How to set sku point

Similar Questions

• How to set anchor points for objects that have appiled effects scroll?

  I design a one page website with several sections. Each section is scrolled upward at different speeds. Each section also has the key frame different starting points. Most of the sections overlap in fact when in Design view. None of the sections scroll left or right... just straight up.

  How do I set anchor points so that when displaying in the top browser of each section is at the top of the browser window?

  Answered my own question...

  I made my own rule using the tool box and simply marked the length of pixel in design mode, I then saw in the browser and worked on how far down the page that I had scrolled gave me an exact figure to set the anchor point.

• How to set this point as well COSTS in Oracle Asset R12.1.3

  Hello
  
  I created po and invoice with the assets of the clearing account or CIP Clearing and I transferred to the assets of the oracle. Prepare more mass, how can I set this as well COSTS. I already have active cost in the asset class.
  
  You need help!
  
  Thank you

  Hello

  If the query is "assets of Oracle can allow conversion of an asset Capital/CIP to a credit to expense at the stage of adding mass?"

  The answer looks like no.... I did a below test case myself to see the results.
  (1) created invoice to pay with the active account temporary, valid, approved, represents the invoice...
  (2) transferred to GL and linked the process of creating massive addition of accounts payable
  (3) asset, went to the screen adding mass to prepare...
  (4) questioned a line of addition of mass with the NEW status
  (5) in assets Details TAB, the type of property for my line is uppercase. I tried to change that in Expensed, while I can't change because the active type of expense is not listed in the drop-down options menu... I choose PAC or type of assets of the group, but not charged to the exercise...

  I tried another approach, by selecting a category (cool) for my line of massive addition, it will allow to change the type of assets or not... rather it throwed the below error message...

  «APP-OFA-48201 error: error incorrect asset Type and category combination for & stuff»

  In seeking the support of oracle with the above error reference came across the note below...
  165827.1 ID = APP-OFA-48201 when changing the category to prepare mass additions

  who says:

  "FA only allows assets reclassified between capitalized categories or between categories has expensed. Assets may not be reclassified between categories past expensed and capitalized. "

  I'm assuming that the conclusion or you can change the type of assets of immobilized to Expensed to the massive addition step prepared... .you could either remove the line and assets (load) to create manually...

  Kind regards
  Ivruksha

• How to set anchor point?

  I know, repositionAnchorPoint (and many other scripts) - there is a good solution. But I need write myself.

  Like this?

  myLayer = app.project.activeItem.layer var (1);

  myLayer.property ("anchor Point").setValue([100,100]);

  Dan

• How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

  How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point? I am trying to connect a Samsung Galaxy stellar and receive an error page indicating that the DNS search failed. I do not know how to set up my computer, I have the wireless power and know how to connect to the hotspot from the phone. The phone is able to recognize the computer and its IP address, and the computer recognizes the phone and tries to connect but then displays the error message "DNS search failed.

  Any help would be great!
  Raquel

  Hi Raquel,.

  Do you have any security program installed on the computer?

  I suggest to go through the steps from the link provided and check if it helps.

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  You can also consult the manual of the computer for the same and check.

  If the problem persists, you can also contact manufacturing for known problems:

  Support.Toshiba.com

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this helps and let us know if you need more assistance.

• How can I set the pointer or mouse to do only the things when I double click?

  Original title: my highlites pointer without clicking, opening up much more often.  How can I set the pointer or mouse to do only the things when I double click?

  How can I configure my pointer/mouse to do only the things when I double click?  Currently, it has a mind of its own, putting highlight and things that I don't want to open.

  Hi George,.

  Try the following steps to disable the functionality of hover and check if it helps.
  a. Click Start and select Control Panel
  b. click on ease of access and select make the mouse easier to use
  c. If there is a check box for activate a window by hovering over it with the mouse uncheck it.

  You can also read the following article and check.

  Change the settings of the mouse

• How to set the color for background ChoiceBox point to ChoiceBox with css?

  How to set the color for background ChoiceBox point to ChoiceBox with css?

  I need to change the backgound color list items.

  I tried with the following code, but it's not help to:

  {.context-menu .choice-box

  -fx-background-color: Red;

  }

  .choice-box .menu-item {}

  -fx-background-color: red;

  }

  In Java 8, either of your selectors should work.

  In Java 7 (JavaFX 2.2), you need of the following workaround:

  #choice-box-menu-item {
       -fx-background-color: red ;
  }
  

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• How to set point by default in oneSelectChoice

  Hi guy. I have af:selectOneChoice with VO point.
  
  JSPX
  < af:selectOneChoice value = "#{.inputValue links ['Edit_RequestIdentityCardTypeId']}."
  Label = "#{.label links ['Edit_RequestIdentityCardTypeId']}."
  required = "true".
  Binding = "#{speedformula_EditRequest.selectOneChoiceDocType}" >
  < f: selectItems value = "#{.some links ['Edit_RequestIdentityCardTypeId']}."
  / >
  
  < / af:selectOneChoice >
  
  
  pageDef
  < list id = "Edit_RequestIdentityCardTypeId".
  IterBinding = "Edit_RequestIterator" StaticList = "false".
  ListOperMode = '0' ListIter = 'IdentityCardTypeIterator. '
  NullValueFlag = "1" NullValueId = "Edit_RequestIdentityCardTypeId_null" >
  < AttrNames >
  < point Value = "IdentityCardTypeId" / >
  < / AttrNames >
  < ListAttrNames >
  < point Value = "IdentityCardTypeId" / >
  < / ListAttrNames >
  < ListDisplayAttrNames >
  < point Value = "IctShortName" / >
  < / ListDisplayAttrNames >
  < / list >
  
  
  How to set default value oneSelectChoice?

  You can set the default value of the attribute in your VO. ensure that you give the default value is literal a valid value of your LOV. By this way, when it makes you see the default value set here to be selected.

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• How to set the storage space allocated to the restoration of the system to 200 MB?

  Could you tell me how to set the maximum storage limit to 200 MB?

  Whenever I have delete system restore points, my hard disk free space increases about 10%.  About a week or so later, it's back to where it was before I deleted the restore points.

  It is very important for me because I am sure that storage space is set too high.

  Hello

  See the "BOLD" marked links with more information to help.

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">