which is the previous Monday 27 dec.

  Something like this is possible in OBIEE 11 G?

  Thanks in advance.

  Yala,

  Not in a straightforward way

  (1) let the report through Agent with filter current Date

  (2) after he ran for the first time you can see IBOT name/last execution time (LAST_RUNTIME_TS) in S_NQ_JOB

  Create a variable reference 'last_run_agent' to aid in sql to get max (LAST_RUNTIME_TS)

  SELECT max (LAST_RUNTIME_TS) from s_nq_job, whose name = "AGENT_NAME;

  Change analysis with current date filter report and amend accordingly the condition of filter to filter on repository variable, newly created

  Thank you

  Angelique

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

• How to convert string data from the serial port to double?

  Hello!

  I am very new in LabView and attempt to read data from an OHAUS pioneer pa-313 electronic scale via RS232 serial port. I use the VISA. I can read the data and see it as a string to the screen, but when I try to convert it to a double, it is just the integer and decimal numbers have disappeared. Here's the question: what can be the problem? How can I get the decimals as well?

  What is your normal decimal point?. or?

• How to paste some data from numbers to some placeholders in the Pages using AppleScript and Automator?

  ​

  Hello AppleScript and Automator Pros!

  Unique ID	Elements	Quantity	Unit of measure	Sum, $	Color	Dark?
  1	Pencil	1	Agenda	90.50	P	Yes
  2	Pen	150	Agenda	300.23	THERE	NO.
  3	Pillow	2	Agenda	400.01	B	NO.
  4	Toy	114	Agenda	500.30	R	Yes
  5	Repair service	N/A	N/A	1.00	N/A	NO.
  6	Phone	98	Agenda	1986.10	W	NO.
  P = purple Y = yellow B = black R = red W = white

  It was an example of Document numbers

  
  

  Now the example of Document Pages

  [PH for Unique ID] - Ben got: [PH for element], [PH for quantity] [PH for unit of measure], [dark or not PH] [PH for color] for [PH for sum before the comma] $ [PH cents] c.

  When Ben had [PH for quantity] [dark or not PH] [PH for Color] [PH for item tiny first character and changeable if necessary end], he became happy

  Example 1: Allows you to take data from line with Unique ID 1 and that's what it takes to go:

  1 - Ben got: pencil, 1 point, violet dark 50 ° c for $ 90.

  When Ben had 1 Purple Pencil dark, he became happy

  Example 2: Now data row with Unique ID 3 and it is what to get:

  3 - Ben got: Pillow, 2 pieces, blue for $ 400 01b

  When Ben had 2 blue pillows he became happy

  Example 3: Now the data used to row with Unique ID 5 and this is what it takes to get:

  5 - Ben got: repair service, 1 service, for 1$ 00 c complete

  When Ben had 1 repair service complete, he became happy

  Here, I have to change given n/d of the table in numbers and replace quantity with 1 PH, PH for unit of measure with service (no point as in the previous examples) and the PH for color with plenty of example.

• How to separate the images from the rest the scroll boxes?

  Greetings! I need to separate the boes of scrolling images in the left side and right side. I thought I had the right code here but images that say 'Hiring' and 'domain sales"still being contained in the boes of scrolling when I want them to be outside and above them. I also want to be aligned with the image that says "best Marketing names. Can anyone help?

  Here is a link... www.bestmarketingnames.com/banneredit.php

  CSS:

  aside. Left, {aside.right}

  Background: #FFF;

  height: 290px; / * adjust the height and the width as Req'd * /.

  Width: 220px;

  overflow: scroll;

  }

  . Scroll {}

  height: 290px; / * adjust the height and the width as Req'd * /.

  overflow: scroll;

  }

  Nancy O.