How to set up a wired LAN on a Wrt320n?

Similar Questions

• Need help setting up a wired LAN lan games

  I try to understand what I have to buy an easy to implement the cable LAN.  Specifily more I'm looking for a router, switch, or hub.  I will be putting this LAN up aboard a commercial ship so it must be wired (too much metal for an efficeint wireless signal) and I'll proably a 12 people who want access to connect to an Xbox 360 or PS3.  This LAN will never have access to the internet.  In the future there may be more people who would like a connection so I would have the possibility to connect two switches together (1 switch by the bridge of the ship).  but for now I'll just implement 1 Platinum that I have only one available output to power a switch/router/hub.

  Key factors

  1. you are looking for something small price

  2 you can connect at least 12 people

  3. simple and detroit before implementing.

  4 hold a model specific linksys product so I can read about the installation process.  That way if I need to assign IP addresses, I can make it in advance and make installation as soon as possible.

  You can opt for a router (8 ports) BEFSR81 or BEFSR41 (4 ports) followed by a network switch EZXS55W/EZXS88W/EZXS16W (08/05/16 PORTS). No need to put the IP address for the computers that you can use the DHCP from the router to the switch and the computers.

• How to set up a Lan to Lan VPN without using your external IP address?

  I have two 28 subnets A & B.

  My PIX and ASA outside interface addresses are both in A subnet.

  I am in the middle of a migration of the PIX to ASA and need to use the PIX outside of the address of the interface on the ASA for the last two remaining lan to lan VPN.

  I do like that because the sellers of these virtual private networks to connect to are huge dinosaurs IT and the aaages to get their sh * t tri... This means that I have to pass the IP address to my ASA, so I can't sentence have change for a new IP peer.

  I tried to figure out how to set a specific my counterpart VPN IP address but I can't figure out how...

  I even physically connected a second ethernet port and tried to give a similar IP in the same range, which it says it is not possible to have both outside the IP addresses on the same subnet.

  Hello

  It is not possible to have an IP address "secondary" on the physics/logic interface of a Cisco firewall.

  And as you've noticed, you cannot configure the same subnet on 2 different interface either.

  We are talking about such a large configuration that you want to just migrate from completely to the ASA PIX and make a switch during a maintenance window?

  Couldn't you just pass the ASAs 'outside' IP address address to that on the PIX and move the ASAs 'outside' of the PIX? Or not the ASAs "outside" IP address already some configured related to what makes this impossible?

  -Jouni

• Adding a switch to an existing wired LAN House

  I have a wired LAN House that needs to be expanded.  I have a Linksys BEFSR41 Cable/DSL router that is currently full.  I need to add more than 2 devices.  I recently bought a workgroup EZXS88W switch.  What I had thought to do running cable line from the router to the switch and everything else after you have connected to the switch.

  I know zip about how to set this up, so please help.

  Well, connect a cable from the router's Lan to the Lan port of the switch (for example Port 1 of the router to port 1 of the switch).

• Wired LAN undetected on a Satellite U940 after installing Win7 Pro

  Hello

  After replacement of the HDD in the Satellite U940-100 and the installation of win 7 Prof 64 b the wired lan device is not detected. According to the documentation, there should be a 'Fast Ethernet LAN' in the U940.

  On the Toshiba support site, there is a Realtek driver available, but no luck. During installation a message appears: Realtek network controller was not found. The network cable is plugged in, but no led indicator. On the router the giga bit led will blink.

  There is no unknown device left in the 'management of the computer--> device manager'.

  Went LAN so where? Any suggestions?

  Thanks in advance,
  Frans

  > There is no unknown device left in the 'management of the computer--> Device Manager. "
  And what is stated in the network adapters? Realtek network card is listed there?
  This is really strange.
  Try to set the BIOS to default settings and check again.

• How to set up Wi - Fi connection?

  I set up a wireless lan network at home, my laptop has detected the wireless LAN and he says it's connected, but I can't access the internet, it is constantly the access denied, can someone tell me how to configure my phone to have access to the internet (broadband)

  bozlem

  Hello

  It's not easy to say what is the problem with your router. Check the manual of the router. There should be a description of the configuration of this device.
  Please also see this page useful Wireless:
  http://www.Wi-Fi.org/OpenSection/windows_tips.asp?tid=2

  Concerning

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• How to set the text appears on the page when I rollover a button?

  I have a simple container with a background image with 9 buttons on the right side of the page.  As I rollover each key, I want an informative text to appear near the left center of the page... and then disappear when you rolloff button. Not sure how to set up.  I created everything but informative text.

  Anyone?... Thank you!

  Stephen

  Here's a quick example wired.  This solution is for a component that is customized with different States and applying interactions to the buttons to control the display and hiding of individual States (the text on the page).

  Best,

  Tanya

• new update of Apple Watch doesn't have My Watch tab. I can't understand how to set up friends or family ring

  I updated my Apple Watch with the latest version of the software that is 10 IOS. But the last update did not My Watch tab in the settings. I can't understand how to set up friends or family ring? Any help on this will be appreciated.

  Hello

  IOS 10 (as in the previous version of iOS), My Watch tab is located in the application of the watch (not in the settings).

  If you have also updated your Apple Watch to watch OS 3, note that the application of friends (accessed via the side button, with a circle of people) has been removed from the watch and that there is no direct replacement for this feature.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• How to set one of my pictures as a screen saver

  I can't understand how to set one of my own photos as the screensaver on my iMac... How do I do it please?

  System Preferences > desktop and screen saver > screen saver > select one of the modes that uses a table > screen saver Options > choose a folder...

  Made in regards to the BONES of the Mavericks.

  Clearly, it will work best when you have more than one image.

  I guess you mean screensaver and no paper painted (preferably same group)?

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set google as homepage

  How to set Google as my homepage on newly installed Windows 8.1

  There is a separate forum for questions of Firefox, but...

  In the MenuBar in FIREFOX, select Tools-Options-general

  The first two fields are to set the home page.

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the default android home page.

  How to set the home page in the latest browser of firefox for android?

  Hello:

  Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.

  Please read this article for instructions.

  I hope this helps!