Wired LAN undetected on a Satellite U940 after installing Win7 Pro

Similar Questions

• Dead by Satellite L350D after installing Win7

  Hello

  Sorry if this has been asked before - I had a quick glance is a big big forum...

  My Tosh Satellite L350D worked very well but had Vista OS (everything is said!)

  I ran a disc to upgrade to Windows 7 (32 bit) everything seems to be okay. After installation, the first thing I did was visit the Toshiba support for the graphics driver that I found, unpacked and loaded.

  At the end of installation, I was invited to reboot (it would be the first restart of the Win7 installation).

  He stops and died. The power light lights up but no disks don't spin up, no screen, no fan, nothing. I can stick to my ear, but nothing makes a sound.

  I can put in an operating system recovery disc (known to be good) and it runs briefly for a few seconds, but that's all.

  All I can think is somehow I killed the BIOS - any ideas how I can get this person?

  Thank you

  It's really stupid situation now. All you did was just and I can't imagine that the display driver Toshiba killed BIOS even if the symptoms are the same when the BIOS is damaged.

  Please do that Akuma wrote and post comments.

• NB550D-111 - can't change the display resolution after installing Win7 Pro

  Hi guys,.

  After you install a clean install of Windows 7 Professional I can't get resolution, more than 800 x 600.
  I went to the section of the driver and installed the good display driver for my NB550D-111: version 8.812.2.2 of the displaydriver.

  After a reboot, still nothing happens and I can't change the resolution.
  Trying to open the Catalyst Control Center results in nothing: I can't seem to open it.

  I spent hours and hours trying to solve this problem, but need help at the moment.

  See you soon,.

  Tim

  NB550D-111 has AMD HD graphics card 6250 and the same Satellite C660D (PSC1YE) or Satellite L775D (PSK5PE) then you can try using the display drivers for these laptops.

  I n t have experience with NBs and cannot confirm this will help, but you can try it and send feedback.

• 3110CT no sound after installing XP Pro

  I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.

  Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.

  Help, please.

  Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.

  If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.

  You bought this Portege as a second hand unit. Am I wrong?
  So maybe the sound card is faulty.

  The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
  Check if you can find an audio driver XP in internet.

• FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

  FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

  Hi Jim,.

  Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

  Kind regards

  DP - K

• Satellite U940 - after the update of Win8.1 FN key stop working

  I have ultrabook Toshiba U940-b484, after I updated my system windows 8.1 all FN keys does not work and after more try only up/down switch soung and brightness keys is just the word, and keyboard light switch is not working too, all solutions?

  Concerning

  I by Satellite U940-103 and I did Win8.1 with success. Everything works perfectly.
  My only solution is: Win8.1 update must be performed according to the instructions of update Toshiba Win8.1 instructions for installation and http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/ document which can be downloaded on Toshiba support and download page.

  Have you installed all the specific tools available Toshiba and utilities?

• Satellite A500 - sounds/images of default system lost after installing Win7

  Hello

  I bought a Toshiba Satellite A500 with Windows Vista and upgrade to Windows 7. After my installation of Windows 7, I lost all my icons of Toshiba and sounds, as silent image appears so hitting the button mute on the keyboard and the beep on hitting the sound up/down button.

  Before installing, I took a backup of a file from Toshiba and tried to install apps from Toshiba in the TOSHIBA\TOSAPINS folder there. But still not get the default values of the system.

  Would be very grateful if someone could help me to restore those back.

  See you soon,.
  Vikram.

  Hello

  I assume you mean on the menu that appears with the FN keys

  Usually after installing Win 7, you must reinstall the VAP (value added package) and utility Support Flash Cards in order to get the keys FN working again.
  You can download the two page from Toshiba Europe tools.

  I m not very good if you get the same sound that was available under Vista as Win 7 takes care of the own system alerts/sounds.

  But after the installation of VAP and Flash Cards Support utility, you should see the images that appear with the FN keys.

• Satellite U300-14Z - no sound after installing WIn7

  Hello!
  I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out that the * Device Manager has no audio device *. I reinstalled the system, is now a Windows7 Ultimate x 86 license.

  All options work, but the sound did not always appear. Installing the drivers doesn't help - * OS still does not see a sound card *. What could be the tools to solve the problem?

  Hi whooz,.

  Is that what you have already installed the audio driver from Toshiba Web site? As far as I know Satellite U300 supports Windows 7 32 bit then an audio driver should be listed and works because readers are pre-tested by Toshiba.

  But it is also important that you install the chipset driver and should be installed first. So start with installing the audio driver.

  Also, try to load the default settings in the BIOS.

• Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

  After Installing Win 7 on this CPU fan stop turning at all.

  Thus, when usage intensive pc shuts off due to the weather.

  I've been try bios update didn't etc no efect.

  Any idea?

  Hello

  It's very strange.
  Have you tried to reinstall Windows 7 again?
  I recommend you to repeat the installation of the OS!

  After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

  Last but not least go to BIOS (F2) and set it to default settings!
  Save the changes and exit the BIOS

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• Satellite A60 - lack of drivers after installing WXP Pro

  I installed XP Pro instead of XP home with the PC.
  I can't upgrade because of the other language.
  I downloaded all the drivers of your site, but after insttallation I still have a problem with the FireWire (lack of driver).
  Then I also checked that the drivers of toshiba sure power are missing too.
  What can I do?
  Best regards

  Hello

  on the driver download site, you can download the installation instructions. Follow this order of installation. Toshiba Power Saver utility can be downloaded from the pilot site, too.

  You can also use your CD tools & utilities. There you can find all the programs and drivers for XP. Doesn't matter if it's home or teacher, the drivers are the same. But maybe some drivers from the download site are updated to a newer version.

  Good bye

• Modem does not not after installing XP Pro

  I just installed XP PRO, including service pack 2, from scratch, on a Satellite Pro A10. I downloaded the latest drivers for modem from this site and install them. (several times). All anything will do, when querying the modem diagnostics tab all that I get is a message indicating that the com port cannot be opened. Is the modem on COM3. Can anyone help please? I tried the suggestions of the other posts, but nothing helps.

  [Edited by: admin on 23 May 05 21:08]

  Hello

  I'm not sure but I think that your camera comes with SP1. It is possible that some hardware components are on strike after installation of SP2. Try to reinstall the sound driver.

  Check it please this interesting page http://modemsite.com/56k/xptip.asp.

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Features of HDX18t not recognized after installing Win7

  After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

  As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

  What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

  I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

  Any suggestions?

  Hello:

  This is the base system device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The first unknown device that you posted that needs of pilots is that one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The second unknown device what you have listed is this one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  Paul

• Blurry display after installing XP Pro

  Inspiron 1720, Windows XP Pro sp2.

  I got 15 of them I need to Setup. Native systems with Vista. We are running applications that are not supported in Vista, so I'm wiping the readers and install XP Pro. Everything works fine. However, the display is not as crispy as in Vista.

  I installed the latest drivers for ' Mobile intel 965 Express Chipset Family ' site at support.dell.com. The strange thing is that after the restart and check on the screen briefly seems very clear, then the stove display flashes for 1/2 second and then returns to her fuzzy so.

  Message edited by pmarg on 10/02/2008 18:57