How to set media keys with WinAmp on Satellite P100-387

Similar Questions

• How to set the key numb to activate at startup

  How to set the key numb to activate at startup on computer laptop gateway running windows 7?

  Original title: numb locking button

  Hello Wan,

  Thanks for the quick response. We appreciate your time and your efforts.

  By default the NUM LOCK status is the same as it was before you shut down the computer properly. If it is on when you shut it down it will be on when you turn on the computer again.

  A few users have solved this problem by disabling fast boot option in the BIOS (Basic Input Output System). I would ask disable youFast Boot to the BIOS and check if that helps.

  For more information about how to disable Fast Boot in the BIOS, I would ask you to contact the manufacturer of the system.

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope the helps of information provided. Let us know the results and do not hesitate to post on the Microsoft Community, in case you have problems when you are working on Windows.

• Satellite P100-387: how reintall Windows XP Media Center Edition

  Hello

  I work with P100-387. Today, I realized, that there is a problem with the new upgrades for windows and update for Office 2007. I'm not able to open Word. Excel is workin, Power Point also. Opening remarks, the remains of screen splash long (about 3-4 minutes), the menu is being loaded, but when I try to click on something... does not.
  I tried to delete some KB, but nothing helped. I have downloade also all the updates for Office 2007 - still does not.

  If the last option is to reinstall Windows. Please tell me how to do?

  I tried using the recovery disk, but I scare: there is that my HARD drive will be formatted in a single partition of message (for the time being, I have 4, and I want to do all the time with all the data). My goal is to format only C: (the system) and install the fresh news or Windows XP MCE.

  Please give a solution, how to solve this problem.

  Best regards
  Szymon
  [email protected]

  > I tried using the recovery disk, but I scare: there is that my HARD drive will be formatted in a single partition of message

  Well generally it of true the recovery CD would be to format the whole HARD drive and erase all partitions and set the laptop to factory settings.

  But the question is; what recovery CD Toshiba do you have? I presume that it is the new version of the recovery CD because the laptop Satellite P100-387 is not very old.

  You can choose between the Standard recovery mode and Expert mode?
  Using the expert mode you should be able to choose the partition where the operating system would be installed.

  But if it is not able to choose between these two recovery modes, then I guess you have the new recovery called RECO CD and there is no other choice than to format the whole HARD drive. In this case, the backup of the data would be desirable

  Of course, you can use the original CD of Microsoft. Using this CD, you will be able to install the OS on the single partition without format the whole HARD disk.

  Best regards

• How to set up Subversion with Jdevloper 11.1.1.3.0?

  Hello...
  I am currently using oracle Jdeveloper 11.1.1.3.0 and I want to use Subversion, but I do not know how to set up with Jedeveloper? What version did? How to create the repository? How to import source code repository? I'm new on this. If no document, site for the steps
  pls...
  
  Edited by: User555 11 May 2010 21:23

  (a) required SVN version: it is easy through the SVNKit version in JDev. You can determine your version of SVNKit via Tools-> preferences-> Versioning. Visit http://svnkit.com/ for what SVN version is supported.

  (b) create the SVN repository: this can be done in JDev or externally with other SVN tool. Internal JDev through Versioning-> create the Local repository

  (c) import Source Code: open existing application in JDev, then select Versioning-> Version Application.

  (d) documentation: the manual supplied with JDev called 'developing in teams' has documentation SVN for JDev.

  CM.

• How to set up channels with Spring-Flex?

  Newbie here to try and get my first Flex/BlazeDS operational application.   I think that I have correctly configured my servet and Remoting destinations using Spring-Flex integration.  My only remaining questions are how to set channels.

  The use of the spring/BlazeDS integration means that I don't have to have a remoting-config file. XML more.  But it the documentation is not clear as to if I have to configure my channels in a services - config.xml still file.

  If I need a services-config file. XML (and I think I do), how can we get away without hard coding the server URL?  I've seen samples on the web such as:

  "URL ="""https://\{server.name\}:\{server.port\}/flex2gateway/cfamfsecure '

  
  But I did not when/where/what the dynamic substitution?  They look almost like Maven properties or the spring, but they may not be.  It's just something that needs to be changed manually after the installation?

  Finally, I don't really like the idea of compiling the Flex client against a configuration file on the server side as I saw suggested on the web.  How would we have the Flex client discover - or if not to understand what he must do it dynamically?

  Sorry for the post multi-question... Thanks for any help!

  Do not configure a set of channels, but you can do it in your Flex client rather than code in the file services - config.Xml. Here is some information on some ways to do this:

  http://help.Adobe.com/en_US/LiveCycleDataServicesES/3.1/developing/WSc3ff6d0ea77859461172e 0811f00f6e876 - 7fecUpdate.html #WSc3ff6d0ea77859461172e0811f00f6e876-7fdbUpdate

  Look at the section called "channel on the client Configuration.

  Regarding the tokens in the definitions of channels in services - config.xml:

  {server.name} and {server.port} resolved when running on the server and port used to load the SWF file.

• System recovery media is not delivered with my new Satellite P100

  Hello world.

  Two weeks ago, I bought my first laptop of Toshiba (P100-324). Before, I had many doubts about the facilities of Toshiba. Now I have to say that I am really very pleased with the quality of your product. The laptop itself is great and everything works fine.

  Except a problem: in the box, it there was only one disc: the CD entitled "Express Media Player Recovery CD. When I checked the database online of the Toshiba with my s/n, she showed a Windows recovery DVD in the package list. So I did what you guys recommend to: contacted * all * the FSA in Poland. Surprisingly, the quality of the customer service was not so good. Each of them told me as if there were no real DVD in the box, it MUST be a hidden partition on my HARD drive, and if I want to buy the CD/DVD with the operating system (I have a license/sticker OEM to use: XP MCE) I pay about 20 EUR

  Wow. A price of 20 EUROS for a single value of CD... 5 cents? (the media itself, not the software) In fact, when I was paying a lot of money for my laptop I expect something more in terms of customer service. But anyway, I'm just one customer, probably worth less than nothing to the FSA. So, after this long and boring, prologue here are my questions:

  (1) should there be another DVD in my Inbox that contains the Windows XP MCE OEM installation?

  (2) otherwise - y at - it technique uber-elite that Toshiba is using to hide the Windows recovery partition me? There are only 2 partitions on my HARD drive: one with 250 MB (which is IMHO far too small to contain all the windows + drivers) and one that fills the disk completely (~ 200 GB). Is there some magic bios that would display the partitions one another?

  (3) otherwise - is it possible to "produce" somehow a windows recovery DVD? I mean, on my c: drive is CMPNENTS, I386, directories VALUEADD I somehow recognizes Windows installation CD. However, when I try to use nLite on the root of c: (or the i386 directory), it indicates that not all the installation files are present.

  (4) and finally - how do I reinstall my Windows XP MCE?

  I really, really need to have an option to reinstall my operating system. It would be a shame for Toshiba that I had to buy another copy of Windows XP Home edition oem (and scratch the key oem sticker).

  Hello Tomasz

  First of all, I am very pleased to hear that you are satisfied with your new P100. Right now I use the older Satellite M70 with ATI graphics card, but I think buying Satellite P100. Satellite P100 has long been on the market and I hope that very soon, Toshiba P100 successor. Maybe something like P200 and I think I'll wait a few months see what happens in the future.

  Back to your question:
  As far as I know recovery DVD should be bundled with the new and original packaged product. On your laptop, it is also preinstalled Express Media Player. It's a small application based on Linux that allows you to watch DVD movies or listen to audio CDs without booting the operating system. It is preinstalled on small partition unallocated. Express Media Player using supplied restore CD you can install it anywhere, anytime. As I said recovery DVD should be supplied with your laptop. But in this whole one thing confused me: autour Googling, I discovered that the Satellite P100-324 is available in Germany and Austria. Because of this I really don't know how you could buy this product in Poland? Have you branch new or perhaps as some showroom products.
  Please give some info about it.

  Maybe is my view too long but I wanted to just tell you one thing. May be pretty important thing: many users mix of Toshiba service and authorized partners. Each authorized service partner is not directly Toshiba. All these partners are independent companies that have contracts with Toshiba (and very often with other laptop manufacturers) and they repair laptops. Please note that they operate as independent businesses and create prices on its own (free market). If there is a communication problem you cannot say: bad or bad service from Toshiba. Yes, in a certain way, they represent Toshiba but if personal service is not qualified or hostile he really has nothing to do with Toshiba himself.

  They are also right on self-created recovery DVD Toshiba a few notebook models are supplied without the recovery DVDs and the user must create one. But it is absolutely not the case with your P100. For most computers business notebooks have this option as Portege and Tecra.

  Dear Tomasz at the end it is not easy to say what you need to do. If you have a portable German perhaps it is best to order the DVD of recovery on your tongue. He's still irritated when you have additional costs but 20 euros is not a lot of money. Fill in your new toy and enjoy your life.

  Bye and good luck!

• How can I reinstall the cd/dvd player - Satellite P100 PSPAD

  Hello

  I have the Satellite P100 (PSPAD) and my cd/dvd drive (I do not know how or when) suddenly disappeard, it does not appear in my computer or Device Manager.
  I tried this but coul not found the lowerfilters so I delite the upperfilter and restart the computer, but it does not work.
  So I can reinstall it somehow and how can I do?

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2.
  You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values.
  To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.

  And what operating system are you using?

• Problems with graphics on Satellite P100-470

  Hi all

  Well... I had a little problem with my graphics card. Nvidia Go7600 has 'breaks' during the games, and I don't know what I have to do!

  I already turn off the firewall and all that! Can you tell me which driver can solve this problem!

  Thank you

  PS: Sorry for my English of wannabe! = P

  I found this article interesting in Toshiba basic knowledge:

  + The video image
  Some games display may seem "stutter" (image slows
  or stops intermittently) after that the game worked for awhile.
  under Windows Vista. The image of the video game seems in good condition when the game
  is started, but starts to 'stutter' after a while and continues
  to do so. +

  + Resolution +.

  + Update
  BIOS and display driver from the computer according to the instructions below. There
  need to update the BIOS first, then the display driver. +

  + Process +.

  * + * Update the BIOS of the computer to the version 4.20 or newer: * +.
  BQ + 1. Download [BIOS version 4.20: javascript: openSubDoc(1903197,'DL')] for Satellite P100. Save the file to the Windows desktop. + \\ + 2. Double-click the file on the Windows desktop to start driver installation. + \\ + 3. Restart the computer. +
  * + * Update the computer to version 7.15.11.5666 or newer nVidia display driver: * +.
  BQ + 1. Download [nVidia display driver version 7.15.11.5666: javascript: openSubDoc(1926096,'DL')]. Save the file to the Windows desktop. + \\ + 2. Double-click the file on the Windows desktop to start driver installation. + \\ + 3. Restart the computer. +
  + Games should now be displayed correctly (without 'stuttering'). +

  To find the drivers for your machine it just go to the main site of Toshiba computers and click on Support & downloads-> home page Support-> drivers download "Download."

  Basic hope solve your problem...

  See you soon

• How to set the keys to line declared with a model of ChildPropertyTreeModel

  I want to initialize my tree with a few nodes already developed. From what I read I have to use the setDisclosedRowKeys method, but I don't know how to create and fill the parameter RowKeySet.

  I was thinking something like this:

  RowKeySet rowKeys = tree.getDisclosedRowKeys ();

  = (ArrayList) model.getWrappedData () ArrayList object.

  TreeItem data = (TreeItem) object.get (0);

  List of children < TreeItem > = data.getChildren ();

  for (TreeItem element: children) {}

  Code to add this element to the RowKetSet

  }

  tree.setDisclosedRowKeys (rowKeys);

  There is a RowKeySet.add () method, but it refers to the current line, and in my case, there is no "current line" concept. Any idea on how to fill the RowKeySet?

  JDev 11.1.1.6.0

  My working solution:

  @Override

  public void expandDefaultNodes() {}

  FacesContext context = FacesContext.getCurrentInstance ();

  RichTree tree = (RichTree) context.getApplication () .evaluateExpressionGet (context, "#{components.tree}",)

  RichTree.class);

  ArrayList<>> newKeys = new ArrayList<>> ();

  RowKeySet disclosedKeys = tree.getDisclosedRowKeys ();

  Object oldkey = tree.getRowKey ();

  tree.setRowKey (null);

  TreeModel treeModel = tree.getValue ((ChildPropertyTreeModel));

  RKS RowKeySet = new RowKeySetTreeImpl();

  rks.setCollectionModel (treeModel);

  rks.addAll ();

  for (k subject: rks) {}

  ArrayList = k (ArrayList) keyAsList;

  First layer

  If (keyAsList.size () == 1) {}

  newKeys.add (keyAsList);

  }

  treeModel.setRowKey (k);

  TreeItem ti = treeModel.getRowData () (TreeItem);

  If (ti.isSelected ()) {}

  for (int i = 1; i)< keyaslist.size();="" i++)="">

  Subkey is used to disclose the parents of the current

  node

  Subkey list = keyAsList.subList (0, i);

  If (! newKeys.contains (subKey)) {}

  newKeys.add (subKey);

  }

  }

  newKeys.add (keyAsList);

  }

  }

  tree.setRowKey (oldkey);

  disclosedKeys.addAll (newKeys);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (tree.getParent ());

  }

• When I use my media keys (IntelliType), Winamp and other nearby

  I have the MS Wireless Desktop 3000 and 8.2 IntelliType. When Winamp is not my main target and I use the multimedia keys, MiniLyrics or Winamp will close. It was not always so; When I first installed this keyboard, it worked perfectly. Also, I tried to reinstall IntelliType and it does not solve the problem. Any ideas? Thanks in advance.

   

  Hello

  You did changes to the computer before the show?

  Note: It seems to be a problem with the macros on the keyboard software. Make sure that there are no macros / parameters assigned to any key under the software.

  Method 1:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 2: Restore the system to a date when it was working fine. Follow the link below:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• How to set a default with 2 tuners tuner installed?

  I just installed a WinTV-HVR Hybrid TV Stick, 950Q model. It works better than my tuner internal 3 year but looks like he only uses that the 950Q when the internal tuner is busy recording another program. How can I tell WMC using the 950Q as a default tuner and use only inside the 950Q is busy? Thank you!

  Hi, JJ.

  Unfortunately, as far as I know, he has no "Media Center A - Z guide" (at least, no not that I found yet.)  More from broadcasting in various places on the web.  But all of the info is out there (in various locations).
  Anything you can't find, feel free to ask.  A very good place for you to gothegreenbutton.com - this is a dedicated Media Center community.  A lot of help will be required here.

  Another good source of information is http://www.hack7mc.com/ .

  A few things to help you to started (or, better informed?):
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Center (but you already seem to have the basics down...)
  http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center (this does not cover some of the advanced options, not just the absolute basics.)
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Center-keyboard-shortcuts (very useful, especially if you do not have a remote control).

  For information about the edition of mass sources: you can't do (of, not natively).  However, there is a third-party (Guide Tool) application that can do this for you (among others).

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to set the key F2 to convert to profile OSX 10.7

  Can someone me idea how to put my F2 key to edit > convert to profile (instead of the brightness of my screen)?

  I used to be able to do fairly easily before 10.7, but now I can't understand it.

  Photoshop: Modify keyboard shortcuts > convert to profile does not accept my F2 key (it lights up my brightness)

  System Preferences > keyboard > shortcuts is probably the key, but deselecting F2 does not solve the problem

  PS13.0.1

  The default value for OS X 10.6 (and therefore 10.7, I presume) is to apply the 'feature' printed on a Fn key when the Fn keypress is not accompanied by the key 'FN' written on it which is located above the "Del" key

  You will be able to change this behavior in the system preferences > keyboard so that the Fn keys behave like keys Fn normal without a simultaneous pressure on the "fn" key and the "fn" key will be necessary for the "features".

  Here is a screenshot of the setting you need to reverse by default.

  

• How to set the alias with Essbase Studio?

  I read through P113-P118 "Oracle Essbase Studio user's Guide" on how to implement aliases. It seems easy t create the Alias defined according to the document.
  I want to put 100-10 aliases as "Cola", the information comes from the RDBMS to confirm. The product in RLDB a field SKU and SKU_Alias columns table, the Reference value is: 100-10 100 - 20, etc.
  My link is:
  Source: SKU
  link: TBC::TBC. Product.SKU_ALIAS
  It's using the grammar to page 115
  connection:
  ------' < logical_source_name': ' < physical_data_source_name >. < physical_tabl
  e_name > '. ' < physical_column_name > '
  
  But after that I deployed the cube, I do not see the product as expected from EAS alias name? I tried 100 times, but can't find what's wrong with me. Please advise, thank you!
  My question: how to put the elements in place or associate the alias set produces Essbase Studio so that I see of EAS? Thank you! Bob
  
  Published by: user2571802 on January 10, 2010 21:38

  First of all, it can be useful convert IST TBC in the Studio model, for this you will need to configure EIS and create the example application to confirm.
  Once it has been created in Studio, you can go to tools > migration catalogue IST and migrate the TBC of IST at the Studio application.
  If you use this method, all the aliases etc will be already set up to see how it's done.

  To set up the alias, you would go to
  Tools > "Alias set Manager" > create a new alias say "Default" and add a link, for example PRODUCTDIM. SKU to PRODUCTDIM. SKUALIAS

  Then on your right click "Properties Essbase" model > Alias tab > select the default alias table and move the window selected tables.
  This should then assigned the default table, if you check the properties to say PRODUCTDIM. SKU in the default alias tab and the mapping must be indicated.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to set up thunderbird with IMAP accounts and using an Inbox, and send

  I just installed Mozilla that I need to set up multiple e-mail accounts using IMAP. I need to read all the emails and to refer to the 'old' sent when using my Ipad. I implemented 4 profiles and they each have their inbox, outbox, etc removed child. It's embarrassing for me because I need to have a global inbox, Outbox, sent and deleted items. Essentially a place where all the emails of all accounts are kept. I tried to unified value but then find that emails go inside or outside are not synchronized with my other devices.

  I hope the above makes sense and the air of someone who can point me in the right direction.

  Thank you

  Mark

  With IMAP, the email client shows you what is on the server. If you put something in a folder in Thunderbird, it this copy on the server. So, in principle, a shared common inbox is not possible. Messages from accounts B and C would be copied to account A, and vice versa.

  We can close a common Inbox. The integrated solution is to use unified folders which creates virtual folders.

  View | Records | Unified

  So you will have a folder Inbox, composite and Ditto for files common to all accounts: sent, drafts, and trash/Bin/deleted. It fails where you have unique records in one or more accounts, because he doesn't know what else to blend with.

  I prefer an approach do it yourself which is pretty much the same technology; This is a Saved Search folder, where you create your own folder that combines the contents of other files. So, not only can you have a common inbox, but also a folder all unread messages, or messages involving specific correspondents, or related to a specific project or interest, through a series of accounts.

  https://support.Mozilla.org/en-us/KB/using-saved-searches

• How to set up WRT160N with my ZTE 831 D

  Hello!

  I'm really very bad at networking. So I bought a WRT160N cause it was LELA. I though that he will do the things of routing and others by himself. When the installation CD was runnning the router and medem has worked well. the configuration of the installation CD was full internet has stopped working. LELA shows the problem with my ZTE modem although seeing DSL on my modem is solid stable. can someone help me on how to configure all the parameters with the ZTE modem so I completely reset time on them and do the configuration manually?

  See this