How to set the timeout for the INITIAL LOAD EXTRACTED?

Similar Questions

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• How to set the initial state to hide/show buttons on opening PDF files?

  InDesign offering a wonderful object multi-state capacity which unfortunately does not work in PDF files. It took a bit of research for me to come with this information, the UI program itself gives indications that this should work. (Why not maybe another forum of discussion.)

  So, I create an interactive PDF using buttons to hide/show specific paragraphs (which are also implemented as buttons because only the buttons and forms can be hidden or shown, AFAIK).

  I've set up a PDF created via InDesign using the six control keys and seven paragraphs - one of these paragraphs is the initial state that I want to see when the document is opened. As long as the PDF file that I create is distributed, that's how it works: an initial paragraph appears, buttons can be clicked and the stuff of Heroes appears the mark.

  However, a colleague thoughtfully saved the PDF file (so it could rename something more to his liking). When he does this, he left one of the displayed subsidiary paragraphs, rather than the initial paragraph I intended... and of course, this is the version that came out to the customer.

  Question: Is there a way to set the initial state to hide/show buttons when a PDF document is opened first, regardless of the State in which he could let or saved? I guess it's sort of ON OPEN event that would allow me to define an initial state as a safety net to the way I save the original document. Obviously, the PDF AS I DELIVER IT will pave the way, I want it, but I'm trying to overcome the appearance of the Murphy's law of a document that can be re-recorded in another State. An event which OPENED on that cure.

  Thank you.

  in this case you would have been better if you had locked the PDF file in order to prevent changes ANDS record as actions...

• How to set the initial directory

  Using the element "FileChooser' in JavaFX 2.0. How can you properly set the initial directory?
  
  In Swing, you follow these steps:
  

  JFileChooser Choose = new JFileChooser();
  Choose.setCurrentDirectory(new File("."));

  But in JavaFX:
  

  Choose.setInitialDirectory(new File("."));

  doesn't work and causes JavaFX to bomb out when this code is triggered.
  
  Published by: 863626 on October 30, 2011 05:30

  javafx.stage.FileChooser choose = newjavafx.stage.FileChooser();
   File d = new File(getClass().getResource(".").getFile());
  choose.setInitialDirectory(d);
  

• How to set the initial value for a single radiobutton in a group of Radio buttons

  Hi all
  
  I have a radiogroup with 3 buttons. The names of the RadioGroup are driven out of a XXVO.
  
  3 Radion buttons:
  
  + 9
  * XX
  * XXX
  
  When loading the Page I want to make an XXX option button to be the default, please suggest how.
  
  Note: The radiobutton values come from VO
  
  Thank you

  Hello

  XXCONTACT_ADDR_BUTTON1 - is the value of the radio button to select the right...

  Very well.. :))

  Concerning
  Meher Irk

• How to set the initial value of the same value as the Page loading of SelectOneMenu

  Hello
  
  I noticed that in my value = "#{bean.selectedItem page}" of selectonemenu is always null when loading the page and because of that there is a difference in the initial value and the value sent as valuechangelistener is shot because of this difference, I don't want to happen. "
  
  I call the method to load the values into selectonemenu in the constructor of my bean.
  
  How can I make sure that the initial value is always the same as the value at the time of page load so that valuechangelistener would not fire unless the user changes the options in selectonemenu. Because of this problem I am facing a lot of issues like valuechangelistener is going to get fired.
  
  Any help is much appreciated.
  
  Thank you

  Yes, you will need to find a way to set the value before the creation of the part of the view. Generally, there are two ways. There are at least two ways, I tend to use:

  (1) loading deferred; you would get a Get accessor like this method:

  public String getValue(){
    if(value == null){
      // code here to get value from wherever
    }
  
    return value;
  }
  

  (2) initialize properties in a method annotated with @PostConstruct in your backing bean

  @PostConstruct
  public void initialize(){
    value = whatever;
  }
  

  Hope that helps you. If this isn't the case, so I totally misunderstood you and you try to explain more clearly what your problem is.

• How to set the initial focus to the second field?

  Hello
  
  I created one for the user to enter data.
  The first field of the form has a default value.
  Therefore, when the screen is rendered, I would like to put the cursor in the second field for the user to enter data.
  
  How can I do this?
  
  Thank you
  
  Gabor

  Ahh and now for points...

  Set the display of Page attributes > focus cursor "do not carry the cursor".

  This allows your javascript to run.

  Gus...

  You can reward this answer by marking as being useful or correct ;-)

• How to set the initiator

  We have a process that uses the process creation activity to start another process. When that other process is created, it doesn't have the initiator as the user who created the parent company. It includes automatic Manager as the initiator. We want to set up a view that displays processes created by the reqeustor. I know that this can be done by using the condition where initiator = CurrentUser. In this case it will not work. Any ideas?

  Hello

  You will not be able to define the predefined variable creation, but you can create a project variable new string "initiator". If you choose the name of the participant that you create the instance, you will be able to create a view of this project variable.

  Hope this helps,
  Dan

• How to set the initial position of the window and the size of a CHM file to RoboHelp 2015

  Hello.

  I use RoboHelp 2015.  After posting my chm file, when I open the file that it is always placed in the upper left of the screen and is a bit too small.  Where in 2015 of RoboHelp can I go to change the attributes of size and position for the way the chm file is shown by pressing?

  Robert

  OK, try this one:

  Click here to see

  See you soon... Rick

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW