How to set up Fax on broadband

Similar Questions

• OfficeJet OfficeJet 7612: 7612 - how to set the fax to send only?

  OfficeJet 7612 - how to set the fax to send only? No need to get into the machine. Thank you, Noemi

  Hello

  If you go only to send faxes with this product, you should not disable the receive function to operate correctly. Are you problems with the part of fax machine or you just think you can turn this feature off?

  Thank you!!

• Not sure how to set up Windows Fax Scan &

  Original title: "Windows fax and scan"

  I'm not sure how set the computer to my phone... it is already connected to the internet... If I understand correctly... I think so..

  If you use a dial-up connection, then the line is indeed already used with the internet.  You can do this through the internet, and you may not use this same line while it is used for the internet.  You need an analog (non-digital) line separated with a fax modem or (one in your system) be bound separately or you need to switch back if it is a good analog line and you have everything you need to fax. Here's how to set up fax and scan:http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes.  Here's a FAQ on Windows Fax and scan, which can also help to answer your questions:http://windows.microsoft.com/en-us/windows-vista/Faxing-frequently-asked-questions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• setting up fax

  How to set up fax to operate directly from my computer running windows 7?

  See here: http://support.hp.com/us-en/document/c02080237

  Only a built in modem fax necessary.  If it is not present in the PC, then see this: http://faxauthority.com/windows-7-fax/

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set up my wireless connection?

  Hello, I have a satellite 1410/2410 I think and im not sure how to set up my wireless I rang bt broadband ordered a card wireless broadband from bt to get into my computer as I was told I need to 1, but it would not install, so I rang back bt and they said it was because I already have wireless on my computer and I had to get in touch with Toshiba and you tell me how to set up.
  Please help me!
  your sincerely M Diggin

  Hello

  I found the same info as Tobi. Your device has no WLAN and you must use the PCMCIA WLAN card. I'm sure that with PCMCIA card you will receive the CD with driver and probably some WLAN client for WLAN configuration. You can also use the WLAN Windows settings.

  Good bye

• How can I send faxes directly to the computer?

  I have an Officejet Pro 8500 a HP all-in-one.  My computer operating system is windows Vista home and the printer is connected wireless to my home network.  I want to know how to send a fax received from the printer directly to the computer without having to print on paper first.  Occasionally, my printer working ink or for any other reason, I'm not going to want to print a paper copy of a received fax.  I may still need to read the fax.  I wish I could print the faxes in my computer so I can read and print the latter if necessary. Thanks for the help. Jim

  Ah, I finally found!  It's an option under HP digital fax on the control panel of the product.  Thus, for some reason, the process with my printer was very complicated:

  1. I tried to configure digital facsimile from the control panel of the product.  He ordered me to use the software on the computer that comes with the printer; as well;

  2. I tried this software.  But the software I had installed my printer do not have an option for digital Fax, so;

  3. I went to the product HP digital fax option control panel that directed me to the built-in web server, therefore;

  4. I opened the built-in web server. But although this software has options for HP digital fax it doesn't have an option to stop printing paper, so;

  5. I had to go back to the product digital HP Fax option control panel and find the option to disable fax print it!

  Of course, at almost every step along the way that I should try to set up the printer, and then understand why it didn't work the way I wanted to and then go on the support forum, read page after page of messages, return to the printer, try various "solutions" online, then go back to forums, etc, etc. etc.  It seems that HP could do a much better job in the design of its product interface software so that customers did not have to spend as much time find answers to simple questions.

• HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?

  I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.

  I'm embarrassed to say that I spent several hours trying to get the speed dial to work on a M127fn.  It turns out that there really no speed dial.  That's the conclusion of at least a HP tech that actually used the machine.  Another tech was able to describe a way to fax a phonebook entry, but it is quite too complicated to be called a speed dial.

  [1] press the button settings (key).

  [2] press the right arrow to access the phone book.

  [3] press OK button.

  [4] use the right or left buttons to reach the desired phone book entry.

  [5] press the OK button to reveal the label for the entry, or "empty" if it is not set.

  [6] press the OK button if the element is set to display the fax or dialing options.

  [7] press FAX to initiate a fax to this phone book entry.

  My users find it much easier to have their phone numbers pasted on the machine where they can connect looking them to instead scroll through menus, for the right option.

  It seems that there is some sort of disconnect between hardware, firmware, and technical writers on this machine, because this ancient feature has been neglected, and the user guide is left to sputter on the issue.

• How to configure the fax service

  Fax

  do I need a phone number to set up the fax I use dsl

  Hi waawa1951,

  Yes, you will need a phone and number phone of fax on the installation computer.

  See the links for more information below.

  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  How to send a fax in Windows XP

  http://support.Microsoft.com/kb/306657

  Use your computer to print, scan, fax

  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/printfaxscan.mspx

• Can't set the fax modem in Win Fax & scanning. I get the error "an error has occurred. Try again or contact your system administrator. »

  Original title: can't set the fax modem in Win Fax & scanning

  I have install Vista Pro on my laptop at home with me and wife that both put in place as administrators. I recently reinstalled (Clean) Windows Vista and am trying to reload all data and software.

  I have successfully set up Win Fax under my account and power send & receive faxes, but when I tried to put in place the fax under my wife account I get the error prompt:

  "An error has occurred. Try again or contact your system administrator. »

  Prior to the re - install, I have had no trouble creating and directing Win Fax in both accounts.

  I tried to remove and re-create the account of my wife, but all without success. It is a major pain because it is my wife who is the main user of the service of fax for his work.

  Help, please...

  Hi HamptonBirds,
   
  (1) what is the brand and model of your fax machine?
   
  Follow these steps in the order of appearance and check if it helps to solve the problem.
   
  Step 1:
   
  Verify that the following services are defined as follows, and you can start each service:
   
  a. click on start
  b. in the type of search option 'services '.
  c. now, make sure that the services below are the following:
   
  Connections - Manual
  Telephony - manual
  Remote access connection manager - Manual
  COM + Event System - Manual
  Remote Access Auto Connection Manager - manual
   
  Step 2:
   
  Turn off ADM (Windows Fax and Scan)
   
  a. click on start
   
  (b) in the search box, type "regedit".
   
  c. find HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts, delete all the keys to void.
  
  d. run WFS high the first time. This should allow to recreate the appropriate accounts.
   
  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I am runing vista and do not know how to use the fax machine

  I am runing vista and do not know how to use the fax machine

  Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes.  Navigate the reference links on the right for more information on how to send faxes and other information.  If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative.  After that, you must be an expert on this subject.

  Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.

  Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium.  In the latter, you need a 3rd party program.  If this is the case, here are some options:

  With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:

  Not available in Vista Home Premium Basic FAX. It is available in complete edition,
  Extreme and business.

  You might want to consider Snappy Fax at a low cost:
  http://www.snappysoftware.com/

  or the free version of BVRP:
  http://www.usr.com/BVRP/bvrp.asp

  or a full BVRP Classic Phone Tools 9: $29.90
  http://www.shop.Avanquest.com/USA/PR...S_CPT_homepage

  Look screen kinda gross but the product Snappy fax
  actually, is quite rich in features and works very well. BVRP also works very well,
  screen looks a bit better. Other that that, there are minor differences
  performance between the two.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OfficeJet Pro 8610 - error setting up Fax Wizard I don't use a proper phone cord

  I have a single line by Time Warner Cable telephone system that is a set which includes the cable TV, internet connection of road runner and digital phone. I use a system of wireless phone with a stand-alone answering machine which works very well.

  I'll just put up my new printer Officejet Pro 8610 and crossed the Fax Setup Wizard to use my voice single line telephone and fax system just as I did with my old HP Multifunction printer it replaces.

  Everything seemed to connect and to work very well when one had the Fax Wizard to perform the test at the end of the installation procedure. As a precaution, I ran the consecutive times to test with the answering machine turned on and turned off and twice he spent in all categories, and once it failed to indicate that the phone cord was not the right kind.

  I used the RJ11 cable supplied with the printer, but it wasn't enough long reach the phone in the wall jack that I connected an additional RJ11 cord so it would reach. So the two cords to have only 2 pods as they should.

  I am trying to determine why I get together and pass and fails with the same set up?  If I need one RJ11 telephone plug cord in the wall to the printer?  Or am I running a subsequent wizard test too soon after a previous?

  I would appreciate any comments or suggestions about the reason that I feel this inconsistency.

  Thank you

  Hi coollx,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8610 is indicating that you are using the wrong phone cord. I'm happy to help you with this problem of Fax!

  It is possible that what you need is a cord of unique phone from the telephone jack in the wall to the printer.

  I recommend to read these faxes guides:

  • How to connect your fax HP to a line ISDN, ADSL, PBX or VoIP device.
  • Can't send or receive faxes.

  I hope this information helps and thank you for posting!

• How do you get faxes in professional vista?

  In fax and scan, it describes how to send a fax and scan, but it does not say how you receive faxes.  do you need to leave your broadband?  How to register a fax number on cards?

  To use the Fax require you as a fax activation of the modem and a standard phone line. You cannot use fax via a broadband connection (unless you subscribe to a fax via email service)

• How to acquire a fax #.

  How to acquire a fax #.

  How can I configure a fax

  You call your phone company and a fax line.

  You follow the instructions in the manual to set up the fax.

• new update of Apple Watch doesn't have My Watch tab. I can't understand how to set up friends or family ring

  I updated my Apple Watch with the latest version of the software that is 10 IOS. But the last update did not My Watch tab in the settings. I can't understand how to set up friends or family ring? Any help on this will be appreciated.

  Hello

  IOS 10 (as in the previous version of iOS), My Watch tab is located in the application of the watch (not in the settings).

  If you have also updated your Apple Watch to watch OS 3, note that the application of friends (accessed via the side button, with a circle of people) has been removed from the watch and that there is no direct replacement for this feature.